Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

12
3
4
5
6
78
9
10
11
12
9
1
Handle and use the machine gently and carefully.
 Do not place anything on the paper drawers or the original feeding tray.
 Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur.
 Do not allow any metal items such as paper clips to fall into the machine.
2
Be sure to turn OFF the power switch (unless using the weekly timer mode):
 When you leave your office at night.
 If a power failure...

12
3
4
5
6
78
9
10
11
12
10
Explanatory Label
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LASER KLASSE 1
PRODUCTO DE LASER DE CLASE 1 >PS<
Certification LabelPRODUCT    IS      CERTIFIED       BY     THE
MANUFACTURER TO COMPLY WITH DHHS
RULE 21 CFR SUBCHAPTER J APPL I CABLE
AT THE DATE OF MANUFACTURE.
MANUFACTURED:
JS
M
Warning Label
High Temperature Warning Areas 

12
3
4
5
6
78
9
10
11
12
11
  Fixing the adjusters (stoppers)
There are four adjusters (stoppers) located in front and rear bottom
(two adjusters each) of the machine. After moving/installing the
machine, be sure to turn the adjusters clockwise to fix them firmly
on the ground. * To unlock the adjusters when moving the machine, turn them counterclockwise.
If the machine is not steady, it may fall over and result in
personal injury.
To lock
To unlock
2. General Precautions (Cont.)
PRECAUTIONS (Cont.) 

1
2
3
4
5
6
7
8
9
10
11
12
1-1
1. BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM
AND THE OPTIONAL EQUIPMENT .......... 1-2
- Main Components...................................................................................... 1-2
- Optional Equipment.................................................................................... 1-3
- Control Panel .............................................................................................1-4
- Touch Panel...

1
2
3
4
5
6
7
8
9
10
11
12
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM  AND THE OPTIONAL EQUIPMENT
Main Components
Original Scales
Control Panel
Drawers
Paper Size IndicatorFeed Side Cover Bypass Guide
Toner BottleFront Cover Exit Cover Power SwitchReversing Automatic Document Feeder
Operating Instructions Po cket
(Back Side)
Transfer Unit
Transfer Unit LeverOriginal Glass
Tandem LCF
(Large Capacity Feeder)
Touch Panel Contrast Adjustment Volume
(Back Side of the Control Panel)
*...

1
2
3
4
5
6
7
8
9
10
11
12
1-3
Optional Equipment
Finisher
2-Bin Finisher (DA-FS810)
2-Bin Saddle-Stitch Finisher (DA-FS815)
Enables the use of sort, group and staple modes, plus the hole punch (available when the optional hole
punch unit is installed) and saddle-stitch model.
Hole punch unit (DA-SP81)
Makes punching holes on copies for binding in notebooks.
External LCF (Large Capacity Feeder) (DA-MA810)
Feeds up to 4000 sheets of LT-sized paper (20 lb Bond) (recommended by Panasonic) continuously....

12
3
4
5
6
78
9
10
11
12
1-4BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM AND THE OPTIONAL EQUIPMENT (Cont.)
Control Panel
Total Counter
Shows the total of copied paper since the set up of the machine.
  HELP  key
When this key is pressed, the appropriate operation procedures are displayed.
  PRINTER/NETWORK   key
Press this key to switch between the printer and the network (optional) functions.
   COPY   key
Press this key to select the copy functions.
JOB STATUS   key
Press this key...

1
2
3
4
5
6
7
8
9
10
11
12
1-5
 FUNCTION CLEAR   key
When this key is pressed, all selected copy modes are cleared to default settings. 
 Page 2-2
* Automatic Function Clear 
 Right bottom of this page
  STOP   key
Use this key to stop an ongoing scan and copy operation. 
 Page 2-15
  START   key
Press this key to start copying.
 INTERRUPT   key
While copying is already in progress, press this key when you want to make copies of different originals.
Pressing the key again will return you to the previous...

12
3
4
5
6
78
9
10
11
12
1-6BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM AND THE OPTIONAL EQUIPMENT (Cont.)
Touch Panel
The following information is shown on the touch panel:
Machine status, operational instructions, cautionary messages, reproduction ratios, total copy quantity,
paper size of a selected drawer and amount of paper in a selected drawer.
When the power is  turned on, and ‘READY’ is displaye d, the following basic screen is shown on the touch
panel.
On the screen,...