Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 61
Note
 fWhen the projector is switched on for the first time after purchase, as well as when [ALL  USER DA TA] is executed from the [PROJECTOR 
SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is 
displayed. Refer to “When the initial setting screen is displayed” ( x
  page   57) for details.
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power...

Chapter 3 Basic Operations — Projecting
62 - ENGLISH
Projecting
Check the projection lens attachment (x   page   47), external device connection (x   page   49), power cord 
connection ( x
  page   55), switch on the power ( x
  page   56) to start projecting. Select the video for projection, 
and adjust appearance of the projected image.
Selecting the input signal
Select an input signal.
1)
 
Press the input selection ( and , or , , , , 
, ) button on the remote control or the control panel.
(SDI input...

Chapter 3 Basic Operations — Projecting
ENGLISH - 63
 fWhen the main power is switched of f during shift adjustment, a lens calibration error screen will be displayed during the next shift 
adjustment. Execute the [PROJECTOR SETUP] menu → [LENS CALIBRATION].
 f When the lens calibration error is displayed even though [LENS CALIBRA TION] was executed, ask your dealer to repair the unit.
Adjusting the lens position and focus when the fixed-focus lens (Model No.: 
ET
-

DLE030) is used
After attaching the...

Chapter 3 Basic Operations — Projecting
64 - ENGLISH
Note
 fComplete the operation within approximately 5 seconds after the  [HOME POSITION] screen is displayed.  The [HOME POSITION] screen 
will disappear after time limit.
 f The home position of the lens is the lens position when the lens is bein\
g replaced or when the projector is being stored, and it is not the 
optical center of the screen.
 fY

ou can also display the  [HOME POSITION] screen by pressing the  button on the control panel or the...

Chapter 3 Basic Operations — Projecting
ENGLISH - 65
 fWhen the optional fixed-focus lens (Model No.: ET- DLE030) is attached, it can be used with the shift adjustment based on the projected 
image position in the standard lens position within the range that the e\
dge of the projected image is not blocked by the projector body .   

Chapter 3 Basic Operations — Operating with the remote control
66 - ENGLISH
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible 
to turn off the image temporarily.
 button
1) Press the  button.
 fThe image disappears.
 fThis operation can be also performed using the  button on the control panel.
2)

 
Press the  button again.
 fThe image is displayed.
Note
 f The power indicator...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 67
Switching the input
The input for projection can be switched.
 button
1) Press the input selection (, , , , , ) button.
 fThis operation can be also performed using the buttons on the control pa\
nel.
 Switches the input to RGB1 or RGB2. Switches to the other input when one input has already been 
chosen.
 Switches the input to DIGITAL LINK.
 Switches the input to DVI
- D.

*1Switches the input to RGB1.

*2Switches the input to...

Chapter 3 Basic Operations — Operating with the remote control
68 - ENGLISH
Using the Automatic setup function
The automatic setup function can be used to automatically adjust the res\
olution, clock phase, and image 
position when analog RGB signals consisting of bitmap images such as computer signals are being input, or 
to automatically adjust the image position when DVI- D/HDMI signals are input.  Supplying images with bright 
white borders at the edges and high-contrast black and white characters \...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 69
Setting the remote control ID numbers
When you use the multiple projectors together, you can operate all the projectors simultaneously or each projector 
individually using single remote control, if a unique ID number is assigned to each projector.
After setting the ID number of the projector, set same ID number on the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector ,...

70 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.