Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions
Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
61
POSITION
SHIFT
SIZE DEFAULT
BLANKING
CLOCK PHASE 0
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER: SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
INPUT RESOLUTION
TOTAL DOTS 1056
DISPLAY DOTS 832
TOTAL LINES 666
DISPLAY LINES 624
:MENU SELECT
:ADJUSTPress the “ENTER” button.
The INPUT RESOLUTION...
Page 62
62
Adjusting the position
POSITION
SHIFT
SIZE DEFAULT
BLANKING
CLOCK PHASE 0
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
CLAMP POSITION
POSITION 1
:MENU SELECT
:ADJUST
The optimal value for the clamp position adjustment
• If dark areas are crushed: The...
Page 63
63
POSITION
SHIFT
SIZE VID AUTO
BLANKING
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
KEYSTONE
KEYSTONE 63
LINEARITY 63
:ADJUST
Keystone distortion correction
Keystone distortion can be corrected only along either horizontal bound of the picture.
Procedure of adjustment
Note
Press the “MENU”...
Page 64
64
POSITION
SHIFT
SIZE VID AUTO
BLANKING
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
EDGE BLENDING
UPPER OFF 128
LOWER OFF 128
LEFT OFF 128
RIGHT OFF 128
MARKER OFF
BRIGHT
:MENU SELECT
:ADJUST ENTER:CHANGE
Press the “ENTER” button.
The EDGE BLENDING screen will be...
Page 65
65
Changing the display language
• The on-screen display of the projector is set
to the English language on shipping.Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “LANGUAGE” with the
buttons.
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
:SELECT
ENTER:SET
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
BRIGHT ADJUST...
Page 66
66 How to change the system format Pressing the SYSTEM SELECTOR button on the remote control or the control panel of the main unit allows the user to make the following changes depending on the currently selected input module. The name of the selected system such as RGB, YP BPRand AUTO is displayed on the top left of the screen and disappears automatically. RGB signal input module : RGB RGB REALITY YPBPR Video signal input module...
Page 67
67
How to change the signal for the ET-MD95VM2 (optional)
When ET-MD95VM2 (optional) is installed with the projector, select the signaling system according to the
connected device.
Procedure of setting
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The VIDEO...
Page 68
68 How to use RGB REALITY mode RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high- quality playback by motion-image-specific picture conversion process. This mode is effective only when the signal input is applied to the RGB input signal module (ET-MD95RGB). The appropriate mode can be selected according to the signal. (Refer to page 66) RGB mode: For RGB signals input from a PC etc. (mostly still images) RGB REALITY mode: For RGB signals input from...
Page 69
69
OPTION
ID 2
SETTING FRONT-F
LAMP1 RUNTIME 57h
LAMP2 RUNTIME 60h
LAMP SELECT DUAL
LAMP POWER HIGH
LAMP COOLING TIME SHORT
RS232C SETTING
RGB2 SELECT RGB1 OUT
OSD POSITION 1
:MENU SELECT
:CHANGE
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “ID” with buttons and
change the value...
Page 70
70 A: Floor mount front projection (Front – Floor mount) D: Ceiling mount rear projection (Rear – Ceiling mount) C: Floor mount rear projection (Rear – Floor mount)B: Ceiling mount front projection (Front – Ceiling mount) Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel on the main unit. Procedure of setting OPTION ID 2 SETTING FRONT-F LAMP1 RUNTIME 57h LAMP2 RUNTIME 60h LAMP SELECT DUAL LAMP POWER HIGH LAMP COOLING TIME...