Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

41
If the focusing, zooming or positioning of the image projected on the screen is not successful, even though the
projector is properly positioned against the screen, you can adjust the focus, the zoom, or the vertical or horizontal
position of the image.
Press the LENS button on the remote
control or on the control panel of the
main unit.
Pressing the button changes the setup screen in
the order of 
“LENS FOCUS”, “LENS ZOOM” and
“LENS SHIFT”.
Choose an item and adjust it using
buttons.
How to adjust...

42
Automatic adjustment (AUTO SETUP)
Automatic adjustment function adjust the resolution, clock phase and image position automatically when dots-
structured analog RGB signals such as computer signal are supplied. (Automatic adjustment is not available if
signals or moving images other than analog RGB signals are supplied.)
It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc.
that are clear in white and black contrast when the system is in...

43
Registration of input signal data
The input signal data must be registered because it is not registered on shipment of the projector.
• Up to 96 input signals can be registered.
• Registration is performed by supplying the signal that corresponds to the mounted input module.
Note
Registration of new data
When a new signal is supplied, press the MENU button on the remote control or operating section of the main unit,
and a “NEW SIGNAL INPUTS” screen appears.
Press the “MENU” button.
The “NEW SIGNAL...

44
Registration of input signal data
If new registration is not available because of full memory:
If the number of already registered signals is 96, or the memory is full when you entered a new signal, then press the
MENU button of the remote control or the operating section of the main unit, and a “Confirm overwriting registration”
screen appears.  This means to erase registered signal and to register a new signal by overwriting. In this case,
erase the registered signal and register a new signal by...

45 Sub memory
The projector is provided with a sub memory function to register plural pieces of image adjustment data even they
are determined to be the same signal by the frequency and form of the synchronization signal source.
Use this function when the user needs adjustment of picture quality such as aspect switching and white balance
using the same signal source.
Sub-memory contains all data that can be adjusted by signals such as screen aspect ratio and image adjustment
data (BRIGHT, CONTRAST...

46
Registration of input signal data
On-screen indications
Input switching / signal switching
This shows the registered signal name on the status screen for signal switching.
The designation can be set by the sub memory items.
The place in which address code
(A1, A2, ..., H7 and H8) signals are
registered 
displays the sub
memory number.
Details of registered signal
Restrictions
The maximum sub memory items that can be registered for the projector are 96 including the basic signal.
Note
RESISTERED SIGNAL...

47
Pressing the “FREEZE” button of the remote control switches between a still image and a motion image.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode
is available that allows the user to hide images temporarily.
Press the SHUTTER button of the remote control or the main unit.
The image is turned off.
Press the SHUTTER button again. 
The image comes back.
A portion of the picture on the screen can be zoomed in on with “– D.ZOOM +”...

48
Structure of menu screens
Menus are extensively used for configuring, adjusting or reconfiguring the projector.
The menus structure is as follows:
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
     :MENU SELECT
ENTER:SUB MENU
PICTURE
  PICTURE MODE STANDARD
   COLOR 50
   TINT 30
   COLOR TEMP. STANDARD
   GAMMA STANDARD
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  AI CONTROL OFF
     :MENU SELECT...

49
Basic operations on menu
screen
Press the “MENU” button.
The MAIN MENU appears on the screen.
Select the desired item with the  or
button.
Selected items are displayed in blue.
Press the “ENTER” button to establish
your selection.
The submenu for the selected option will now
open. (Example: PICTURE Menu)
Highlight the desired adjustment item
with the  or  button, then change
or adjust the parameter value with the
or buttons.
For the items such as “COLOR”,“TINT”, “CONTRAST”
and “BRIGHT”, an individual...

Adjusting the picture
50Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this
projector is used.
PICTURE
  PICTURE MODE STANDARD
   COLOUR 50
   TINT 30
   COLOUR TEMP. STANDARD
   GAMMA STANDARD
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  AI CONTROL OFF
     :MENU SELECT    
     :CHANGE
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN...