Panasonic Electronic Print Board KX-BP800 Operating Instructions

31
Using
Using the Interactive Panaboard Software
CAdjustment
The Electronic Pen or the Electronic Eraser position may largely shift b\
y the
using environment. In this case, adjust the position according to the fo\
llowing
procedures to improve the shifted position.
(1) Right-click the icon  in the Taskbar and click [Settings] ·
[Adjustment...] in the pop-up menu.
C
C
The Adjustment dialog box will appear.
(2) Place the Electronic Pen at the center of the Interactive
Panaboard screen and drag slowly the...

32
Projector Mode
Electronic Print Board Position Receiver
50mm (2)
Position Receiver
Interactive
Upper Limit Mark
Interactive Upper 
Limit Mark
Screen Film
Projector
35mm
(13/8) 100mm (1
3/8)
100mm (1
3/8)
35mm
(1
3/8)
CWhen using a projector to project images, be sure to display the image so that it is centered left-to-right
on the electronic print board screen and with at least a 50 mm (2) gap between the top of the image
and the screen border. Note that the Electronic Pen does not always operate...

33
Using
Projector Mode
n Basic operation flow in Projector mode
This section explains the flow of basic operations when using the Intera\
ctive Panaboard Software in the Projector
mode. We recommend trying the operations in accordance with the followin\
g steps to help you completely
understand the operations in the Projector mode.
CFor any explanations on the operations of the Projector mode, the Electr\
onic Pen will be referred to as Mouse
and the projected computer screen on the Interactive...

34
Projector Mode
CUse the Electronic Pen as a mouse
After the calibration is completed, the Electronic Pen can be used as a mouse for the projected computer screen
on the Interactive Panaboard.
CIf double-click does not work properly, confirm that the same position is accurately clicked twice. 
When the position is different, it is not recognized a double click.
Or, try different timing of depressing and releasing of the Electronic Pen. This operation is also depending on
the setting of the double-click...

35
Projector Mode
Using
CRecord image and handwritten lines data on the Desktop
Data of handwritten lines drawn or erased on the Desktop using the Deskt\
op Drawing Tool can be recorded in
Interactive Panaboard format files (extension .ipb, referred to as IP\
B documents) along with the initial Desktop
image.
Written or erased handwritten lines are recorded in stroke units and can\
 be displayed, played back and edited
later in the View window.
(1) Click  (REC Start) in the Desktop Drawing Tool.
CIf...

36
Projector Mode
CMany different operations can be executed in the displayed IPB document.
Save the IPB document in another file format. (See page 50.)
Switch a page of the IPB document. (See page 54.)
Edit a page of the IPB document. (See page 54.)
Playback the IPB document. (See page 57.)
Print the IPB document. (See page 58.)
nAbout Desktop Drawing Tool
The Desktop Drawing Tool is a tool for drawing, erasing, recording, etc. on the Desktop.
In the Projector mode, click [Tool] · [Draw] in the pop-up...

37
Using
Projector Mode
REC Stop: Stop recording and store the recording data.
Page No.: Display the page number which is being recorded.
Before recording, it is (0). When the Recording start button is depres\
sed, it 
displays as (1), and following pages will be numbered accordingly.
New Page: Saves current page recordings and starts the process to record the next \
page. Selecting this icon will stop the recording of the current page. The rec\
ording 
process will be paused while the current page is...

(1) Click  (Setting) in the Desktop Drawing Tool.
C C
The Marker/Eraser Setting dialog box will appear.
(2) To change the width of the markers, either enter a 
width in  (Marker Width) at the right side
of the marker whose width will be changed or click the up/down arrows on the right side to
set a desired width.
To change the color of the markers, click  (Marker Color) on the right side of the
marker whose color will be changed. The Color dialog box will appear. Click the color you
want to change from...

39
Using
Projector Mode
(1) Click  (Refresh) in the Desktop Drawing Tool.
C
C
Redisplay handwritten lines drawn on the Desktop
Handwritten lines drawn on the Desktop may be hidden or shifted when an \
application or a window are
operated. If this occurs, redisplay the Desktop.
C
C
Save Desktop in image file
Save the background image of the Desktop and handwritten lines that were\
 drawn on the Desktop as an image
file.
(1) Click  (Capture) in the Desktop Drawing Tool.
C
C
The Save As dialog box will...

40
Projector Mode
(1) Click  (REC Start) in the Desktop Drawing Tool.
C C
If there are drawn lines on the desktop, a verification dialog box will appear to confirm whether to
erase drawings.
To erase the drawn lines and start recording, click [Yes] button.
To leave the drawn lines and start recording, click [No] button. In this case, drawn lines become a
part of background image.
C C
The image of the Desktop will be displayed in a dialog box.
(2) Click the [OK] button to store the data as the background...