Home > Panasonic > Projector > Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

Here you can view all the pages of manual Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 51

51
The desired picture can be obtained by following the procedure below.
Adjusting Contrast / Bright / Color / Tint
Adjustment procedure – to adjust picture (color intensity)
PICTURE
  PICTURE MODE STANDARD
   COLOR 50
   TINT 30
   COLOR TEMP. STANDARD
   GAMMA STANDARD
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  AI CONTROL OFF
     :MENU SELECT    
     :ADJUST
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE” with the 
buttons.
MAIN MENU...

Page 52

52
Adjusting the picture
PICTURE
  PICTURE MODE STANDARD
   COLOR 50
   TINT 30
   COLOR TEMP. STANDARD
   GAMMA STANDARD
  CONTRAST 32
  BRIGHT 32
  SHARPNESS 6
  NOISE REDUCTION 2
  AI CONTROL OFF
     :MENU SELECT    
     :CHANGE
Press the “MENU” button.
The MAIN MENU screen will be displayed 
Select “PICTURE” with the 
buttons.
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
Press the “ENTER” button.
The PICTURE...

Page 53

53 Adjusting color matching
When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among
the sets.
Procedure of adjustment
PICTURE
  PULLDOWN MODE AUTO
  COLOR MATCHING USER
     
:MENU SELECT         :CHANGE    
ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE” with the 
buttons.
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED...

Page 54

Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE” with the 
buttons.
Press the “ENTER” button.
The PICTURE screen will be displayed.
Select desired one of the items in the
following table with the  buttons.
Switch the setting with the 
buttons.
Refer to the following table for the items and the
details.
Sharpness / Gamma / Noise reduction / Pulldown mode
Procedure of adjustment
Note
• When  and  buttons are displayed
above or under the items in the
“PICTURE” or “OPTION”...

Page 55

55
PICTURE
  FORMAT SMPTE
  PULLDOWN MODE AUTO
  COLOR MATCHING USER
     
:MENU SELECT         :CHANGE
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
     :MENU SELECT    
ENTER:SUB MENU
To input BETACAM with YCbCr480i
When receiving a picture of 480i with analog component signal YCbCr input, the input level of Cb and Cr can be
switched.
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE”...

Page 56

56
Desired position can be achieved by following the procedure below.
Shift adjustment
This function allows the user to adjust the picture position vertically or horizontally if the position of the image
projected on the screen is displaced when the projector is properly positioned against the screen.
Procedure of adjustment
POSITION
  SHIFT
  SIZE VID AUTO
  BLANKING
  KEYSTONE
  EDGE BLENDING
     :MENU SELECT    
ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed
Select the...

Page 57

57
POSITION
  SHIFT
  SIZE VID AUTO
  BLANKING
  KEYSTONE
  EDGE BLENDING
     :MENU SELECT    
     :CHANGE    ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the 
buttons.
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
     :MENU SELECT    
ENTER:SUB MENU
ZOOM
  INTERLOCK: OFF
  V:   100 %
  H:   100 %
  HV:   100 %
     :MENU    
     :CHANGEPress the “ENTER”...

Page 58

58
Adjusting the position
Some size modes are not available for certain types of input signals.
• For RGB1 and RGB2 input signals: VID AUTO, S1 AUTO or VID AUTO (PRIORITY) cannot be
selected.
• For VIDEO input signals: DEFAULT, S1 AUTO or VID AUTO (PRIORITY) cannot be selected.
• For an NTSC signal with VIDEO or S-VIDEO input: DEFAULT cannot be selected.Note
Size modes
•DEFAULT:Pictures are displayed without changing the aspect ratio of the input signals.
• THROUGH:Pictures are displayed without changing...

Page 59

59
POSITION
  SHIFT
  SIZE VID AUTO
  BLANKING
  KEYSTONE
  EDGE BLENDING
     :MENU SELECT    
ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the 
buttons.
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
     :MENU SELECT    
ENTER:SUB MENU
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “BLANKING” with the 
buttons.
BLANKING
  UPPER 0...

Page 60

60
Adjusting the position
POSITION
  SHIFT
  SIZE DEFAULT
  BLANKING
  CLOCK PHASE 0
  INPUT RESOLUTION
  CLAMP POSITION
  KEYSTONE
  EDGE BLENDING
     :MENU SELECT    
     :ADJUST
Press the “MENU” button.
The MAIN MENU screen will be displayed
Select the “POSITION” with the 
buttons.
MAIN MENU
         PICTURE
         POSITION
         LANGUAGE
         OPTION
         TEST PATTERN
         RESISTERED SIGNAL LIST
     :MENU SELECT    
ENTER:SUB MENU
Press the “ENTER” button.
The POSITION screen will...

Start reading Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

Related Manuals for Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

All Panasonic manuals