Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
3) Press asqw to select an item.
[LAST USED] Keeps the input selected last.
[RGB1] Sets the input to RGB1.
[RGB2] Sets the input to RGB2.
[DVI
- D] Sets the input to DVI
- D.
[HDMI] Sets the input to HDMI.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[SDI]
*1Sets the input to SDI.
[INPUT1] - [INPUT10]
*2Sets the input to DIGITAL LINK, and switches the input of Panasonic twisted-pair-cable transmitter to 
the specified input.
*1 Only for PT-...

Chapter 4 Settings — [PROJECTOR SETUP] menu
122 - ENGLISH
2) Press the  button.
 fThe 

[RS-232C] screen is displayed.
3)
 
Press 
 as to select [(OUT) BAUDRATE].
4)
 
Press 
 qw to switch the item.
[9600] Select the proper speed.
[19200]
[38400]
5) Press  as to select [(OUT) PARITY].
6)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the response
1) Press  as to select [RS-232C].
2)  
Press the  button....

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
3) Press qw to switch the pages.
 fThe page will change each time you press the button.
[PROJECTOR TYPE] Displays the projector type and serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LAMP1]
*3Displays the runtime and status of the lamp 1.
[LAMP2]
*3Displays the runtime and status of the lamp 2.
[MAIN/SUB VERSION] Displays the main and sub versions of the firmware of the projector .
[INTAKE AIR TEMP.]...

Chapter 4 Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
Note
 fE-mail including the content of status can be sent to the E-mail addresses (up to two addresses) set in “[E-mail set up] page” ( x   page   153) 
by pressing the  button while displaying the  [STATUS] screen.
 fSome items in [SIGNAL

 INFORMATION] may be displayed and others not displayed, depending on the signal being input.
 fIf any abnormality has occurred on the projector

, pressing the  button while the [STATUS] screen is displayed...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 125
Setting the time zone
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 fThe 

[DATE AND TIME] screen is displayed.
3)
 
Press 
 as to select [TIME ZONE].
4)
 
Press 
 qw to switch [TIME ZONE].
Setting the date and time manually
1) Press  as to select [DATE AND TIME].
2)  
Press the  button.
 fThe 

[DATE AND TIME] screen is displayed.
3)
 
Press 
 as to select [ADJUST CLOCK].
4)
 
Press the  button.
 fThe 

[ADJUST CLOCK] screen is...

Chapter 4 Settings — [PROJECTOR SETUP] menu
126 - ENGLISH
[DLE030]Select this item when the fixed-focus lens (Model No.: ET- DLE030) is used.
Move the lens to the ET- DLE030 standard lens position after completing the calibration.
3) Press the  button.
 fThe confirmation screen is displayed.
4)

 
Press 
 qw to select [OK], and press the  button.
 fT

o cancel, select [CANCEL].
 fThe lens moves up, down, left, and right to automatically detect the len\
s shift limit value, and automatically 
set the home...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 127
[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure descr\
ibed in “Deleting the 
registered signal” (
x
  page   131).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the  button.
6)  
When the confirmation screen is displayed, press  qw

 to...

Chapter 4 Settings — [P IN P] menu
128 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1)
 
Press 
 as to select [P IN P MODE].
2)
 
Press the  button.
 fThe 

[P IN P MODE] screen...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 129
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[SUB WINDOW] The sub window has display priority.
[MAIN WINDOW] The main window has display priority.
Note
 fThe P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display 
combination list” ( x
  page   185) for details.
 fThe main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA],...

Chapter 4 Settings — [TEST PATTERN] menu
130 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input 
signal before performing various adjustments.
1)
 
Press 
 qw to...