Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions

DLPTMBased Projector  Commercial Use
Operating Instructions
Read these instructions completely before operating this unit.
TQBJ 0113-1
POWERON OFFRGB1RGB2AUX
MENU
STD
LENSOSD1
4
72
5
83
6
9
0
NEXTUSERLIGHTID ALLASPECTID SETProjectorComputerNumetric
BRIGHTCONTRAST ON SCREENSYSTEMSELFUNC1D.ZOOM
ENTERPA G E  UP
PA G E  DOWN
VIDEOSHUTS-VIDEOFREEZESHUTTER
AUTO
SETUP
LASER ON/OFF
Model No. PT-D7500U
PT-D7600U 

2
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require. We hope it will help
you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLPTM
based projector.
The serial number of your product may be found on its back. You should note it in the space provided below and
retain this booklet in case service is required.
Model number: PT-D7500U / PT-D7600U
Serial number:
IMPORTANT SAFETY...

3
CAUTION: This equipment is equipped with a three-pin
grounding-type power plug. Do not remove the
grounding pin on the power plug. This plug will
only fit a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug
into the outlet, contact an electrician. Do not
defeat the purpose of the grounding plug.
Do not remove
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These...

4
IMPORTANT SAFETY NOTICE ..........................2
Precautions with regard to safety ....................5
Caution ................................................................6
Accessories ........................................................7
Precautions on handling ..................................8
Examples of system expansion ........................9
Name and function of parts ............................10
Remote control ................................................................10...

5
Precautions with regard to safety
WARNING
If a problem occurs (such as no image) or if you notice smoke or a strange smell coming
from the projector, turn off the power and disconnect the power cord from the wall outlet.
• Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.
• Check that no more smoke is coming out, and then contact an Authorized  Service Center for repairs.
• Do not attempt to repair the projector yourself, as this can be dangerous.
Do...

6
Precautions with regard to safety
Do not place liquid containers on top of the projector.
• If water spills onto the projector or gets inside it, fire or electric shocks could result.
• If any water gets inside the projector, contact an Authorized Service Center. 
Do not insert any foreign objects into the projector.
• Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing
so can result in fire or electric shocks.
After removing the battery...

7
Accessories
Check that all of the accessories shown below have been included with your projector.
Remote control unit
POWERON OFF
RGB1RGB2AUX
MENU
STD
LENSOSD1
4
72
5
83
6
9
0
NEXTUSERLIGHTID ALLASPECTID SETProjectorComputerNumetric
BRIGHTCONTRAST ON SCREEN
SYSTEMSELFUNC1D.ZOOM
ENTER
PAGE UP
PAGE DOWN
VIDEOSHUTS-VIDEOFREEZE
SHUTTER
AUTO
SETUP
LASER ON/OFF
Power cord
[K2CF3EH00001 x 1]wired cable for remote control
[15m (493),
K1EA03NA0001 x 1]
Battery for remote control unit 
[R03NPA/2ST x 1]
Do not...

8
Precautions on handling
Precautions on transport
The projection lens is susceptible to vibrations and
impacts. Care should be taken to protect the lens from
vibrations and impacts when transporting.
Precautions on installation
Be sure to observe the following precautions when
installing the product.
Avoid installing the product in a place
exposed to vibrations or impacts
.
If the projector is installed in a place where
vibrations are transmitted from a source of
driving power and others or mounted in a...

9
The projector is provided with a number of terminals and optional accessories to enable various system expansions.
Both input and output are provided to all terminals on the main unit.
The following are some examples of system expansion:
Examples of system expansion
System 1
Stacking two projectors with the
stacking brackets can double the
picture brightness.
System 3
PC equipped with a DVI-D input module (an
optional item) can be attached to the
projector for computer image viewing
(Realization of...

10
Name and function of parts 
< When the operation mode selector  is
set to Projector >
Remote control operation indicator lamp
The lamp flashes when any remote control button
is pressed.
POWER ON button (page 39)
Turns on the power if the MAIN POWER has been
put to the “l” position.
POWER OFF button (page 40)
Turns off the power if the MAIN POWER has been
put to the “l” position.
AUTO SET UP button (page 42)
Pressing this button while projecting an image
automatically corrects the picture positioning...