Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

12
3
4
5
6
78
9
10
11
12
2-7
8
Press the  JOB STATUS  key on the control panel,
then the  CASSETTE  key on the touch panel.
9
Press the drawer key corresponding to that in which
the paper size has been changed, then press the
key of the paper size newly set.
- Chinese paper sizes (16K, 8K and 16K-R) can be selected on the screen which appears when the  Next  key is pressed
once. Pressing the  Next  key again will display the AB format
paper sizes.
- Press the RETURN key on the touch panel or the JOB...

12
3
4
5
6
78
9
10
11
12
2-8HOW TO MAKE COPIES
2. SETTING COPY PAPER (Cont.)
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses (Cont.)
3
Press the drawer key corresponding to that in which
the paper has been set, then press the key of the
paper type newly set.
- If you want to select the  COVER ,  INSERT  or  TAB PAPER, make sure that paper with the same size as that for the
COVER, INSERT, or TAB PAPER is set in the other drawer
including the optional external LCF (Large Capacity...

1
2
3
4
5
6
7
8
9
10
11
12
2-9
Setting place
Glass
*1
Reversing automatic
document feeder
*2
Types of originals
Sheets
Three-dimensional objects
Books
Plain paper, recycled paper:
13.3 - 33.8 lb (1-Sided Original)
13.3 - 27.7 lb
 (2-Sided Original)
Maximum size
Width: 11.6”
Length: 17”
Width: 11.6”
Length: 17”Sizes capable of
automatic detection
(Standard size)
LD, LG, LT, LT-R, ST-R
NOTE: LD: Ledger, LG:
Legal, LT: Letter, LT-R:
Letter-R, ST-R: Invoice-R
(Standard size)
LT format:
LD, LG, LT, LT-R,...

1
2
3
4
5
6
7
8
9
10
11
12
2-10HOW TO MAKE COPIES
3. SETTING ORIGINALS (Cont.)
1
Raising the reversing automatic document feeder,
place the original in the direction as shown in the
illustration.
- When using the Book-Type Originals 2-sided Copies (
Page 3-8) or the Dual-Page ( Page 4-5) function, center
the book original on the yellow indicator line.
When Placing an Original on the Glass
Blank sheet
Original
Original
Sheet Originals
1
Raising the reversing automatic document feeder,
place the original...

1
2
3
4
5
6
7
8
9
10
11
12
2-11
When Using the Reversing Automatic Document Feeder
Originals in progress automatically exit on  or  depending
upon the size of originals.
..... LT (Letter), ST-R (Invoice-R)
..... LD (Ledger), LG (Legal), LT-R (Letter-R)
When the papers exit on , pull up the stopper to prevent
originals from falling.
Exiting Originals
Stopper
Precautions for Using the Reversing Automatic Document Feeder
Also, the following originals should be handled carefully:
(1) Folded or curled...

1
2
3
4
5
6
7
8
9
10
11
12
2-12HOW TO MAKE COPIES
When the number of originals is too large to be set at one
time, you can divide the originals into two to ten sets and
set them one after another. To do so, place the first set of
originals first, and press the  CONTINUE  key while the
scanning is in progress. After they have been scanned,
place the previous set of originals.
When Using the Reversing Automatic Document Feeder (Cont.)
 In the Single-Feed Mode  Page 5-3
2
Insert the original face up and...

1
2
3
4
5
6
7
8
9
10
11
12
2-13
4. AUTO JOB START (JOB PRESET)
While multi-copying is in process, you can reserve the next copy.
1
Place the original(s). Page 2-9
2
Press the  START   key.
- Up to 5 jobs including the current printing job can be
stored in the memory. Place the originals of the 6th job on
the original glass or the reversing automatic document
feeder and press the  
START   key. The following
message will appear:
 Select copy modes as required.
Auto Start
 Confirming and Cancelling Auto...

12
3
4
5
6
78
9
10
11
12
2-14HOW TO MAKE COPIES
5. INTERRUPT COPYING
4
After you have finished interrupt copying, press the
INTERRUPT  key again.
- The following message appears:
Select other copy modes as required.
3
Press the  START  key.
While multicopying is in progress, you can interrupt it and make copies from different originals.
* The following modes cannot be used with interrupt copying.
- Cover sheet copying - Sheet insertion copying - Document storage - Overlay
2
Replace the original with a...

12
3
4
5
6
78
9
10
11
12
2-15
1
Press the  STOP  key on the operational panel
during the multicopying operation.
If you want to stop the operation during scanning or multicopying, use the   STOP  key.
 Stopping the Scanning of the Original
1
Press the control panel   STOP   key on the opera tional
panel during the scanning.
2
If the screen on the right appears, press the
MEMORY CLEAR  key.
Or press the  START  key if you want to restart the
copy operation.
 Stopping a Multicopying Operation
6. STOPPING...

1
2
3
4
5
6
7
8
9
10
11
12
2-16HOW TO MAKE COPIES
If data is waiting to be printed, you can delete them, or change the printing order.
7. DELETING OR CHANGING ORDER OF PENDING JOBS
Deleting the Job
In the following procedure, you can delete the multicopying operation as well.
1
Press the  JOB STATUS  key on the control panel,
then the  JOB LIST  key on the touch panel.
2
Select the job you want to delete, then press the
DELETE  key.
3
Press the  Delete  key.
4
The job will be deleted.
Press the  JOB...