Panasonic Hc V270 Owners Manual

							- 111 -
≥The Eye-Fi menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to  operate in the future due to 
changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using  the software supplied with the Eye-
Fi card before use.
≥ When the endless memory function of the Eye-Fi card is set to o n, the files transferred from the 
card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the files being tran sferred. Note that the use of an 
Eye-Fi card accelerates the battery drain, so we recommend you  use the card in Playback Mode.
≥ The Eye-Fi setting can be checked while pausing the recording.
≥ If the Eye-Fi card is removed and then reinserted into the unit , set functions related to Eye-Fi 
again from the menu.
≥ When using the Eye-Fi card, please be sure to unlock the write- protect switch. (l13)
≥ Before deleting the files, please confirm they have been transf erred to your PC and uploaded to 
the sharing site.
≥ Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as 
inside aircraft etc.
≥ Depending on network conditions , the transfer may take some time. Also, if network conditions 
deteriorate, the transfer may be suspended.
≥ Files over 2 GB in size cannot be transferred. Such files shoul d first be split to reduce the file size. 
( l 91)[Eye-Fi TRANSFER] is set to [ON]
(Transferring in Eye-Fi direct mode)
[Eye-Fi TRANSFER] is set to [ON]
[Eye-Fi TRANSFER] is set to [OFF] 
						

							- 112 -
∫
Use this unit as a wireless LAN device
When using equipment or computer systems that require more reli able security than wireless LAN 
devices, ensure that the appropriate measures are taken for saf ety designs and defects for the 
systems used. Panasonic will not take any responsibility for an y damage that arises when using this 
unit for any purpose other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this unit is presumed to be in cou ntries 
where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in countries other than those 
where this unit is sold, and Panasonic takes no responsibility  for any violations.
∫There is the risk that data sent and received via radio waves m ay be 
intercepted
Please note that there is the risk that data sent and received  via radio waves may be intercepted by 
a third party.
∫ Do not use this unit in areas with magnetic fields, static elec tricity or 
interference
≥ Do not use this unit in areas with magnetic fields, static elec tricity or interference, such as near 
microwave ovens. Radio waves may not reach this unit.
≥ Using this unit near devices such as cordless telephones or any  other wireless LAN device that 
use the 2.4 GHz radio wave band may cause a decrease in performa nce in both devices.
∫Do not connect to the wireless network you are not authorized t o 
use
When this unit utilizes its Wi-Fi function, wireless networks w ill be searched automatically. When 
this happens, wireless networks that you are not authorized to  use (SSID*) may be displayed, 
however do not attempt to connect to the network as it may be c onsidered as unauthorized access.
* SSID refers to the name of device that is used to identify a n etwork over a wireless LAN 
connection. If the SSID matches for both devices, transmission  is possible.
∫Before use
To use a Wi-Fi function with this unit, you need a wireless access point or destination device 
equipped with a wireless LAN function.
≥For the operations and settings of your device such as the smar tphone, please read the 
operating instructions of the device.
∫ This unit is NFC-compatible
Using the NFC (Near Field Communication) function, you can easi ly transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with A ndroid™ (OS version 2.3.3 or 
later). (Except for some models)
∫ This unit is WPS-compatible
WPS (Wi-Fi Protected Setup™) is a function that allows you to e asily set up a connection with a 
wireless LAN device and make security-related settings.
Wi-Fi
Wi-Fi® function 
						

							- 113 -
≥This unit cannot be used to connect to a public wireless LAN co nnection.
≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device  when using a wireless 
access point.
≥ This unit uses the 2.4 GHz frequency band. You cannot establish  a wireless LAN connection 
using the 5 GHz frequency band.
≥ When using a wireless access point, we strongly recommend that you set a encryption to 
maintain information security.
≥ When sending 
scenes or still pictures, we recommend you use the AC adaptor. If you  are using 
the battery, we recommend you use the fully charged one.
≥ When sending motion pictures or still pictures on a mobile netw ork or tethering, high packet 
communication fees may be incurred depending on the details of  your contract.
≥ This unit may not connect to a wireless access point depending  on the radio wave condition.
≥ When motion picture or still picture transmission is not succes sful, point the Wi-Fi transmitter 
( l 9) at the wireless device (smartphone, etc.).
≥ When the battery indicator is flashing red, the connection with  other equipment may not start or 
the connection may be disrupted.
≥ The Wi-Fi transmitter may become warm when using the Wi-Fi func tion; however this is not a sign 
of a malfunction. ( l9) 
						

							- 114 -
Using a smartphone, you can perform record/playback operations from a remote location or upload 
motion pictures and still pictures recorded in this unit on SNS  (Social Networking Service).
A When connecting directly to a smartphone
B When connecting to a wireless access point
≥ Refer to [Help] in the “Image App” menu about how to operate.
Preparations before using [Link to Cell]
1 Install the smartphone application “Image App” on your smartpho ne. (l141)
2 Check if the smartphone is an Android (NFC-compatible), Android  (non-NFC-
compatible), or iOS device.
≥ If the smartphone is NFC-compatible, the NFC mark is displayed when you start up “Image App”.
Using NFC, you can easily set up a direct connection between th is unit and the smartphone.
∫If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the  smartphone.≥Proceed to “Using [Link to Cell] with a direct connection”. ( l11 6 )
Wi-Fi
[Link to Cell]
≥You need to turn on the Wi-Fi function of your smartphone.
≥ Do not remove the SD card during remote operations.
Caution:
Be sure to pay special attenti on to the privacy, the Portrait rights, etc. of the subject when you use 
this function. Use at your own risk.
Setting up a direct Wi-Fi connection between this unit and a 
smartphone 
						

							- 115 -
∫
If the device is Android (n on-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connect ion.[HC-V270PP] : 
Enter SSID and Password or scan QR code to connect.
≥[WPS Connection] ( l148 )
≥ Connecting with QR code ( l149 )
≥ Connecting by entering an SSID and Password ( l149)
When the Wi-Fi connection is complete, proceed to “Using [Link  to Cell] with a direct connection”. 
( l 11 6 )
1 Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥[WPS Connection] ( l145 )
≥ Searching for wireless access points to set up a connection ( l146)
≥ Setting up a connection manually ( l147 )
When the Wi-Fi connection is complete, proceed to “Using [Link  to Cell] with a wireless access point 
connection”. ( l11 7 )
≥Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connectio n in conjunction with the 
smartphone application “Image App”. ( l143 )
Setting up a Wi-Fi connection via a wireless access point 
						

							- 116 -
Using [Link to Cell] with a direct connection
∫If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to on.
1Start up the smartphone application “Image App”.
2Touch the smartphone on   of this unit.≥Touch the NFC touch area when the NFC mark is displayed on 
the smartphone screen.
≥ If this is the first time the sm artphone is connecting to this  unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not recognized even when touching the smartphone , 
change positions and try again.
≥
The connection cannot be established while this unit is recording.≥ When the connection is complete , images of this unit is displayed on the smartphone screen.
≥ This unit is turned on even if i t touches the smartphone on   of  this unit, where this unit is 
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that has been co nnected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recordi ng or copying a file to the 
smartphone during remote operations.
∫ If the device is Android (n on-NFC-compatible) or iOS
Proceed to Step 2 when your Wi-Fi connection has been made via  [Direct Connection] in [Wi-Fi 
Setup] ( l148 ).
1Press Wi-Fi button on this unit and touch [Link to Cell]. ≥It will go into connection standby for remote operation.
2Start up the smartphone application “Image App”.≥When the connection is complete , images of this unit is displayed on the smartphone screen.
To exit [Link to Cell]:Touch [EXIT] or press Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication.
≥After turning off this unit with the LCD monitor, you can also  turn on this unit and start the NFC 
communication by touching the smartphone on   of this unit. (If  you have turned off this unit 
with the power button, this uni t will not turn on by touching the smartphone on   of this unit)
≥ If you touch an NFC-compatible smartphone on this unit, you can  register up to five smartphones. 
When the number exceeds five, registrations will be deleted, st arting from the oldest touched one.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone. 
						

							- 117 -
Using [Link to Cell] with a wireless access point 
connection
∫If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to on.
1Connect the smartphone to a wireless access point.≥When you connect using NFC for  the first time, please make connection of this unit and a 
wireless access point. ( l145 )
2Start up the smartphone application “Image App”.
3Touch the smartphone on   of this unit.≥Touch the NFC touch area when the NFC mark is displayed on 
the smartphone screen.
≥ If this is the first time the sm artphone is connecting to this  unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not recognized even when touching the smartphone , 
change positions and try again.
≥
The connection cannot be established while this unit is recording.≥ When the connection is complete , images of this unit is displayed on the smartphone screen.
≥ This unit is turned on even if i t touches the smartphone on   of  this unit, where this unit is 
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that has been co nnected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recordi ng or copying a file to the 
smartphone during remote operations.
∫ If the device is Android (n on-NFC-compatible) or iOS
1Connect the smartphone to a wireless access point.
2Press Wi-Fi button on this unit and touch [Link to Cell]. ≥It will go into connection standby for remote operation.
3Start up the smartphone application “Image App”.≥When the connection is complete , images of this unit is displayed on the smartphone screen.
To exit [Link to Cell]:Touch [EXIT] or press Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication. 
						

							- 118 -
≥After turning off this unit with the LCD monitor, you can also  turn on this unit and start the NFC 
communication by touching the smartphone on   of this unit. (If  you have turned off this unit 
with the power button, this uni t will not turn on by touching the smartphone on   of this unit)
≥ If you touch an NFC-compatible smartphone on this unit, you can  register up to five smartphones. 
When the number exceeds five, registrations will be deleted, st arting from the oldest touched one.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone.
About [Link to Cell]
Smartphone screen shots are examp le displayed in Motion Picture Recording Mode and Playback 
Mode.
≥ Depending on your OS or the version of the smartphone applicati on “Image App”, the screens 
may differ from the ones above.
Screen display during remote operations
Recording screen
1
Recording media/remaining recordable time2Remaining battery power of this unit
3 Zoom
4 Photoshot button
5 Menu display
6 Playback mode button
7 Recording mode button
8 Recording start/stop button
9 Motion Picture Recording Mode/Still 
Picture Recording Mode toggle button
: Name of the connected device
Playback screen
1Camera function button
2 Number of scenes
3 Remaining battery power of this unit
4 Delete
5 Upload
6 Copy
7 Name of the connected device
8 Scene information display
XXXXXXXXXXXXXXXXXX


\b



R 1 h 20 min
XXXXXXXXX
1/16
AVCHD_0001
2015/12/15 15:30:50

\b




 
						

							- 119 -
∫
In Recording Mode
≥Recording motion pictures/still pictures
≥ Selecting a mode
≥ Using the zoom (Available in the medium or fast speed)
≥ Switching between the Recording Mode:
jIntelligent Auto Mode
j Manual Mode
≥ Recording format
≥ Picture size
≥ White Balance
≥ Backlight Compensation
≥ Night Mode
≥ Self-timer
≥ Turning the unit off
∫ In Playback Mode
≥Playback
≥ Switching between thumbnails (AVCHD/MP4/Still picture)
≥ Delete
≥ Save (Copy)
jScenes recorded in AVCHD cannot be copied.
j Scenes recorded in iFrame can only be copied with iOS devices.
j Depending on your smartphone, scenes recorded in MP4 format may not be copied.
≥ Smart Home Network
jIt is possible to post to SNS or perform playback operation when this unit is connected to the 
DLNA-compatible TV via wireless access point using a smartphone .
≥ Creating and saving scenes with Highlight Playback 
(Highlight Playback cannot be used for MP4/iFrame scenes)
≥ Highlight Photo Collage
jParts that were recognized as clearly recorded are automaticall y extracted from multiple 
scenes and saved as still pictures. (Not available for MP4/iFra me scenes.)
j In addition, the multiple still pictures you have captured can  be put in a frame and saved as a 
single still picture.
≥ Creative Control Mode will not be available.
≥ If you record an image when the LCD monitor of this unit is clo sed with the screen facing outward, 
the LCD monitor turns off.
Functions available for remote operations 
						

							- 120 -
You can use your smartphone to check on your baby being monitored by this unit when you are in 
another room. The smartphone and this unit can be used like rad io transceivers, allowing the users 
to have a conversation by taking turns. This unit can also send  a notification to the smartphone 
whenever the baby cries.
Preparations before using [Baby Monitor]
1 Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Install the smartphone application “Image App” on your smartpho ne. (l141)
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥[WPS Connection] ( l145 )
≥ Searching for wireless access points to set up a connection ( l146)
≥ Setting up a connection manually ( l147 )
When the Wi-Fi connection is complete, proceed to “Using [Baby  Monitor]”.
≥Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connectio n in conjunction with the 
smartphone application “Image App”. ( l143 )
Wi-Fi
[Baby Monitor]
≥You need to turn on the Wi-Fi function of your smartphone.
≥ If [CLOCK SET] ( l19) is not set correctly, the sound detection function will not w ork 
( l 121 ).
≥ Notifications cannot be sent to more than one smartphone.
≥ Check your contract details carefully, as smartphone and intern et contract details may 
result in high communication charges being incurred, or a limit  placed on 
communication traffic.
Caution:
≥ It is the responsibility of parents or guardians to check on th eir child. Use [Baby Monitor] 
only as an aid.
≥ Place this unit so that it will be out of the reach of the baby .
XXXXXXXXXXXXXXXXXX