Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 131
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the signal of the address number (A1, A2, ...L7, L8) is 
registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   133).
Registering new signals
After a new signal is input and the  button on the...

Chapter 4 Settings — [SIGNAL LIST] menu
132 - ENGLISH
Note
 fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 fThe 

[REGISTERED SIGNAL STATUS] screen is displayed.
3)
 
Press the  button.
 fThe 

[REGISTERED SIGNAL SETUP] screen is displayed.
4)
 
Press 
 as to select [LOCK].
5)
 
Press 
 qw to switch the item.
 fThe items will switch...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 133
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is 
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white 
balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted 
for each signal,...

Chapter 4 Settings — [SECURITY] menu
134 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 f When you select the [SECURITY] menu and press the  button, entering a...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 135
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING].
1)  
Press...

Chapter 4 Settings — [SECURITY] menu
136 - ENGLISH
4) Press the  button.
5)  
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT

 SELECT BUTTON] is selected, press the  button, and then press as to select 
the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power standby  button, power on  button
[INPUT SELECT BUTTON]  button,  button,  
button,  button,...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 137
2) Press the  button.
 fThe 

[CONTROL DEVICE PASSWORD CHANGE]  screen is displayed.
3)
 
Press 
 asqw to select the text, and press the  button to enter the text.
4)
 
Press 
 asqw to select [OK], and press the  button.
 fT

o cancel, select [CANCEL].
Attention
 f The initial password is “AAAA” by the factory default or when [ALL  USER DA TA] in [INITIALIZE] (x   page   126) is executed. fChange the password periodically that is hard to guess.   

Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   71) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the  terminal of the projector.
1)
 
Press 
 as to select [DIGITAL LINK MODE].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 139
5) Press as to select [STORE].
6)  
Press the  button.
7)

 
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f The projector does not support 10BaseT  Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2)  
Press the  button.
 fThe 

[DIGITAL LINK SETUP] screen is displayed.
3)
 
Press 
 as to select [DUPLEX(DIGITAL LINK)].
4)...

Chapter 4 Settings — [NETWORK] menu
140 - ENGLISH
[DHCP][ON]
If a DHCP server exists in the network where the projector is to be 
connected, obtains the IP address automatically.
[OFF] If a DHCP server does not exist in the network where the projector 
is to be connected, set [IP ADDRESS], [SUBNET MASK], and 
[DEFAULT GATEWAY].
[IP ADDRESS] Enter the IP address when you do not use a DHCP server.
[SUBNET MASK] Enter the subnet mask when you do not use a DHCP server.
[DEFAULT GATEWAY] Enter the default...