Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 81
[AI]
Enable/disable the AI correction function (automatic gradation control). When it is enabled, gradation control is 
performed in accordance with the projected image, making the image optim\
al with contrast.
1) 
Press 
 as to select [AI].
2)
 
Press 
 qw or the  button.
 fThe 

[AI] individual adjustment screen is displayed.
3)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Enables the AI correction...

Chapter 4 Settings — [PICTURE] menu
82 - ENGLISH
2) Display the [PICTURE] menu.
 fRefer to “[PICTURE] menu” (

x   page   76).
3)
 
Press 
 as to select [PICTURE MODE].
4)
 
Press 
 qw to set [NATURAL].
5)
 
Press 
 as to select [COLOR].
6)
 
Press the  button on the remote control to set the factory default setting.
7)
 
Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERA
 TURE], [WHITE GAIN], [GAMMA], and [SYSTEM 
DAYLIGHT VIEW] to the factory default settings.
Note
 f sRGB is available for RGB signal...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 83
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
Note
 f When the optional DIGIT AL LINK output supported device (Model No.: ET- YFB100G, ET- YFB200G) is connected to the  terminal, adjust the shift, aspect, and clock phase from the menu of DIGIT AL...

Chapter 4 Settings — [POSITION] menu
84 - ENGLISH
[VID AUTO]*2The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC 
signals.
[THROUGH] Displays images without changing the resolution of the input signals.
[16:9] Displays images with the aspect ratio converted to 16:9 when standard si\
gnals are input
*3. Display 
images without changing the aspect ratio when...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 85
2) Press the  button.
 fThe 

[ZOOM] screen is displayed.
3)
 
Press 
 as to select [MODE].
4)
 
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select [INTERLOCKED].
6)  
Press 
 qw to switch the item.
[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON] Uses [BOTH] to set zoom...

Chapter 4 Settings — [POSITION] menu
86 - ENGLISH
[PC-1]*1Performs geometric adjustment using the computer.
The optional Upgrade Kit (Model No.: ET-UK20) is required.
[PC-2]*1
[PC-3]*1
*1 Only for PT-
DZ780.
Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer . Up to three geometric adjustments 
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED].
3)...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 87
[CURVED]
[VERTICAL BALANCE]
[HORIZONTAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
Setting [CORNER CORRECTION]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 fThe 

[GEOMETRY:CORNER CORRECTION] screen is displayed.
4)
 
Press 
 as to select the item to adjust, and press the  button.
5)
 
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER...

Chapter 4 Settings — [ADVANCED MENU] menu
88 - ENGLISH
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when 
the PAL (or SECAM) 576i signal, the NTSC 480i...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 89
Blanking correction Item OperationAdjustmentRange of adjustment
Left side of the  screen [LEFT]Press w.
The blanking zone 
moves to the right.
PT-
DZ780: Left to right 
0 - 959
PT
-

DW750: Left to right  0 - 639
PT
-

DX820: Left to right  0 - 511
Press q.
The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press q.
The blanking zone 
moves to the right.
Press w.The blanking zone 
moves to the left.
[INPUT RESOLUTION]
You can...

Chapter 4 Settings — [ADVANCED MENU] menu
90 - ENGLISH
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamle\
ssly overlapped by using the inclination 
of the brightness at the overlapped area.
1) 
Press 
 as to select [EDGE BLENDING].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Sets the edge blending function to off.
[ON] Use the setting value preset in the projector for the inclination of the\
 edge blending area....