Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions

21
Move the position of a panel
It is possible to move a panel to the other corner of 
the screen by rotating the jog dial (inside). When 
rotating the jog dial (inside) clockwise, the panel will 
move to the next corner in order clockwise. When 
rotating the jog dial counterclockwise, it will move 
counterclockwise.
Operations on panels
Panels can be operated by pressing buttons on the 
front panel including the arrows button (C, D, A, B).
Example: When operating the El-zoom panel 
 
 	 •	 Enlarge...

22
Operations of the software keyboard for character entry
When it is necessary to enter characters such as when setting the camera\
 titles on the setup menu, use the 
software keyboard for character entry that can be displayed by pressing the [SET] button after moving the cur-
sor onto the entry field.
    
Functions of each button on the right of the software keyboard are as follows. 
    
Console
[← →] button
Moves the cursor to the right and left in the console 
on the upper side of the keyboard....

23
Operations using a mouse
The recorder can be operated using a mouse connected to the mouse port (☞ page 11) on the front panel.
Move the mouse cursor onto a button or a tab on the screen, and then click on it. 
Note:
	 •	 When	no	operation	is	made	for	10	seconds	or	more,	the	mouse	cursor	will	be	hidden.	The	mouse	cursor	will	 be displayed when the mouse is moved.
	 •	 It	is	impossible	to	connect	a	mouse	to	the	mouse	connection	port	if	the	connector	from	the	mouse	is	upside	 down. When it is hard to...

24
Operations of the submenu
The submenu will be displayed by clicking the [S.Menu] button (☞ page 16) on the status bar.
    
The submenu window is the same window that can be displayed when operati\
ng the buttons on the front panel. 
Refer to page 16 for further information about the functions operable on\
 the submenu and the descriptions 
about them. 
The following are instructions for how to operate the submenu window and a panel display\
ed by selecting a 
submenu (camera control panel, camera...

25
Operations of the software keyboard for time and date entry
When it is necessary to designate time and date such as when searching for images recorded at the specified 
time and date, use the software keyboard for time and date entry that can be displayed by clicking the icon 
 
on the right of the console. 
    
The software keyboard for time and date entry can be operated as follows.
    
Operations of the software keyboard for character entry
When it is necessary to enter characters such as when...

26
The software keyboard for character entry can be operated as follows.
Up to 255 characters can be entered. 
    
Step 1
Select a desired character by clicking it.
  →  The selected character will be displayed in the 
console and the cursor will move to the right. 
Step 2
Repeat step 1 to continue entering characters. 
Step 3
Click the [Enter] button when the character entry is 
complete. 
  →  The entered characters will be applied and the 
software keyboard for character entry will close. 

27
Login operation at startup
When "Off" is selected for "Auto login", the login window will be displayed by p\
ressing any button on the front 
panel after completing the system check. 
Enter a user name and password as follows when the login window is displayed. 
    
Step 1
Enter a user name and password. When the [SET] 
button is pressed after moving the cursor to the entry 
field, the software keyboard for character entry will be 
displayed. 
	 •	 Refer	to	pages	22	and	25	for	how	to...

28
Monitor live images from cameras
When the recorder started up, live images from cameras will be displayed according to the configured settings. 
Live images from cameras are displayed via the recorder. 
    
It is possible to display live images on a 1-screen or on a multiscreen. It is also possible to display live images 
from multiple cameras sequentially by switching the camera channels in order (sequence display). 
    
Camera
Image dataRecorder Monitor 1
Monitor 2 

29
Operation using the buttons on the front panel
Step 1
Press the [MONITOR] button.
Each time the [MONITOR] button is pressed, the 
monitor selection will change. 
  →  The monitor number will light to indicate the moni-
tor currently being selected.
    Operations using a mouse
Step 1
Display the operation panel by right-click, and then 
press the [MONITOR] button. 
  →  The monitor number will light to indicate the moni-
tor currently being selected.
Note:
	 •	 When	displaying	the	operation	panel	or...

30
Display images on a 1-screen
To display live images on a 1-screen, take the following procedures. 
    
Operation using the buttons on the front panel
Step 1
Select a monitor to display images. (☞ Page 29)
Step 2
Select a camera channel from which images are to be 
displayed on the selected monitor by pressing the 
camera selection button (1 - 16). 
  →  The selected camera selection button will light 
and live images will be displayed on the selected 
monitor. 
    Operations using a mouse
Step 1...