Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

71
 Chapter 4    Fax/Email Settings
6Select “40-79”.
7Select “43 Password-Transmit” or 
“44 Password-Receive”.
8Enter the Identification Code (4-digit), 
and then select “OK”.
(Ex: Password-Transmit screen, 
password: 5678)
zIf you have made an input error, select 
“Clear” on the screen to delete all 
characters at a time.
9Select “On”, and then select “OK”.
10Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 

72
 Chapter 4    Fax/Email Settings
Example : Select Receive
Select Receive can prevent the receiving of unnecessary originals (Ex: junk fax, direct mail, etc.).
The procedure of setting Select Receive is described below.
For more details about Select Receive, refer to Convenient Reception Features in the Operating Instructions 
(For Facsimile and Internet Fax) on the provided CD-ROM.
1Press the Function key.
2Select “Fax/Email Settings”.
3Select “04 Key Operator Mode”.
4Enter the password (8-digit), and...

73
 Chapter 4    Fax/Email Settings
7Select .
8Select “46 Select Receive”.
9Select “Va l id”, and then select “OK”.
10Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 

74
 Chapter 4    Fax/Email Settings
Example : Initial Sending Station (LAN Relay)
The following setting is required for selecting whether the machine performs LAN Relay XMT Request:
Set the above item according to the descriptions.
For more details about Initial Sending Station (LAN Relay), refer to Use the Relay Feature in the Operating 
Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
LAN RLY XMT Request (Fax parameter 140)
Set the LAN relay transmission request function.
1Press...

75
 Chapter 4    Fax/Email Settings
6Select “120-159”, and then select   
(4 times).
zFax Parameters can be directly selected 
using a keypad for quick operation. If a 
Parameter No. is known, enter the desired 
Parameter No. with a keypad, and then 
press the Start key.
Ex:In step 6, enter “140” with a keypad, and 
press the “Start” key to select “140 LAN 
RLY XMT Request”.
7Select “140 LAN RLY XMT Request”.
8Select “Va l id”, and then select “OK”.
9 Select “Close”.
zAfter setting up the function(s),...

76
 Chapter 4    Fax/Email Settings
Example : Relay Station (LAN Relay)
To set up your machine as a Relay Station, the following settings are required:
Set the above items according to the descriptions.
For more details about Relay Station (Lan Relay), refer to Use the Relay Feature in the Operating Instructions 
(For Facsimile and Internet Fax) on the provided CD-ROM.
Relay XMT (Fax parameter 142)
Set the LAN Relay Transmission function.
1Press the Function key.
2Select “Fax/Email Settings”.
3Select “04...

77
 Chapter 4    Fax/Email Settings
6Select “120-159”, and then select   
(4 times).
zFax Parameters can be directly selected 
using a keypad for quick operation. If a 
Parameter No. is known, enter the desired 
Parameter No. with a keypad, and then 
press the Start key.
Ex:In step 6, enter “142” with a keypad, and 
press the “Start” key to select “142 
Relay XMT”.
7Select “142 Relay XMT”.
8Select “Va l id”, and then select “OK”.
zAdvance to Relay XMT Report (Fax 
parameter 143) (see page 77), and set...

78
 Chapter 4    Fax/Email Settings
Relay XMT Password (User parameter 36)
Enter a Relay XMT Password (up to 10 characters) to be used for protection against unauthorized
(outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. 
This password should be given out to authorized personnel only.
1Select “00 User Parameters”.
2Select “30-39”, and then select  .
3Select “36 Relay XMT Password”.
4Enter the Password (up to 10 
characters), and then select “OK”.
zAdvance to...

79
 Chapter 4    Fax/Email Settings
Manager’s Email Addr (User parameter 37)
Enter the Department Manager’s Email Address for notification of all Internet relayed transmissions for 
supervision and cost control purposes. 
1Select “37 Manager’s Email Addr”.
2Enter the Email Address (up to 60 
characters), and then select “OK”.
zAdvance to Relay Domain 01 to 10 (User 
parameters 40 to 49) (see page 80), and 
set the Relay Domains. 

80
 Chapter 4    Fax/Email Settings
Relay Domain 01 to 10 (User parameters 40 to 49)
Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax for Relayed 
XMT Request. 
1Select .
2Select domain names from “40 Relay 
Domain (01)” to “49 Relay Domain 
(10)”. (Up to 10 domain names)
zSelect   to select from “45 Relay Domain 
(06)” to “49 Relay Domain (10)”.
3Enter a LAN relay domain name, and 
then select “OK”. (Up to 30 
characters)
4Select “Close”.
zAfter setting up the...