Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 91
14) Press as to select an item, and press qw to adjust the setting.
 fOnce the adjustment is completed, press the  button to return to the  [BRIGHTNESS ADJUST]

 
screen.
15)
 
Press 
 as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].
16)
 
Press 
 qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
17)
 
Press 
 as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONE 
AREA], or [RIGHT...

Chapter 4 Settings — [ADVANCED MENU] menu
92 - ENGLISH
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1Simplifies the image processing to reduce image frame delay.
[FIXED]
*2Sets image frame delay to be constant regardless of the image position or magnification.
*1 When input signals are other than interlaced signals, [F AST] cannot be set.
*2  
Only when movie-based signals and still image signals with the vertical scanning...

Chapter 4 Settings — [DISPLAY LANGUAGE] menu
ENGLISH - 93
[DISPLAY LANGUAGE] menu
On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fPress 

as to select a language, and press the  button to set.
Changing the display language
You can select the language of the on-screen display.
ENTER
DISPLAY LANGUAGE
SELECT
SET
 fVarious menus, settings, adjustment screens, control...

Chapter 4 Settings — [DISPLAY OPTION] menu
94 - ENGLISH
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously\
.
Adjusting the color matching as desired
1) Press  as to select [COLOR...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 95
Adjusting the color matching using a colorimeter
Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], 
[GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] to desired colors.
1) 
Press 
 as to select [COLOR MATCHING].
2)
 
Press 
 qw to select [MEASURED].
3)
 
Press the  button.
 fThe 

[MEASURED MODE] screen is displayed.
4)
 
Press 
 as to select [MEASURED DATA].
5)
 
Press the  button.
 fThe...

Chapter 4 Settings — [DISPLAY OPTION] menu
96 - ENGLISH
2) Press the  button.
 fThe 

[SCREEN SETTING] screen is displayed.
3)
 
Press 
 qw to switch the [SCREEN FORMAT] item.
 fThe items will switch each time you press the button.
Model No. [SCREEN FORMAT] Range when [SCREEN POSITION] is selected
PT
-
 DZ780 [16:10]
Cannot be adjusted.
[4:3] Adjusts the horizontal position between 
-160 and 160.
[16:9] Adjusts the vertical position between 
-60 and 60.
PT
-

DW750 [16:10]
Cannot be adjusted.
[16:9]...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 97
7) Press the  button.
 fAutomatic adjustment is executed. [PROGRESS] is displayed while in automatic adjustment. When 
completed, the screen returns to the  [AUT

O SETUP] screen.
Note
 f Automatic setup of signal can be executed when analog RGB signals consisting of dots such as computer signals or DVI - D/HDMI signals 
are being input.
Adjusting position automatically
1) Press  as to select [AUTO SETUP].
2)  
Press the  button.
 fThe 

[AUTO...

Chapter 4 Settings — [DISPLAY OPTION] menu
98 - ENGLISH
6) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ENABLE] Switches to the secondary input automatically when the input signal for primary input is disrupted.
[DISABLE] Disables the automatic input switching function.
Note
 fBackup function is enabled only when the [BACKUP  INPUT MODE] is [ON] and the same signal is input to the  terminal and 
 terminal.
 f T

o switch to the backup input signal using the backup...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 99
3) Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4)  
Press 
 qw to switch the item.
[LOW] Sets the slice level to [LOW].
[HIGH] Sets the slice level to [HIGH].
Setting [RGB2 EDID MODE]
1) Press as to select [RGB IN].
2)  
Press the  button.
 fThe 

[RGB IN] screen is displayed.
3)
 
Press 
 as to select [RGB2 EDID MODE].
4)
 
Press the  button.
 fThe 

[RGB2 EDID MODE] screen is displayed.
5)
 
Press 
 qw to switch [EDID...

Chapter 4 Settings — [DISPLAY OPTION] menu
100 - ENGLISH
3) Press as to select [EDID SELECT].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[EDID3] Recognizes movie-based video signals and still image signals automatical\
ly.
[EDID1] Select this item mainly when an external device that outputs movie-based video signals (such as a 
Blu-ray disc player) is connected to the  terminal.
[EDID2:PC] Select this item mainly when an external device that outputs still...