Panasonic Electronic Print Board KX-BP800 Operating Instructions

61
Using
View Window or Whiteboard Window Operation
(2) The following items can be set.
(3) Click the [OK] button.
[Export Image Files] group
Image Size: To change the size when saving a page as an image file, enter a desired \
width and
height.
Check (turn ON) the [Constrain Proportions] check box when setting the\
 aspect ratio of
the page to an identical value even if the page dimensions change while \
saving it as
the image file.
JPEG: To set the quality level when exporting a page as a JPEG format...

62
(1) Click [Options...] in the [Settings] menu.
C C
The Options dialog box will appear.
(2) The following items can be set.
Display full path in Title bar:  To display the full path of the currently opened file in the title bar of the View
window or the Whiteboard window, add a check mark (turn ON).
Measurement:  To switch the display unit system of the Whiteboard window.
(3) Click the [OK] button.
View Window or Whiteboard Window Operation
C C
Option setting
Set the display method of the file name in...

63
Using
Remote Conferencing using Microsoft®NetMeeting®
nAbout NetMeeting®
nExample of using NetMeeting®
Microsoft®NetMeeting®is a software to share information with the computer connected in the ne\
twork. When the
Interactive Panaboard is connected with the computer connected in the ne\
twork and NetMeeting®is used, it is
possible to confer on the remote place using the Projector mode or the W\
hiteboard mode of the Interactive
Panaboard Software.
It is necessary to install NetMeeting
®in each...

64
Remote Conferencing using Microsoft®NetMeeting®
CYou cannot call people on the Internet that you have located on Wed-based directory servers if your Internet
connection uses a proxy server that does not support NetMeeting®.
CWhen you share a program and decide to allow someone to control it, remote users can use the File Open
and File Save dialog boxes in your program to gain access to or delete files on your computer or network.
It is recommended that you do not leave your computer unattended while...

65
Help
Cleaning the screen and the unit
Gently wipe the screen film and unit with a water-dampened
cloth that has been thoroughly wrung.Use a commercially available white board cleaner for 
hard-to-clean stains. (SANFORD
®EXPO®white board
cleaner etc.)
If you accidently write on the board with an oil-based
marker, wipe with a small amount of ethyl alcohol.
Daily Care and Maintenance
Always turn off the power switch and unplug the power plug when cleaning\
 outside and inside the unit.
C Do not use...

66
Daily Care and Maintenance
Clean the Printer Head
Printer Head
(Gold)
Cotton Swab2Dampen the tip of a cotton swab in ethyl
alcohol and gently wipe the printer head.
CNever touch the printer head or the surrounding
area with your hands as this may disable
copying.
Note
Clean the Platen Roller and the Feed Roller
Feed Roller
Platen
Roller
Printer Door
3Remove the film cassette with both hands and
carefully wipe any dirt or stains off the platen
roller and feed roller.
CFor details on removing the film...

Help
67
Daily Care and Maintenance
Treat problems according to the information given in the table below. If\
 problems still persist, call your dealer for service.
Replacing the Batteries in the Electronic Pen and the Electronic Eraser
As the lifetime of the batteries in the Electronic Pen or the Electronic\
 Eraser comes near to the
end, the message “Low Battery” appears on the PC screen to which t\
he electronic print board is
connected using interactive functions. When this message appears, get ne\
w...

68
Troubleshooting
The screen does not
advance when the COPY
or ADVANCE keys are
pressed. 
Static electricity was generated when the screen film was wiped.
Turn off the power and slowly move the screen by hand.
Contrast/Remaining 
film indicator flashes.The time to replace the thermal transfer film is approaching. (Only about 15 more
copies can be made.) 
Prepare a new replacement film (KX-BP081 or KX-BP082).
Data written on the
electronic print board may
disappear from the
electronic print board
screen...

Help
69
Troubleshooting
n
Meanings of various displays
The following table describes the meaning of each of the symbols which m\
ay flash in the Multi-Copy/Error indicator.
IndicationSee
PageCauseRemedy
Out of paper.
The printer door is not closed securely.
The thermal transfer film is slack or has run
out.
Paper jam.
The screen will not move.
The room temperature is 10°C (50°F) or lower. Load copy paper.
Close the printer door securely.
Remove the slack from the thermal transfer film
or replace.
Open...

48 hours [Continuously at 25°
C (77°
F)]
When using Panasonic “LR03” (“AAA” size) alkaline batteries.
70
Specifications
Model NumberKX-BP800
Power SupplyAC100 -120 V, 50/60 Hz
General
Power Consumption
(Operational/Standby)2.2 A/ 0.1 A
External Dimensions
Height5Width5
Depth
1,40051,5505240 mm (4 71/855 11/32597/16)
Screen Size1,651 mm (65) Diagonal
Weight (without stand)34.0 kg (75 Ibs)
Ambient Operating Conditions
Writing Implements
Dry erase felt-tipped markers (black, red, blue and green*)
The green...