Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions

101
Display the [ALM] button in the status display area 
Send a mail that notifies of an event occurrence
A mail that notifies of the event occurrence with the time and date of the event occurrence will be sent (Alarm 
mail).
Up to 4 destination addresses for the alarm mail can be registered. 
To send alarm mails at an event occurrence, configure the settings in advance. 
Refer to page 122 for further information about contents of the alarm ma\
il. 
Send recorded images to an FTP server at an event...

102
Step 1
Click the [ALM] button displayed in the status display 
area. 
  →  The alarm action will be canceled.
    
Note:
	 •	 When	the	alarm	action	is	canceled,	the	event	 recording will stop and return to the operational 
status just before the event occurred. 
	 •	 The	emergency	recording	will	not	stop	by	clicking	 the [ALM] button when the emergency recording 
is being performed. It will stop only when 
"Continue" is selected for "Recording duration" on 
the "Emergency...

103
Cancel an error action
When an error occurred, this recorder will take an error action. To manually cancel an error action, perform the 
following operation. 
    
Step 1
When an error occurs, the [ERR] button will be dis-
played in the status display area.
Step 2
Click the [ERR] button.
  →  The error action will be canceled.
Note:
	 •	 Depnding	on	the	error	type,	the	error	indicator	on	 the front panel may not go ff even after the [ERR] 
button is clicked. 

104
It is possible to manually copy images recorded in the recorder onto a DVD or an SDHC/SD memory card. It is 
recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the 
hard disk drives.
Refer to page 59 for further information about the copy function. 
    
Copy recorded images
Step 1
Display the top page of the operation window. 
(☞ Page 77)
Step 2
Click the button in the [Copy] box. 
  →  The data copy window will be displayed.
Step 3
Specify the...

105
Important:
	 •	 Do	not	remove	the	SDHC/SD	memory	card	during	 copying on the SDHC/SD memory card. It may 
damage data on the SDHC/SD memory card.
	 •	 In	the	following	cases,	copying	will	not	start	even	 when	the	[COPY]	button	is	clicked.	
	 •	 When	the	end	time	is	set	earlier	than	the	start	 time
	 •	 Copying	will	be	performed	even	when	the	remain- ing capacity of the destination media is not 
enough for copying. 
	 •	 When	clicking	the	button	in	the	[COPY]	box	during	 copying, the confirmation...

106
Download recorded images currently being played
Step 1
Display the top page of the operation window.  
(☞ Page 77)
Step 2
Operation can be performed when recorded images 
are being played on a 1-screen. 
Click the [Start] button in the download operation 
area at the desired point to set as the start point of 
the recorded images to be downloaded, or enter time 
and date in the "Start" box directly.
  →  The time and date of the start point will be dis-
played next to the [Start] button....

107
Step 5
Click the [OK] button after selecting "With audio" or 
"Without audio" to determine whether or not to down-
load images with audio and "ON" or "OFF" for "Alter 
detect" to determine whether or not to attach an 
alteration detection code to recorded images to be 
downloaded.
  →  The file download window will be displayed.
Step 6
Click the [Save] button. 
  →  The "Save As" window will be displayed.
Note:
	 •	 When	"With	audio"	is...

108
Play the copied/downloaded recorded images
Step 1
Click the [Viewer] button in the download operation 
area. 
  →  The "File download" window will be displayed.
    Step 2
Click the [Save] button. 
  →  The "Save As" window will be displayed.
    
When recorded images are copied/downloaded, recorded images and audio will be copied/downloaded as an 
image data file (filename.n3r) and an audio data file (filename.n3a)\
 respectively into the copy/download destina-
tion. It is possible...

109
Step 3
Create a new folder in the desired directory and click 
the [Save] button.
  →  The viewer software will be downloaded.
    
Install the viewer software
When the older version of the viewer software is installed on a PC, uninstall it before installing the newer ver-
sion. 
    
Step 1
Double-click the downloaded file (hdrsetup.exe).
  →  The install wizard window will be displayed.
Step 2
Select "Agree", and then click the [Next] button. 
  →  The user information entry fields will be...

110
Step 5
Click the [Install] button.
  →  When the installation is complete, the installation 
completion window will be displayed. 
    Step 6
Click the [Complete] button. 
  →  Installation of the viewer software is complete. 
    
For Windows XP
Step 1
Open "Add or Remove Programs" in "Control Panel". 
Step 2
Select "HD_Viewer" (the program to be deleted) from 
the presently installed programs, and then click the 
[Remove] button. 
  →  The uninstallation program will be...