Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions

							101
Display the [ALM] button in the status display area 
Send a mail that notifies of an event occurrence
A mail that notifies of the event occurrence with the time and date of the event occurrence will be sent (Alarm 
mail).
Up to 4 destination addresses for the alarm mail can be registered. 
To send alarm mails at an event occurrence, configure the settings in advance. 
Refer to page 122 for further information about contents of the alarm ma\
il. 
Send recorded images to an FTP server at an event occurrence
When an event occurs, recorded images will be continued transmitting to an FTP server automatically\
 for the 
set duration from the time when the event occurred. To send recorded images to an FTP server at an event 
occurrence, configure the settings in advance. Note:
	 •	 Images	recorded	from	the	start	time	of	the	event	recording	are	to	be	sent	to	an	FTP	server.	When	multiple	 events occurred, only images recorded from the start time of the first event recording will be sent. 
 
     
						

							102
Step 1
Click the [ALM] button displayed in the status display 
area. 
  →  The alarm action will be canceled.
    
Note:
	 •	 When	the	alarm	action	is	canceled,	the	event	 recording will stop and return to the operational 
status just before the event occurred. 
	 •	 The	emergency	recording	will	not	stop	by	clicking	 the [ALM] button when the emergency recording 
is being performed. It will stop only when 
"Continue" is selected for "Recording duration" on 
the "Emergency rec." page.
 
    
Cancel the alarm action
The recorder will take an alarm action according to the settings configured in advance when an event occurs in 
the alarm mode (ALM). To manually cancel the alarm action, perform the following operation.
    
Suspend the alarm action
Configure the settings to not to perform the alarm action even when an event occ\
urs. It is useful to suspend the 
alarm action at an event occurrence such when maintaining the recorder for a certain period. However, record-
ing, filing of event logs, preset action and displaying of the [ALM] button will be performed even th\
ough the 
alarm action is being suspended. 
    
Step 1
Display the operation window.
    Step 2
Click the [ALARM SUSPEND] button.
The [ALARM SUSPEND] indicator will light and the 
alarm action will be suspended. 
Step 3
Click the [ALARM SUSPEND] button.
The [ALARM SUSPEND] indicator will go off and the 
suspended alarm action will be released.
     
						

							103
Cancel an error action
When an error occurred, this recorder will take an error action. To manually cancel an error action, perform the 
following operation. 
    
Step 1
When an error occurs, the [ERR] button will be dis-
played in the status display area.
Step 2
Click the [ERR] button.
  →  The error action will be canceled.
Note:
	 •	 Depnding	on	the	error	type,	the	error	indicator	on	 the front panel may not go ff even after the [ERR] 
button is clicked. 
						

							104
It is possible to manually copy images recorded in the recorder onto a DVD or an SDHC/SD memory card. It is 
recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the 
hard disk drives.
Refer to page 59 for further information about the copy function. 
    
Copy recorded images
Step 1
Display the top page of the operation window. 
(☞ Page 77)
Step 2
Click the button in the [Copy] box. 
  →  The data copy window will be displayed.
Step 3
Specify the detailed conditions of recorded images to 
be copied.
Date and time range: Designate the start time and  date and the end time and date of recorded imag-
es to be copied. 
    Click the [C] button, and then designate time and  date. 
    
REC event: Select an event type of recorded images  from the following. Select the event type by 
checking the checkbox corresponding to the 
desired event type. The checkbox respective to 
the selected event type will be checked. (When 
selecting "All", all the checkboxes will be 
checked.)
Camera: Select a camera channel used for recording. 
    Select the camera channel by checking the  checkbox corresponding to the desired camera 
channel. To select all camera channels, select 
"All". 
Copy drive: Select a DVD or an SDHC/SD memory  card as a copying destination. 
    Check the checkbox corresponding to either of  "HDD → DVD" or "HDD → SDHC/SD memory 
card". 
Alter detect: Determine whether or not to attach the  alteration detection code to the recorded images 
to be copied. 
    When the alteration detection code is attached, it  is possible to check if the copied recorded images 
have been altered or not when playing the copied 
recorded images using the viewer software. 
    Click the [C] button, and then select "On" or  "Off". 
Data size: When the [Measurement] button is clicked,  size of the data to be copied will be displayed.
Remaining capacity: The remaining capacity of the  destination media (SDHC/SD memory card or 
DVD) will be displayed.
Step 4
Click the [OK] button.
  →  The data copy window will close. Copying will 
start	and	the	[COPY]	icon	
 will be displayed in 
the status display area. When copying is com-
plete,	the	[COPY]	icon	will	disappear.
Note:
	 •	 When	selecting	"DVD	Drive"	even	though	an	 optional built-in DVD drive is not installed, the 
error message of "No media is inserted" will be 
displayed.
 
     
						

							105
Important:
	 •	 Do	not	remove	the	SDHC/SD	memory	card	during	 copying on the SDHC/SD memory card. It may 
damage data on the SDHC/SD memory card.
	 •	 In	the	following	cases,	copying	will	not	start	even	 when	the	[COPY]	button	is	clicked.	
	 •	 When	the	end	time	is	set	earlier	than	the	start	 time
	 •	 Copying	will	be	performed	even	when	the	remain- ing capacity of the destination media is not 
enough for copying. 
	 •	 When	clicking	the	button	in	the	[COPY]	box	during	 copying, the confirmation window for cancellation 
of the current copying will be displayed. It is pos-
sible to cancel the current copying on this win-
dow. 
  
						

							106
Download recorded images currently being played
Step 1
Display the top page of the operation window.  
(☞ Page 77)
Step 2
Operation can be performed when recorded images 
are being played on a 1-screen. 
Click the [Start] button in the download operation 
area at the desired point to set as the start point of 
the recorded images to be downloaded, or enter time 
and date in the "Start" box directly.
  →  The time and date of the start point will be dis-
played next to the [Start] button. 
    Step 3
Click the [End] button in the download operation area 
at the desired point to set as the end point of the 
recorded images to be downloaded, or enter time and 
date in the "End" box directly. 
  →  The time and date of the end point will be dis-
played next to the [End] button. It is possible to 
designate up to 20 minutes of the time range per 
download.
Step 4
Click the [Download] button.
  →  The "Download" window will be displayed.
    
Designate the start point and the end point of recorded images currently being played and download images to 
a PC.
When downloading recorded images, recorded images and audio will be downloaded as an image data file (file-
name.n3r) and an audio data file (filename.n3a) respectively. Refer to page 108 for information on how to play 
downloaded recorded images. 
Important:
	 •	 When	downloading,	the	available	disk	capacity	must	be	2	or	more	times	the	size	of	the	file	to	be	download- ed*.* It is a feature of Internet Explorer. 
	 •	 When	download	is	canceled	in	the	process	of	the	download,	it	may	be	impossible	to	properly	play	the	 downloaded file on a PC. 
 
     
						

							107
Step 5
Click the [OK] button after selecting "With audio" or 
"Without audio" to determine whether or not to down-
load images with audio and "ON" or "OFF" for "Alter 
detect" to determine whether or not to attach an 
alteration detection code to recorded images to be 
downloaded.
  →  The file download window will be displayed.
Step 6
Click the [Save] button. 
  →  The "Save As" window will be displayed.
Note:
	 •	 When	"With	audio"	is	selected,	the	"Download"	 window will be displayed again after the download 
is complete. 
 
Step 7
Create a new folder in the desired directory and click 
the [Save] button.
  →  Recorded images and audio will be downloaded 
as an image data file (filename.n3r) and an audio 
data file (filename.n3a) respectively.
Note:
	 •	 If	a	message	is	displayed	on	the	information	bar,	 see page 127. 
	 •	 When	playing	on	a	multiscreen,	it	is	impossible	to	 download recorded images. 
  
						

							108
Play the copied/downloaded recorded images
Step 1
Click the [Viewer] button in the download operation 
area. 
  →  The "File download" window will be displayed.
    Step 2
Click the [Save] button. 
  →  The "Save As" window will be displayed.
    
When recorded images are copied/downloaded, recorded images and audio will be copied/downloaded as an 
image data file (filename.n3r) and an audio data file (filename.n3a)\
 respectively into the copy/download destina-
tion. It is possible to play, save and print the copied/downloaded data files using the dedicated vi\
ewer software. 
Viewer software to play recorded images copied on an SDHC/
SD memory card or a DVD
Double-click the executable file (HD_Viewer.exe) to launch the viewer software. The executable folder is copied 
in the following folder together with recorded images. Copy destination:   SDHC/SD memory card 
[Drive]: \PRIVATE\MEIGROUP\PSS\HDR\HD_Viewer
Copy destination:   DVD 
[Drive]: \
Refer to page 111 for how to use the viewer software.
Note:
	 •	 The	viewer	software	copied	onto	an	SDHC/SD	memory	card	or	a	DVD	is	software	that	can	be	launched	 without installation on a PC. When copying the viewer software to the other folder, copy all the files.
Viewer software to play recorded images downloaded using a 
web browser
It is necessary to install the viewer software to a PC to play downloaded recorded images using the viewer soft-
ware.
Download the viewer software using a web browser and install it on a PC to use the viewer software to play 
recorded images.
	 •	 Donload	the	viewer	software	(☞ page 108)
	 •	 Install	the	viewer	software	(☞ page 109)
Refer to page 111 for how to use the viewer software.
Download the viewer software 
     
						

							109
Step 3
Create a new folder in the desired directory and click 
the [Save] button.
  →  The viewer software will be downloaded.
    
Install the viewer software
When the older version of the viewer software is installed on a PC, uninstall it before installing the newer ver-
sion. 
    
Step 1
Double-click the downloaded file (hdrsetup.exe).
  →  The install wizard window will be displayed.
Step 2
Select "Agree", and then click the [Next] button. 
  →  The user information entry fields will be displayed.
    Step 3
Complete the user information on the user informa-
tion entry window, and then click the [Next] button. 
  →  The setup type section radio buttons will be dis-
played. 
    User information entry is not required to proceed.
Step 4
Select "All", and then click the [Next] button. 
  →  The wizard is ready to install.
 
   
						

							110
Step 5
Click the [Install] button.
  →  When the installation is complete, the installation 
completion window will be displayed. 
    Step 6
Click the [Complete] button. 
  →  Installation of the viewer software is complete. 
    
For Windows XP
Step 1
Open "Add or Remove Programs" in "Control Panel". 
Step 2
Select "HD_Viewer" (the program to be deleted) from 
the presently installed programs, and then click the 
[Remove] button. 
  →  The uninstallation program will be launched. 
Step 3
Complete the uninstallation by following the instruc-
tions of the wizard. 
    
For Windows Vista
Step 1
Open "The uninstall program" in "Control Panel". 
Step 2
Select "HD_Viewer" (the program to be deleted) from 
the presently installed programs, and then right-click 
on it. Select "Uninstall and Change" from the dis-
played right-click menu. 
  →  The uninstallation program will be launched. 
Step 3
Complete the uninstallation by following the instruc-
tions of the wizard. 
    
Uninstall the viewer software