Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions
Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions
Have a look at the manual Panasonic DLP Based Projector PT-D7500U PT-D7600U Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61
POSITION
SHIFT
SIZE DEFAULT
BLANKING
CLOCK PHASE 0
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER: SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
INPUT RESOLUTION
TOTAL DOTS 1056
DISPLAY DOTS 832
TOTAL LINES 666
DISPLAY LINES 624
:MENU SELECT
:ADJUSTPress the “ENTER” button.
The INPUT RESOLUTION screen will be
displayed.
Select one of the following items with
the buttons and adjust it with the
buttons.
“TOTAL DOTS”, “DISPLAYED DOTS”, “TOTAL
LINES” and “DISPLAYED LINES”
Each item automatically displays a value in response
to the type of the input signal. If vertical stripes
appear on the screen or the image is partly missing,
increase or decrease the displayed value while
observing the screen to achieve the optimal value.
Adjusting the input resolution
Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the
contour.
Procedure of adjustment
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the
buttons.
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “INPUT RESOLUTION” with the
buttons.
• The abovementioned vertical stripes will not appear on the screen when all signals are input.
• The picture may be distorted during the adjusting operation, but this is not a fault.
• The input resolution can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and
the analog RGB input module (optional: ET-MD95RGB).Note
62
Adjusting the position
POSITION
SHIFT
SIZE DEFAULT
BLANKING
CLOCK PHASE 0
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
CLAMP POSITION
POSITION 1
:MENU SELECT
:ADJUST
The optimal value for the clamp position adjustment
• If dark areas are crushed: The optimal value is the point where the dark area is best improved.
• If the dark areas are displayed in green: The optimal value is the point where the green area becomes dark
and clear.
Adjusting the clamp position
Use the clamp position adjustment to achieve the optimal value when dark areas of the image are crushed or
displayed in green.
Procedure of adjustment
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “POSITION” with the
buttons.
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “CLAMP POSITION” with the
buttons.
Press the “ENTER” button.
The CLAMP POSITION screen will be displayed.
Adjust with the buttons.
The value changes from 1 to 255.
Note• The clamp position can be adjusted only when the RGB signal input is applied with RGB1, RGB2 IN,
and the analog RGB input module (optional: ET-MD95RGB).
63
POSITION
SHIFT
SIZE VID AUTO
BLANKING
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
KEYSTONE
KEYSTONE 63
LINEARITY 63
:ADJUST
Keystone distortion correction
Keystone distortion can be corrected only along either horizontal bound of the picture.
Procedure of adjustment
Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the
buttons.
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “KEYSTONE” with the
buttons.
Press the “ENTER” button.
The KEYSTONE screen will be displayed.
Adjust the “KEYSTONE” horizontally
with the buttons.
The value changes from 0 to 127.
Adjust the vertical “LINEARITY” with
the buttons.
The value changes from 0 to 127.
• Adjust the “LINEARITY” after adjusting the “KEYSTONE”.
• The variable range of the “LINEARITY” changes in response to the adjusted value of the
“KEYSTONE”.
• Pressing STD (standard) button of the remote control will restore the factory default (“KEYSTONE”:
63, “LINEARITY”: 63).
• The adjusted value is reflected in other input signals.
• Keystone distortion can be corrected to ±40°of the angle of tilt for the projector against the screen. (If
fixed-focus lens is used, the angle will be within ±27°for PT-D7500U and within ±22°for PT-D7600U.)
64
POSITION
SHIFT
SIZE VID AUTO
BLANKING
KEYSTONE
EDGE BLENDING
:MENU SELECT
ENTER:SUB MENU
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
EDGE BLENDING
UPPER OFF 128
LOWER OFF 128
LEFT OFF 128
RIGHT OFF 128
MARKER OFF
BRIGHT
:MENU SELECT
:ADJUST ENTER:CHANGE
Press the “ENTER” button.
The EDGE BLENDING screen will be displayed.
Specify the area to be adjusted with the
buttons.
To joint the top: set “UPPER” to “ON”.
To joint the bottom: set “LOWER” to “ON”.
To joint the left: set “LEFT” to “ON”.
To joint the right: set “RIGHT” to “ON”.
Press the “ENTER” button to toggle
“ON” and “OFF”.
Adjust the correction width with the
buttons.
Select “MARKER” with the
buttons.
Select “ON” with the ENTER buttons.
The optimal point is where
these lines overlap.
Adjustment marker
When the “MARKER” is set to “ON”, the image position adjustment
marker is displayed.
Green lines are shown on the top and the left of the displayed picture
frame and red lines are displayed on the right and the bottom.
The optimal point is the position where the red line of one frame overlaps
the green line of the other frame.
Notice:
The correction widths of the jointed frames must be the same value all
the time.
The optimal joint cannot be achieved if the jointed frames have
different correction widths.
Edge blending adjustment
This projector has the function to hide the seams for multi-screens.
Procedure of adjustment
Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the
buttons.
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “EDGE BLENDING” with the
buttons.
Adjusting the position
65
Changing the display language
• The on-screen display of the projector is set
to the English language on shipping.Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “LANGUAGE” with the
buttons.
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
:SELECT
ENTER:SET
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
BRIGHT ADJUST
BRIGHT INSIDE 6
BRIGHT OUTSIDE 6
UPPER 0
LOWER 0
RIGHT 0
LEFT 0
:MENU SELECT
:ADJUST
Select the “BRIGHT” with the
buttons.
Press the ENTER button.
The BRIGHT ADJUST screen will be displayed.
Select the “BRIGHT INSIDE” with the
buttons.
Adjust the compensation value (0-255)
with the buttons.
Select the part of Upper, Lower, Right
or Left with buttons.
Adjust the width which do not
compensate with buttons (0-255).
Select the BRIGHT OUTSIDE with the
buttons.
Adjust the compensation value (0-255)
with the buttons.
• BRIGHT adjustment is used to avoid the conspicuous BRIGHT of the part in which picture images are
superimposed on each other when multi-screens are displayed using the edge blending system.
The optimal point will be achieved when correction is made so that BRIGHT will be the same in the
part in which images are superimposed and in the part in which images are not superimposed by
adjusting the BRIGHT inside.
Adjust the widths of the top, bottom, left and right if the image looks brighter only in the vicinity of the
borders between the overlapping and non-overlapping parts after making BRIGHT adjustment.
If the image becomes darker only in the vicinity of the borders after width adjustments, also adjust the
BRIGHT outside.Note
Press the “ENTER” button.
The LANGUAGE screen will be displayed.
Select the desired language with the
buttons.
Press the “ENTER” button to establish
your selection.
Menus, setting items, adjustment screens, and
control button names will be displayed in the
language the user chooses.
The available languages are: English, German
(DEUTSCH), French (FRANÇAIS), Italian
(ITALIANO), Spanish (ESPAÑOL), Japanese
( ) and Chinese ( ).
66
How to change the system format
Pressing the SYSTEM SELECTOR button on the remote control or the control panel of the main unit allows the
user to make the following changes depending on the currently selected input module.
The name of the selected system such as RGB, YP
BPRand AUTO is displayed on the top left of the screen and
disappears automatically.
RGB signal input module : RGB RGB REALITY YPBPR
Video signal input module
: AUTO1 NTSC PAL SECAM
PAL60 NTSC4.43
Serial digital input module
ET-MD95SD1 :
AUTO 480i 576i
ET-MD95SD2
:
AUTO 480p 480i 576i
ET-MD95SD3 :
AUTO 1080/60i 1035/60i 720/60p 1080/24p
1080/24sF 1080/25p 1080/30p 1080/50i YC
bCrRGB RGB REALITY
: AUTO2 NTSC PAL-M
PAL-N
:
AUTO 480i 576i
ET-MD95RGB
ET-MD95VM2
For the setting of
AUTO2
For the setting of
ET-MD95VM2
YCbCr
ET-MD95VM2
For the setting of
AUTO1
S video / Video terminal input signal
AUTO1
NTSC PAL SECAM
PAL60 NTSC4.43
AUTO2 NTSC PAL-M
PAL-NFor the setting of
AUTO1
For the setting of
AUTO2
* For 720P and 1080i input
* For 480i,576i,480P input
The SYSTEM SELECTOR button
is ineffective with other types of
signals.
* When the STD (standard) button is
pressed while changing the system
mode (with the SYSTEM
SELECTOR), the projector
automatically returns to AUTO1,
AUTO2, or AUTO. * For the details on the setting for
AUTO1, AUTO2 or YCbCr, refer to
page 67.
* “AUT* O 1”: Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.
“AUTO 2”: Selection is automatically made out of NTSC, PAL-M and PAL-N.
RGB1/RGB2 terminal input signals
For 720p, 1080i input: RGB YP
BPR
For 480i, 576i, 480p input: RGB YCbCr
For the signals other than those above, SYSTEM SELECTOR button is invalid.
67
How to change the signal for the ET-MD95VM2 (optional)
When ET-MD95VM2 (optional) is installed with the projector, select the signaling system according to the
connected device.
Procedure of setting
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The VIDEO SETTING screen will be displayed.
Choose an input signaling system with
the buttons and switch to “LINE
or Y/C” or “YCbCr” with the
buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
If “LINE or Y/C” is selected, choose a
video system with the buttons
and switch to “AUTO1” or “AUTO2”
with the buttons.
The selected signaling system appears.
(The picture may be distorted during the switching
operation.)
Press the “MENU” button three times.
The on-screen indications disappear and the set
screen appears.
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “VIDEO SETTING” with the
buttons.
• When buttons are displayed above
or under the items in the “PICTURE” or
“OPTION” screen, they indicate that there
are more adjustment (items).Note
OPTION
SYSTEM INFORMATION
VIDEO SETTING
FAN CONTROL NORMAL
P IN P ON
FUNC1 P IN P
CONTRAST MODE OFF
PASSWORD
:MENU SELECT
ENTER:SUB MENU
68 How to use RGB REALITY mode RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high- quality playback by motion-image-specific picture conversion process. This mode is effective only when the signal input is applied to the RGB input signal module (ET-MD95RGB). The appropriate mode can be selected according to the signal. (Refer to page 66) RGB mode: For RGB signals input from a PC etc. (mostly still images) RGB REALITY mode: For RGB signals input from a scan converter etc. (mostly motion images) The following are the signals that can be converted into RGB REALITY mode: Signal name 480i fH(kHz)/fV(Hz)RGB modeRGB REALITY modeRemarks 15.73/60 576i15.63/50 480p31.47/60 720/60p45.00/60 1035/60i33.75/60 1080/60i33.75/60 1080/24p27.00/24 1080/50i28.12/50 1080/30p33.75/30 1080/25p28.12/25 1080/24sF27.00/48 OthersRGB mode only : Supported (Factory default) : Supported (To use the signal in the mode with , select the signal with the SYSTEM SELECTOR button and register it.) : Use the signal in the RGB REALITY mode because the signal may not be supported depending on the state of the signal. : Not supported • The automatic picture adjustment (page 42) and the adjustment of the input resolution (page 61) cannot be performed because the optimal adjustment value is preset in the RGB REALITY mode. • The projectors adjustment functions in the RGB REALITY mode are the same as those for the YP BPR (or YCbCr) input. Note
69
OPTION
ID 2
SETTING FRONT-F
LAMP1 RUNTIME 57h
LAMP2 RUNTIME 60h
LAMP SELECT DUAL
LAMP POWER HIGH
LAMP COOLING TIME SHORT
RS232C SETTING
RGB2 SELECT RGB1 OUT
OSD POSITION 1
:MENU SELECT
:CHANGE
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “ID” with buttons and
change the value with buttons
(ALL, 1, 2, …64).
Press the “MENU” button twice.
This concludes the setting procedure and the on-
screen indications disappear and the normal
screen appears again.
• The ID number can be set to “ALL”, or selected from “1” to “64”.
• If the projectors are given ID numbers, their remote controls must be assigned the same ID numbers,
respectively.
• If the ID number of a projector is set to “ALL”, it can be controlled by the remote control or the PC with
any ID number.
If multiple projectors are used and some of them have their IDs set to “ALL”, they cannot be controlled
separately from the projectors with other ID numbers.
For details on remote control ID setting, see page 16.
Option settings
ID number setting
The projector has an ID number setting function that helps the user to control two or more projectors either
simultaneously or separately with a single remote control. The ID number is set to ALL by default. Hence the
ID number need not be set when only one projector is used.
Procedure of setting
Note
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
70
A: Floor mount front projection (Front – Floor mount)
D: Ceiling mount rear projection (Rear – Ceiling mount) C: Floor mount rear projection (Rear – Floor mount)B: Ceiling mount front projection (Front – Ceiling mount)
Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel on
the main unit.
Procedure of setting
OPTION
ID 2
SETTING FRONT-F
LAMP1 RUNTIME 57h
LAMP2 RUNTIME 60h
LAMP SELECT DUAL
LAMP POWER HIGH
LAMP COOLING TIME SHORT
RS232C SETTING
RGB2 SELECT RGB1 OUT
OSD POSITION 1
:MENU SELECT
:CHANGE
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
Optional settings
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
Press the “ENTER” button.
The OPTION screen will be displayed.
Select “SETTING” with the
buttons and choose a projection
scheme with the buttons.
Each time or button is pressed, the types of
projection scheme, together with its indications, are
toggled through a cycle as follows:
FRONT-F FRONT-C
REAR-C REAR-F
Press the “MENU” button twice.
The on-screen indications disappear and the
normal screen appears again.
Installation Setting
A projection scheme can be chosen depending on the installation of the projector. If the picture is shown upside
down or in reverse, change the projection scheme using the following figures A to D.