Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Search for time and date when a motion was detected from
recorded images and play (VMD search)
Display a list of time and date when a motion was detected (by the VMD \
function) from images recorded by all
the recording modes (☞ page 37), and then select a desired recorded image to play from the list.
Camera channels, time and date when a motion was detected, detection area and detection sensitivity can be
used as the filters for the VMD search.
VMD search list window
[VMD search] button...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-50.png "Page 51
51
Search for time and date when a motion was detected from
recorded images and play (VMD search)
Display a list of time and date when a motion was detected (by the VMD \
function) from images recorded by all
the recording modes (☞ page 37), and then select a desired recorded image to play from the list.
Camera channels, time and date when a motion was detected, detection area and detection sensitivity can be
used as the filters for the VMD search.
VMD search list window
[VMD search] button...")
51
Search for time and date when a motion was detected from
recorded images and play (VMD search)
Display a list of time and date when a motion was detected (by the VMD \
function) from images recorded by all
the recording modes (☞ page 37), and then select a desired recorded image to play from the list.
Camera channels, time and date when a motion was detected, detection area and detection sensitivity can be
used as the filters for the VMD search.
VMD search list window
[VMD search] button...
Page 52
![Page 52
52
Step 1
Press the [SEARCH] button on the front panel.
→ The recording event list window will be displayed.
Step 2
Move the cursor onto the [VMD] tab, and then press
the [SET] button on the front panel.
→ The "VMD" tab page will be displayed.
Step 3
Designate the search filters.
Move the cursor onto the [VMD search] button, and
then press the [SET] button on the front panel.
→ The search filter window will be displayed.
Step 4
Specify the VMD search conditions.
When the [SET]...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-51.png "Page 52
52
Step 1
Press the [SEARCH] button on the front panel.
→ The recording event list window will be displayed.
Step 2
Move the cursor onto the [VMD] tab, and then press
the [SET] button on the front panel.
→ The \"VMD\" tab page will be displayed.
Step 3
Designate the search filters.
Move the cursor onto the [VMD search] button, and
then press the [SET] button on the front panel.
→ The search filter window will be displayed.
Step 4
Specify the VMD search conditions.
When the [SET]...")
52
Step 1
Press the [SEARCH] button on the front panel.
→ The recording event list window will be displayed.
Step 2
Move the cursor onto the [VMD] tab, and then press
the [SET] button on the front panel.
→ The "VMD" tab page will be displayed.
Step 3
Designate the search filters.
Move the cursor onto the [VMD search] button, and
then press the [SET] button on the front panel.
→ The search filter window will be displayed.
Step 4
Specify the VMD search conditions.
When the [SET]...
Page 53
![Page 53
53
Specify the time range
Move the cursor onto the [Time & date] button, and
then press the [SET] button.
→ The time & date setup menu will be displayed.
Specify the time range by rotating the jog dial (inside).
Move the cursor onto the entry field, and then press
the [SET] button. The software keyboard (for time and
date entry) will be displayed and the time and date
can be entered using it. Refer to pages 21 and 25 for
how to use the software keyboard (for time and date
entry).
Filter by...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-52.png "Page 53
53
Specify the time range
Move the cursor onto the [Time & date] button, and
then press the [SET] button.
→ The time & date setup menu will be displayed.
Specify the time range by rotating the jog dial (inside).
Move the cursor onto the entry field, and then press
the [SET] button. The software keyboard (for time and
date entry) will be displayed and the time and date
can be entered using it. Refer to pages 21 and 25 for
how to use the software keyboard (for time and date
entry).
Filter by...")
53 Specify the time range Move the cursor onto the [Time & date] button, and then press the [SET] button. → The time & date setup menu will be displayed. Specify the time range by rotating the jog dial (inside). Move the cursor onto the entry field, and then press the [SET] button. The software keyboard (for time and date entry) will be displayed and the time and date can be entered using it. Refer to pages 21 and 25 for how to use the software keyboard (for time and date entry). Filter by...
Page 54
![Page 54
54
Note:
• To delete the set detection area, take the following procedures.
1. Move the cursor onto the [Area delete] button on the search filter window, and then press the
[SET] button.
2. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press
the [SET] button.
4. Set the detection sensitivity of each detection area.
Move the cursor onto "Sensitivity" of the detection area to be set, and then rotate the jog dial (inside)
to select...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-53.png "Page 54
54
Note:
• To delete the set detection area, take the following procedures.
1. Move the cursor onto the [Area delete] button on the search filter window, and then press the
[SET] button.
2. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press
the [SET] button.
4. Set the detection sensitivity of each detection area.
Move the cursor onto \"Sensitivity\" of the detection area to be set, and then rotate the jog dial (inside)
to select...")
54
Note:
• To delete the set detection area, take the following procedures.
1. Move the cursor onto the [Area delete] button on the search filter window, and then press the
[SET] button.
2. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press
the [SET] button.
4. Set the detection sensitivity of each detection area.
Move the cursor onto "Sensitivity" of the detection area to be set, and then rotate the jog dial (inside)
to select...
Page 55
![Page 55
55
Step 7
Move the cursor onto the [B] (play) button, and then
press the [SET] button. (Or press the [PLAY] button on
the front panel.)
→ Playback of the selected recorded data (in which
motion was detected) will be displayed.
Note:
• When selected time and date is too close to the current time and date, playback may sometimes
not start. In this case, wait for a while and try to
play again.
Step 8
To stop the playback, press the [STOP] button on the
front panel.
→ Playback will stop....](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-54.png "Page 55
55
Step 7
Move the cursor onto the [B] (play) button, and then
press the [SET] button. (Or press the [PLAY] button on
the front panel.)
→ Playback of the selected recorded data (in which
motion was detected) will be displayed.
Note:
• When selected time and date is too close to the current time and date, playback may sometimes
not start. In this case, wait for a while and try to
play again.
Step 8
To stop the playback, press the [STOP] button on the
front panel.
→ Playback will stop....")
55 Step 7 Move the cursor onto the [B] (play) button, and then press the [SET] button. (Or press the [PLAY] button on the front panel.) → Playback of the selected recorded data (in which motion was detected) will be displayed. Note: • When selected time and date is too close to the current time and date, playback may sometimes not start. In this case, wait for a while and try to play again. Step 8 To stop the playback, press the [STOP] button on the front panel. → Playback will stop....
Page 56
56 Event function The recorder will take an event action when any of the following events occur. • Terminal alarm: Regarded as an event when an alarm input signal is supplied from an external device such as a door sensor to the alarm input terminal on the rear of the recorder. • Video Motion Detection (VMD): Regard as an event when a motion is detected in images by the video motion detection function. (See below about the VMD function.) • Video loss: Regard as an event when the video input...
Page 57
57 Event actionAlarm mode Activity detection mode Off Start recording b bX Display event information on the screen bX X Blink the alarm indicator bX X Sound the buzzer bX X Switch to the camera channel in which an alarm occurred bX X Move a camera to the preset position b bX Send a mail that notifies of an event occurrence bX X Send a PS·Data command that notifies of an event occur- rence bX X Output signals from the ALARM connector and the ALARM/ CONTROL connector on the rear of the recorder bX X File...
Page 58
![Page 58
58
Suspend the alarm action
Configure the settings to not to perform the alarm action even when an event occ\
urs.
It is useful to suspend the alarm action for a certain period such as wh\
en configuring the settings of the record-
er.
However, recording filing of event logs, preset position function and alarm occurrence indication (on monitor)
will be performed even though the alarm action is being suspended.
Step 1
Press the [ALARM RESET] button and the [SET] but-
ton on the front panel...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-57.png "Page 58
58
Suspend the alarm action
Configure the settings to not to perform the alarm action even when an event occ\
urs.
It is useful to suspend the alarm action for a certain period such as wh\
en configuring the settings of the record-
er.
However, recording filing of event logs, preset position function and alarm occurrence indication (on monitor)
will be performed even though the alarm action is being suspended.
Step 1
Press the [ALARM RESET] button and the [SET] but-
ton on the front panel...")
58
Suspend the alarm action
Configure the settings to not to perform the alarm action even when an event occ\
urs.
It is useful to suspend the alarm action for a certain period such as wh\
en configuring the settings of the record-
er.
However, recording filing of event logs, preset position function and alarm occurrence indication (on monitor)
will be performed even though the alarm action is being suspended.
Step 1
Press the [ALARM RESET] button and the [SET] but-
ton on the front panel...
Page 59
![Page 59
59
Copy recorded images
Step 1
Set a destination media (DVD, SDHC/SD memory
card). (☞ Installation Guide)
Step 2
Press the [Copy] button on the front panel.
→ The data copy window will be displayed.
Note:
• When using a mouse, select "Data copy" from the submenu to display the data copy window.
It is possible to manually copy images recorded in the recorder onto a DVD (DVD–R, DVD+R) or an SDHC/SD
memory card.
It is recommended to make back-up copies on a regular basis for...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-58.png "Page 59
59
Copy recorded images
Step 1
Set a destination media (DVD, SDHC/SD memory
card). (☞ Installation Guide)
Step 2
Press the [Copy] button on the front panel.
→ The data copy window will be displayed.
Note:
• When using a mouse, select \"Data copy\" from the submenu to display the data copy window.
It is possible to manually copy images recorded in the recorder onto a DVD (DVD–R, DVD+R) or an SDHC/SD
memory card.
It is recommended to make back-up copies on a regular basis for...")
59
Copy recorded images
Step 1
Set a destination media (DVD, SDHC/SD memory
card). (☞ Installation Guide)
Step 2
Press the [Copy] button on the front panel.
→ The data copy window will be displayed.
Note:
• When using a mouse, select "Data copy" from the submenu to display the data copy window.
It is possible to manually copy images recorded in the recorder onto a DVD (DVD–R, DVD+R) or an SDHC/SD
memory card.
It is recommended to make back-up copies on a regular basis for...
Page 60
![Page 60
60
Step 3
Specify the detailed conditions of recorded images to
be copied.
Date and time range: Designate the start time and date and the end time and date of recorded imag-
es to be copied by rotating the jog dial (inside).
Move the cursor onto the entry field, and then
press the [SET] button. The software keyboard (for
time and date entry) will be displayed and the time
and date can be entered using it.
Refer to pages 21 and 25 for how to use the soft-
ware keyboard (for time and date...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-59.png "Page 60
60
Step 3
Specify the detailed conditions of recorded images to
be copied.
Date and time range: Designate the start time and date and the end time and date of recorded imag-
es to be copied by rotating the jog dial (inside).
Move the cursor onto the entry field, and then
press the [SET] button. The software keyboard (for
time and date entry) will be displayed and the time
and date can be entered using it.
Refer to pages 21 and 25 for how to use the soft-
ware keyboard (for time and date...")
60
Step 3
Specify the detailed conditions of recorded images to
be copied.
Date and time range: Designate the start time and date and the end time and date of recorded imag-
es to be copied by rotating the jog dial (inside).
Move the cursor onto the entry field, and then
press the [SET] button. The software keyboard (for
time and date entry) will be displayed and the time
and date can be entered using it.
Refer to pages 21 and 25 for how to use the soft-
ware keyboard (for time and date...