Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Step 5
After checking the size of the data to be copied and
the remaining capacity, press the [SET] button after
moving the cursor onto the [Copy] button.
→ The copy data list window will close. Copying will
start and the [COPY] icon will be displayed on the
task bar on monitor 2. When copying is complete,
the [COPY] icon will disappear.
Important:
• Do not remove the SDHC/SD memory card during copying data onto the SDHC/SD memory card. It
may damage data on the SDHC/SD memory card.
•...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-60.png "Page 61
61
Step 5
After checking the size of the data to be copied and
the remaining capacity, press the [SET] button after
moving the cursor onto the [Copy] button.
→ The copy data list window will close. Copying will
start and the [COPY] icon will be displayed on the
task bar on monitor 2. When copying is complete,
the [COPY] icon will disappear.
Important:
• Do not remove the SDHC/SD memory card during copying data onto the SDHC/SD memory card. It
may damage data on the SDHC/SD memory card.
•...")
61 Step 5 After checking the size of the data to be copied and the remaining capacity, press the [SET] button after moving the cursor onto the [Copy] button. → The copy data list window will close. Copying will start and the [COPY] icon will be displayed on the task bar on monitor 2. When copying is complete, the [COPY] icon will disappear. Important: • Do not remove the SDHC/SD memory card during copying data onto the SDHC/SD memory card. It may damage data on the SDHC/SD memory card. •...
Page 62
62 Operation and configuration when connecting the recorders in cascading connection When connecting the recorders (up to 5 recorders) in cascading connection, all images managed by the con- nected recorders can be monitored on a single monitor. The following are descriptions of how to operate when the recorders are connected in cascading connection. To operate the recorders connected in cascading connection, it is necessary to configure the settings in advance. Refer to the Installation Guide for...
Page 63
![Page 63
63
Example of video output (analog) connection
Operation using the buttons on the front panel
It is possible to operate using the buttons on the front panel. When selecting monitor 2, images will be dis-
played on monitor 2 connected to the first WJ-HD616K. When selecting mon\
itor 1, images will be displayed on
monitor 1 connected to the WJ-HD616K currently being operated.
Only the WJ-HD616K currently being operated is subject to operation. It is impossible to operat\
e the other
WJ-HD616K using...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-62.png "Page 63
63
Example of video output (analog) connection
Operation using the buttons on the front panel
It is possible to operate using the buttons on the front panel. When selecting monitor 2, images will be dis-
played on monitor 2 connected to the first WJ-HD616K. When selecting mon\
itor 1, images will be displayed on
monitor 1 connected to the WJ-HD616K currently being operated.
Only the WJ-HD616K currently being operated is subject to operation. It is impossible to operat\
e the other
WJ-HD616K using...")
63
Example of video output (analog) connection
Operation using the buttons on the front panel
It is possible to operate using the buttons on the front panel. When selecting monitor 2, images will be dis-
played on monitor 2 connected to the first WJ-HD616K. When selecting mon\
itor 1, images will be displayed on
monitor 1 connected to the WJ-HD616K currently being operated.
Only the WJ-HD616K currently being operated is subject to operation. It is impossible to operat\
e the other
WJ-HD616K using...
Page 64
![Page 64
64
Operate the camera
Step 1
Press the [SUB MENU] button on the front panel.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto "Camera operation" on the displayed menu
list, and then press the [SET] button.
→ The [Pan/Tilt] tab of the camera control panel will
be displayed.
It is possible to operate the following camera...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-63.png "Page 64
64
Operate the camera
Step 1
Press the [SUB MENU] button on the front panel.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto \"Camera operation\" on the displayed menu
list, and then press the [SET] button.
→ The [Pan/Tilt] tab of the camera control panel will
be displayed.
It is possible to operate the following camera...")
64
Operate the camera
Step 1
Press the [SUB MENU] button on the front panel.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto "Camera operation" on the displayed menu
list, and then press the [SET] button.
→ The [Pan/Tilt] tab of the camera control panel will
be displayed.
It is possible to operate the following camera...
Page 65
![Page 65
65
Step 1
Display the camera control panel. (☞ Page 64)
Step 2
Adjust the horizontal/vertical position of images from
the camera using the arrows button (C, D, A, B).
The camera direction will move to the direction com-
manded by the arrows button.
Note:
• It is possible to make the panning/tilting speed slower by adjusting the camera direction when the
[HOLD] button is being lit (by pressing the [HOLD]
button).
• To release the hold, press the [HOLD] button again....](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-64.png "Page 65
65
Step 1
Display the camera control panel. (☞ Page 64)
Step 2
Adjust the horizontal/vertical position of images from
the camera using the arrows button (C, D, A, B).
The camera direction will move to the direction com-
manded by the arrows button.
Note:
• It is possible to make the panning/tilting speed slower by adjusting the camera direction when the
[HOLD] button is being lit (by pressing the [HOLD]
button).
• To release the hold, press the [HOLD] button again....")
65
Step 1
Display the camera control panel. (☞ Page 64)
Step 2
Adjust the horizontal/vertical position of images from
the camera using the arrows button (C, D, A, B).
The camera direction will move to the direction com-
manded by the arrows button.
Note:
• It is possible to make the panning/tilting speed slower by adjusting the camera direction when the
[HOLD] button is being lit (by pressing the [HOLD]
button).
• To release the hold, press the [HOLD] button again....
Page 66
![Page 66
66
Step 1
Display the camera control panel (☞ page 64), and
then press the camera selection button [2] on the
front panel.
→ The [Focus] tab will be displayed.
Step 2
Press the arrows button (A B). When pressing A,
the focal point will move to the near side. When
pressing A, the focal point will move to the far side. It
is possible to automatically adjust the focus by press-
ing the [SET] button on the front panel.
Focus adjustment
Adjust the focus of the camera. The auto focus...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-65.png "Page 66
66
Step 1
Display the camera control panel (☞ page 64), and
then press the camera selection button [2] on the
front panel.
→ The [Focus] tab will be displayed.
Step 2
Press the arrows button (A B). When pressing A,
the focal point will move to the near side. When
pressing A, the focal point will move to the far side. It
is possible to automatically adjust the focus by press-
ing the [SET] button on the front panel.
Focus adjustment
Adjust the focus of the camera. The auto focus...")
66
Step 1
Display the camera control panel (☞ page 64), and
then press the camera selection button [2] on the
front panel.
→ The [Focus] tab will be displayed.
Step 2
Press the arrows button (A B). When pressing A,
the focal point will move to the near side. When
pressing A, the focal point will move to the far side. It
is possible to automatically adjust the focus by press-
ing the [SET] button on the front panel.
Focus adjustment
Adjust the focus of the camera. The auto focus...
Page 67
![Page 67
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The "Preset/Auto" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-66.png "Page 67
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The \"Preset/Auto\" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and...")
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The "Preset/Auto" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and...
Page 68
![Page 68
68
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Enter the preset position number to move the camera
direction.
The preset position number can be entered in the
same manner as of the preset number registration
(☞ page 67).
When entering number "000", the camera direction
will move to the home position.
Note:
• It is necessary to register the "Home" position by configuring the settings of the camera in advance.
Step 3
Move the cursor onto the [Call]...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-67.png "Page 68
68
Step 1
Display the \"Preset/Auto\" window. (☞ Page 67)
Step 2
Enter the preset position number to move the camera
direction.
The preset position number can be entered in the
same manner as of the preset number registration
(☞ page 67).
When entering number \"000\", the camera direction
will move to the home position.
Note:
• It is necessary to register the \"Home\" position by configuring the settings of the camera in advance.
Step 3
Move the cursor onto the [Call]...")
68 Step 1 Display the "Preset/Auto" window. (☞ Page 67) Step 2 Enter the preset position number to move the camera direction. The preset position number can be entered in the same manner as of the preset number registration (☞ page 67). When entering number "000", the camera direction will move to the home position. Note: • It is necessary to register the "Home" position by configuring the settings of the camera in advance. Step 3 Move the cursor onto the [Call]...
Page 69
![Page 69
69
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Move the cursor onto "Auto mode", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
Auto track, auto pan, preset sequence, sort, patrol 1,
patrol 2, patrol 3, patrol 4
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-68.png "Page 69
69
Step 1
Display the \"Preset/Auto\" window. (☞ Page 67)
Step 2
Move the cursor onto \"Auto mode\", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
Auto track, auto pan, preset sequence, sort, patrol 1,
patrol 2, patrol 3, patrol 4
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→...")
69 Step 1 Display the "Preset/Auto" window. (☞ Page 67) Step 2 Move the cursor onto "Auto mode", and then select the desired auto function by rotating the jog dial (inside). The following 8 auto functions can be selected. Auto track, auto pan, preset sequence, sort, patrol 1, patrol 2, patrol 3, patrol 4 Refer to the operating instructions of the camera for information about each auto function. Step 3 Move the cursor onto the [Start] button, and then press the [SET] button. →...
Page 70
![Page 70
70
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto "Camera menu" on the displayed menu list,
and then press the [SET] button.
→ The camera menu will be displayed and the cam-
era setup menu will be displayed on the monitor.
Note:
• The status bar will be hidden while the camera menu panel is...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-69.png "Page 70
70
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Camera control] button of
the submenu, and then press the [SET] button.
→ The menu list will be displayed. Move the cursor
onto \"Camera menu\" on the displayed menu list,
and then press the [SET] button.
→ The camera menu will be displayed and the cam-
era setup menu will be displayed on the monitor.
Note:
• The status bar will be hidden while the camera menu panel is...")
70 Step 1 Press the [SUB MENU] button. → The submenu window will be displayed. Step 2 Move the cursor onto the [Camera control] button of the submenu, and then press the [SET] button. → The menu list will be displayed. Move the cursor onto "Camera menu" on the displayed menu list, and then press the [SET] button. → The camera menu will be displayed and the cam- era setup menu will be displayed on the monitor. Note: • The status bar will be hidden while the camera menu panel is...