Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

41
 Chapter 3    Copier Settings
Example : Manual Skyshot Mode
In Manual Skyshot Mode, the scanning area (size) is pre-registered into memory (M1 and M2) in 
advance.This mode also allows copying an original without generating dark borders even if the platen 
cover is opened.
zAn incorrect exposure may occur when there is a black line at the edge of the original.
zSort function (Sort, Shift-Sort, Rotate-Sort, Staple-Sort) is not available in Manual Skyshot Mode.
1Press the Function key.
2Select “Copier...

42
 Chapter 4    Fax/Email Settings
Chapter 4
Fax/Email Settings
Fax/Email Settings
In Fax/Email Settings Mode, the following items can be changed.
For registration of the Address Book or Program Keys, refer to Program Destinations/Program Keys 
in the Operating Instructions (For Facsimile and Internet Fax) on the provided CD-ROM.
Fax/Email Settings
Address Book
Program Keys
Key Operator Mode
No.ParameterComments
0 - 4 00 Address Book To open the Address Book setting screen.
01 Program Keys To open the...

43
 Chapter 4    Fax/Email Settings
 
zFor user parameter settings, refer to Facsimile Settings (Option) in the Operating Instructions (For Setting 
Up) of provided booklet.
zNetwork Configuration should be setup by the System Administrator.
User Parameters
No.ParameterCommentsSelective 
ItemStandard 
Setting
0 - 9 00 Print User Parameter List Print a User Parameter List. Stop, Start Start
01 Logo Set the Logo.
Ex: PanasonicUp to 25 
characters
02 Character ID Set the Character ID.
Ex: HEAD OFFICEUp to...

44
 Chapter 4    Fax/Email Settings
10 - 19 15 LDAP Server Name When “29 DNS Server Address” in General 
Settings is set to “Ye s”, set the LDAPServer 
Name.
The default Port Number is changed by 
setting SSL.
zRefer to Example : LDAP Server (see 
page 62).Up to 60 
characters
“SSL”
Off:389
On:636
16 LDAP Server IP When “29 DNS Server Address” in General 
Settings is set to “No”, set the LDAP Server 
IP Address.
The default Port Number is changed by 
setting SSL.
zRefer to Example : LDAP Server (see...

45
 Chapter 4    Fax/Email Settings
30 - 39 36 Relay XMT Password Set the LAN relay password to provide 
network security to your Relay Station.
zRefer to Example : Relay Station (LAN 
Relay) (see page 76).Up to 10 
characters
37 Manager’s Email Addr Set the Department Manager’s Email 
Address for notification of all Internet
relayed transmissions for supervision and 
cost control purposes. 
zRefer to Example : Relay Station (LAN 
Relay) (see page 76).Up to 60 
characters
39 Fax Server Mail Address...

46
 Chapter 4    Fax/Email Settings
Fax Parameters
No.ParameterCommentsSelective ItemStandard
Setting
0 - 39 00 Print FaxParameterList Print a fax parameter list.
To cancel printing the fax 
parameter list, press “Stop” and 
“OK”. 
While processing the 
cancellation, panel operation is 
denied, and an error beep is 
produced.
The feeding paper(s) will be 
ejected before completing the 
above cancellation operation.
If setting a parameter, an 
asterisk mark (*) will be added 
before the parameter...

47
 Chapter 4    Fax/Email Settings
0 - 39 07 Header Print Select the printing position of 
sender’s information (Header) 
on the received original.
• Outside
If there is no margin (about 10 
mm from the edge) to print 
the sender’s information, the 
received image may be 
reduced in size. 
•Inside
Part of the received image 
(about 10 mm from the edge) 
may be missing because it is 
overwritten with the sender’s 
information print.
•No Print
Sender’s information is not 
printed.Inside, Outside, 
No...

48
 Chapter 4    Fax/Email Settings
0 - 39 14 File Accept Report Set whether to print an 
acceptance report when 
memory transmission is 
accepted.
The report states the number of 
accepted originals and the 
destination.Invalid, Valid Invalid
17 Receive Mode Select a fax reception method.
• Manual
Select manual reception.
•Auto
Select automatic reception.
For the fax reception methods, 
refer to Receiving Documents 
in the Operating Instructions 
(For Facsimile and Internet Fax) 
on the provided...

49
 Chapter 4    Fax/Email Settings
0 - 39 27 Polled File Save Set whether to delete an original 
from memory after the polling 
transmission.
• Invalid
After polling transmission, the 
original is deleted from 
memory.
• Valid
Even after polling 
transmission, the original is 
kept in memory.Invalid, Valid Invalid
28 Stamp at Memory XMT Set whether to stamp the 
originals when storing them into 
memory.
• Invalid
Originals are not stamped.
• Valid
Originals are stamped.
(Depending on the Stamp 
setting...

50
 Chapter 4    Fax/Email Settings
0 - 39 37 Receive to Memory Set the 4-digit password for 
printing a memory-received 
original.
zIf “Receive to Memory” in 
“More Menus” is “ON”, this 
setting can not be selected.
zRefer to Example : Receive 
to Memory (see page 68).
39 PIN Code Access When the machine is connected 
to PBX and Personal 
Identification Number (PIN) 
Code is required, select the 
access method (Prefix or Suffix) 
to dial a number with PIN Code.
• None
No PIN code is added.
• Suffix
A...