Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

21
 Chapter 2    General Settings
5Enter the password (8-digit), and then 
press “OK”.
6Select “20-39”.
7Select “21 Dept. Counter Mode”.
The Dept. Counter Mode screen appears.For the subsequent steps, refer to the relevant 
section. 
‰Registering/Changing the Password 
(Department Code)
You can register/change the password 
(department code) of each department.
Refer to Registering/Changing the 
Password (Department Code) (see page 
22). 
‰Clearing the Total Counter
You can clear the total departmental...

22
 Chapter 2    General Settings
„Registering/Changing the Password (Department Code)
1Select “Identification Code”.
2Select the department number subject 
to password (department code) 
registration/change, and then press 
“Input”.
3Enter the department code (up to 8-
digit), and then select “OK”.
4Enter the department name (up to 25 
characters), and then select “OK”.
5Select “OK”.
6Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of...

23
 Chapter 2    General Settings
„Clearing the Total Counter
1If the total counter is not displayed, 
select “Total Counter”.
2Select “Clear”.
3Select “Ye s” to clear the counter.
4Select “OK”.
5Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 

24
 Chapter 2    General Settings
„Printing a Departmental List or Report
1Select “Print List”.
2Select the list or report you want to 
print, and then select “OK”.
zPrinting of the selected list or report starts.
3When printing is completed, select 
“OK”.
4Select “Close”. 
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode.
„Changing the Departmental Counter
1Select “Departmental Counter”.
2Select the department number subject...

25
 Chapter 2    General Settings
5Select “Input”, input a count (up to 7 
digits) from the keypad, and then 
select “OK”.
6Select “Close”.
7Select “Close”.
8Select “OK”.
9Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 

26
 Chapter 2    General Settings
„Changing the Maximum Prints
1Select “Maximum Prints”.
2Select the department number subject 
to departmental limit change, and then 
select “Input”.
3Select the count limit you want to 
change.
4Select “Input”, input a new limit (up to 
7 digits) from the keypad, and then 
select “OK”.
zIf you input “9999999”, the copy count limit 
becomes infinite.
zIf the set limit is exceeded, the machine 
stops automatically.
5Select “Close”.
6Select “OK”.
7Select “Close”.
zAfter...

27
 Chapter 2    General Settings
Memo 

28
 Chapter 2    General Settings
Example : Depar tmental Counter
When the Dept. Counter Mode is selected, you can display your selected departmental counter. 
zTo use the Dept. Counter Mode, a special service setting is necessary. Contact your authorized Panasonic 
dealer. 
z
For instruction on how to set departmental counters, refer to Example : Dept. Counter Mode (see page 20).
zWhen the departmental counter function is enabled, the password (department code) entry screen appears on 
the touch panel...

29
 Chapter 2    General Settings
Memo 

30
 Chapter 2    General Settings
Example : Date Time Setting
zThe clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. So, your clock will 
automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April or on the 2nd Sunday of 
March. At the end of the Daylight Saving Time (on the last Sunday of October or 1st Sunday of November), the 
clock will set the time back  from 2:00 AM to 1:00 AM. For setting the Daylight Time, refer to “24 Daylight Time” 
in...