Panasonic Digital Imaging System For Facsimile And Internet Fax Email Functions Dp 8032 Operating Instructions

Safety Information
11
Getting to KnowYour Machine
Do not install the machine near heating, or an air conditioning unit.
Avoid exposure to direct sunlight.
Install the machine on a flat surface, leave at least 4 inches (10 cm) of space
between the machine, and other objects.
Do not block the ventilation openings.
Do not place heavy objects, or spill liquids on the machine.
CAUTION 

Safety Information
12
Connecting the Cables
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.  
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with 
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet HubEthernet LAN 
(10Base-T/100Base-TX) 
Cable (Not  included)
Ethernet-Token-Ring 
Bridge
(Optional Order 
No. UE-204006)ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LINK Lamp...

13
memo
Getting to KnowYour Machine
The illustration of the “ADDRESS BOOK” screen and the
“MODE SETTING” screen used with this manual explains on
a screen different from initial setting. 

14
Control Panel
Used to select the
original size manually.
Flashes:
When receiving printing data.
Lights:
While printing.
Lights/Flashes when trouble occurs.
Flashes:
When machine is active.
Lights:
When the received fax message is in memory.
Touch Panel Display
PRINT DATA LED (Green)
STATUS LED (Red)
ACTIVE LED (Green)
Used to select the
FAX/EMAIL mode.ON LINE Indicator
Blinks : When sending, or
            receiving FAX/Email
            communication.
[ Ex:  DP-8032]
Lights:
Machine detected a...

Control Panel
15
Getting to KnowYour Machine
Used to switch the machine 
into energy saving mode.
For more details, see
Energy Saver page of the 
Operating Instructions (For Copier.) Used to start, or 
select the function, 
and sub-functions.
Used to reset
all the previously
set functions.
Use this button when
correcting entered
numbers, or characters.
Press this button when
you want to stop the
communication,
registration operation,
or audible tone.
Press this button to 
start transmission, email...

memo
16 

17
Before Starting
Before Starting
Loading Documents
NOTE1. When an oversized original is sent to another machine, sometimes, it is reduced in accordancewith the other partys recording paper size.
Ex:
How to Load Documents
1. On the ADF / Inverting ADF 2. On the Platen Glass
• Insert the original(s) Face Up into the ADF untilthe leading edge placed into the machine
stops. • Place a book, or an original Face Down on the
Platen Glass, aligning it with the arrow mark on
the original size guides.
Sending...

18
Basic Transmission Settings
You can temporarily change the transmission settings either before, or after you place the document on the
ADF. These settings are as follows:
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to  Lighter. If you wish to send a document with darker contrast, change the setting to  Darker.
General...

Basic Transmission Settings
19
Before Starting
Your machine is preset to Standard resolution, which is suitable for most documents.
Use  Fine , or Super Fine  for detailed documents. 
NOTE1. To change the preset Contrast position, change the setting of Fax Parameter No. 01.
 (See page 190) 
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02.
 (See page 190)
3. If you send a photographic original with gray tones, set the Resolution to Fine, or S-Fine (406 x  391 dpi),...

Basic Transmission Settings
20
The Original setting is useful when sending photographs, or illustrations with gray tones.  Your machine is
preset to TEXT.  You can select either TEXT/PHOTO, or PHOTO mode.
NOTE1. When you select TEXT/PHOTO, or PHOTO, your machine will automatically select Fine Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory.  In this case the Verification Stamp is not a confirmation that 
the...