Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 91
91 Playback operation FunctionButton Operation Pause • Playback will be paused when this button is clicked during play- back. • Playback will resume when this button is pressed during pause. Fast playback/Fast reverse playback / • Playback speed of fast playback will change in the following order each time the fast playback button is clicked: Step2 (Approx. 2x) → Step3 (Approx. 5x) → Step4 (Approx. 10x) → Step5 (Approx. 20x) → Step6 (Approx. 50x) → Step7 (Approx. 100x) • Playback speed...
Page 92
![Page 92
92
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Click the [HDD] tab.
→ The [HDD] tab will be displayed.
Step 3
Click the [Go to date] button.
→ The time and date search window will be dis-
played.
Step 4
Click the
button and determine the desired time
and date.
Step 5
Click the [Play] button.
→ Playback of images recorded at the designated
time and date will start. The
indication will be
displayed in the status display area.
Note:
• When no image is...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-91.png "Page 92
92
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Click the [HDD] tab.
→ The [HDD] tab will be displayed.
Step 3
Click the [Go to date] button.
→ The time and date search window will be dis-
played.
Step 4
Click the
button and determine the desired time
and date.
Step 5
Click the [Play] button.
→ Playback of images recorded at the designated
time and date will start. The
indication will be
displayed in the status display area.
Note:
• When no image is...")
92 Step 1 Display the top page of the operation window. (☞ Page 77) Step 2 Click the [HDD] tab. → The [HDD] tab will be displayed. Step 3 Click the [Go to date] button. → The time and date search window will be dis- played. Step 4 Click the button and determine the desired time and date. Step 5 Click the [Play] button. → Playback of images recorded at the designated time and date will start. The indication will be displayed in the status display area. Note: • When no image is...
Page 93
![Page 93
93
Search and play
Number of the listed data
Displays the total number of listed copied data. When
more than 10 000 data matched, the ">10000" indi-
cation will be displayed.
[All list] button
Cancels filtering and lists all recording events.
Search a desired recorded image and play it. There are the following 2 searching methods.
• Search for recording events and play (recording event search)
• Search for time and date when a motion was detected from recorded images and play...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-92.png "Page 93
93
Search and play
Number of the listed data
Displays the total number of listed copied data. When
more than 10 000 data matched, the \">10000\" indi-
cation will be displayed.
[All list] button
Cancels filtering and lists all recording events.
Search a desired recorded image and play it. There are the following 2 searching methods.
• Search for recording events and play (recording event search)
• Search for time and date when a motion was detected from recorded images and play...")
93
Search and play
Number of the listed data
Displays the total number of listed copied data. When
more than 10 000 data matched, the ">10000" indi-
cation will be displayed.
[All list] button
Cancels filtering and lists all recording events.
Search a desired recorded image and play it. There are the following 2 searching methods.
• Search for recording events and play (recording event search)
• Search for time and date when a motion was detected from recorded images and play...
Page 94
![Page 94
94
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Select "HDD" for "Disk/Media" in the [Search] box,
and then click the [REC Event] button.
→ The "REC event search" window will be displayed.
Step 3
Specify the search conditions (filters).
Time & date: Designate the recording start time and date and the end time and date of recorded imag-
es to be searched for.
Select a start time and an end time by clicking the
[C] button.
[Refresh]...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-93.png "Page 94
94
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Select \"HDD\" for \"Disk/Media\" in the [Search] box,
and then click the [REC Event] button.
→ The \"REC event search\" window will be displayed.
Step 3
Specify the search conditions (filters).
Time & date: Designate the recording start time and date and the end time and date of recorded imag-
es to be searched for.
Select a start time and an end time by clicking the
[C] button.
[Refresh]...")
94
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Select "HDD" for "Disk/Media" in the [Search] box,
and then click the [REC Event] button.
→ The "REC event search" window will be displayed.
Step 3
Specify the search conditions (filters).
Time & date: Designate the recording start time and date and the end time and date of recorded imag-
es to be searched for.
Select a start time and an end time by clicking the
[C] button.
[Refresh]...
Page 95
95
REC event: Select an event type of recorded images to be searched for from the following. The check-
box respective to the selected event type will be
checked. (When selecting "All", all the checkbox-
es will be checked.)
Camera: Select the desired camera channel used for recording to be searched by clicking.
Select the desired camera channel used for
recording. The checkbox respective to the select-
ed camera channel will be checked. (When select-
ing "All", all the checkboxes...
Page 96
![Page 96
96
Step 1
Display the top page of the operation window
(☞ page 77), and then select the camera channel to
be searched for in the [Cam. select] box.
Step 2
Click the [VMD] button in the [Search] box.
→ The VMD search filter window will be displayed.
Step 3
Specify the search conditions (filters).
Set detection area and detection sensitivity
Up to 4 detection areas (A - D) can be set. Set detec-
tion areas and detection sensitivities for each of them
as follows.
1. Create a detection...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-95.png "Page 96
96
Step 1
Display the top page of the operation window
(☞ page 77), and then select the camera channel to
be searched for in the [Cam. select] box.
Step 2
Click the [VMD] button in the [Search] box.
→ The VMD search filter window will be displayed.
Step 3
Specify the search conditions (filters).
Set detection area and detection sensitivity
Up to 4 detection areas (A - D) can be set. Set detec-
tion areas and detection sensitivities for each of them
as follows.
1. Create a detection...")
96
Step 1
Display the top page of the operation window
(☞ page 77), and then select the camera channel to
be searched for in the [Cam. select] box.
Step 2
Click the [VMD] button in the [Search] box.
→ The VMD search filter window will be displayed.
Step 3
Specify the search conditions (filters).
Set detection area and detection sensitivity
Up to 4 detection areas (A - D) can be set. Set detec-
tion areas and detection sensitivities for each of them
as follows.
1. Create a detection...
Page 97
![Page 97
97
Specify the mask duration
Click the [C] button, and then select the mask dura-
tion from the following.
1 s, 1 min, 1 h, 24h
When the mask duration is set, any motion will not be
detected for the set duration after a motion detection.
Use the mask duration when it takes time to detect
motion or when motion is detected frequently.
Specify the time range
Click the [C] button, and then specify the time range
to be searched for.
Step 4
Click the [OK] button after completing the settings.
→...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-96.png "Page 97
97
Specify the mask duration
Click the [C] button, and then select the mask dura-
tion from the following.
1 s, 1 min, 1 h, 24h
When the mask duration is set, any motion will not be
detected for the set duration after a motion detection.
Use the mask duration when it takes time to detect
motion or when motion is detected frequently.
Specify the time range
Click the [C] button, and then specify the time range
to be searched for.
Step 4
Click the [OK] button after completing the settings.
→...")
97 Specify the mask duration Click the [C] button, and then select the mask dura- tion from the following. 1 s, 1 min, 1 h, 24h When the mask duration is set, any motion will not be detected for the set duration after a motion detection. Use the mask duration when it takes time to detect motion or when motion is detected frequently. Specify the time range Click the [C] button, and then specify the time range to be searched for. Step 4 Click the [OK] button after completing the settings. →...
Page 98
![Page 98
98
Number of the listed data
Displays the total number of listed copied data. When
more than 10 000 data matched, the ">10000" indi-
cation will be displayed.
[All list] button
Cancels filtering and lists all copied data.
[Refresh] button
The displayed contents will be updated to the latest.
[Prev page] button
Displays the previous page.
[Next page] button
Displays the next page.
Time & date
Displays the start time and date of the copied data
(time and date when copying started) will be...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-97.png "Page 98
98
Number of the listed data
Displays the total number of listed copied data. When
more than 10 000 data matched, the \">10000\" indi-
cation will be displayed.
[All list] button
Cancels filtering and lists all copied data.
[Refresh] button
The displayed contents will be updated to the latest.
[Prev page] button
Displays the previous page.
[Next page] button
Displays the next page.
Time & date
Displays the start time and date of the copied data
(time and date when copying started) will be...")
98 Number of the listed data Displays the total number of listed copied data. When more than 10 000 data matched, the ">10000" indi- cation will be displayed. [All list] button Cancels filtering and lists all copied data. [Refresh] button The displayed contents will be updated to the latest. [Prev page] button Displays the previous page. [Next page] button Displays the next page. Time & date Displays the start time and date of the copied data (time and date when copying started) will be...
Page 99
![Page 99
99
Step 1
Insert an SDHC/SD memory card on which recording
data is copied into the SDHC/SD memory card slot.
When recording data was copied on a DVD, insert it
in the DVD drive. (☞ Installation Guide)
Step 2
Display the top page of the operation window.
(☞ Page 77)
Step 3
Select "DVD" or "SD" for "Disk/Medium" in the
[Search] box, and then click the [Copy data] button.
→ The copy data search window will be displayed.
Step 4
Specify the search conditions (filters).
Refer...](http://img.usermanuals.tech/thumb/58/72247/w300_wj-hd616_716_oi_d-98.png "Page 99
99
Step 1
Insert an SDHC/SD memory card on which recording
data is copied into the SDHC/SD memory card slot.
When recording data was copied on a DVD, insert it
in the DVD drive. (☞ Installation Guide)
Step 2
Display the top page of the operation window.
(☞ Page 77)
Step 3
Select \"DVD\" or \"SD\" for \"Disk/Medium\" in the
[Search] box, and then click the [Copy data] button.
→ The copy data search window will be displayed.
Step 4
Specify the search conditions (filters).
Refer...")
99 Step 1 Insert an SDHC/SD memory card on which recording data is copied into the SDHC/SD memory card slot. When recording data was copied on a DVD, insert it in the DVD drive. (☞ Installation Guide) Step 2 Display the top page of the operation window. (☞ Page 77) Step 3 Select "DVD" or "SD" for "Disk/Medium" in the [Search] box, and then click the [Copy data] button. → The copy data search window will be displayed. Step 4 Specify the search conditions (filters). Refer...
Page 100
100 Event function The recorder will take an event action when any of the following events occur. Terminal alarm: Regarded as an event when an alarm input signal is supplied from an external device such as a door sensor to the alarm input terminal on the rear of the recorder. Video Motion Detection (VMD): Regard as an event when a motion is detected in the set detection area by the video motion detection function. (See below about the VMD function.) Video loss: Regard as an event when the video input...