Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

1
2
3
4
5
6
7
8
9
10
11
12
2-17
Changing the Printing Order
1
Press the  JOB STATUS  key on the control panel,
then the  JOB LIST  key on the touch panel.
2
Select the job you want to move.
3
Press the  MOVE  key, then press the position
where the selected job is to move to.
- The job to be moved will be shifted next to new priority.
- The job with top priority (having been printed or suspended)
cannot be moved.
4
The changing order is completed.
- If you want to return to the basic screen (before
JOB...

1
2
3
4
5
6
7
8
9
10
11
12
2-18HOW TO MAKE COPIES 

1
2
3
4
5
6
7
8
9
10
11
12
3-1
3. SETTING OF BASIC COPY
MODES
1. PAPER SELECTION ................................................................ 3-2
- Automatic Paper Selection (APS).............................................................. 3-2
- Manual Paper Selection............................................................................. 3-3
2. REDUCTION AND ENLARGEMENT COPYING ..................... 3-4
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) ......... 3-7
4. COPY DENSITY ADJUSTMENT...

12
3
4
5
6
78
9
10
11
12
3-2SETTING OF BASIC COPY MODES
4
Press the  START  key.
1. PAPER SELECTION
Automatic Paper Selection (APS)
- If the Automatic Paper Selection mode is not selected, press the  ZOOM···  key, then press the  APS  key on the
next screen.
- If the following messages are shown, proceed as directed:
When you place regular-sized originals on the glass or in the reversing automatic document feeder, the
built-in sensors automatically work to detect the size of the originals, helping the...

12
3
4
5
6
78
9
10
11
12
3-3
3
On the basic screen, press the drawer icon
represent ing the desired paper size.
1
Place paper in the drawer(s).  Page 2-4
- When using this mode in bypass copying, be sure to specify the paper size. 
 Page 5-10, 5-11
Manual Paper Selection
It may not be possible for the device to perform Automatic Paper Selection with highly transparent
originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or
irregular sized originals such as...

12
3
4
5
6
78
9
10
11
12
3-4SETTING OF BASIC COPY MODES
2. REDUCTION AND ENLARGEMENT COPYING
When placing originals on the glass, you can copy them at the reducing and enlarging rate of 25 to 400%.
For the reversing automatic document feeder, you can make the copy at the reducing and enlarging rate
of 25 to 200%.
There are the following three ways of making copies in the reduction and enlargement mode:
Using Automatic Magnification Selection (AMS)
Specifying both original size and copy size
Using the...

12
3
4
5
6
78
9
10
11
12
3-5
4
Press the key corresponding to the original size.
- Using the original size and copy size, the correct reproduction ratio is computed and displayed on the
screen.
- OTHER  key 
 Page 5-14
  Specifying both Original Size and Copy Size
2
Place the original(s).  Page 2-9
3
Press the desired drawer, then the  ZOOM···  key.
- The copy paper size is selectable on the screen in step 4 as
well.
1
Place paper in the drawer(s).  Page 2-4
 Select other copy modes as required.
5
Press...

12
3
4
5
6
78
9
10
11
12
3-6SETTING OF BASIC COPY MODES
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
3
Press the drawer icon representing the desired copy
paper size, then press the  ZOOM····  key.
- The copy paper size is selectable on the screen in step 4 as well.
4
Press the   UP (or   DOWN ) key to set the
desired reproduction ratio.
- Each time you press either key, the reproduction ratio changes by 1%. Holding down the key changes it continu-
ously.
- You can also select the reproduction ratio by...

1
2
3
4
5
6
7
8
9
10
11
12
3-7
-12-
-13-
-15- -12- -13- -15--13-
-13-
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE)
This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type
of copying (1-sided or 2-sided).
Original Copy
*  cannot be used by OHP film. 

12
3
4
5
6
78
9
10
11
12
3-8SETTING OF BASIC COPY MODES
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) (Cont.)
3
Press the key (shaded) on the right basic screen.
- The default setting is 1-Sided Originals to 1-Sided Copies.
Book-Type Originals  2-Sided Copies
1
Follow the same procedure 1 to 3 as shown above.
1
Place paper in the drawer(s).  Page 2-4
- When using the mode of 1-Sided Originals to 2-Sided Copies and 2-Sided Originals to 2-Sided Copies in bypass copying,
be sure to specify the paper size....