Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

31
 Chapter 2    General Settings
8Select “Input”, and then enter the 
Date and Time.
Ex: August/1st/2006 00:00
9Select “OK”.
10Select “Close”.
zAfter setting up the function(s), press the 
Reset key to return the machine to the initial 
screen of the current active mode. 

32
 Chapter 3    Copier Settings
Chapter 3
Copier Settings
Copier Settings
In Copier User Mode, the following items can be changed.
Copier User
No.ParameterCommentsSelective ItemStandard
Setting
0 - 4 00 Margin Value 
DefaultSet the default margin. 5 mm, 10 mm, 15 
mm, 20 mm10 mm
01 Edge Value 
DefaultSet the default edge. 5 mm, 10 mm, 15 
mm, 20 mm5 mm
02 Book Value 
DefaultSet the default book. 15 mm, 20 mm, 25 
mm, 30 mm20 mm
03 Margin Reduction 
Def.To copy with the binding margin, set 
whether to...

33
 Chapter 3    Copier Settings
5 - 9 06 Reduce N in 1 for 
Spa ceFor N in 1 Copy, set whether to leave a 
margin between copy images.
•No
No margin is inserted.
•Yes
A margin is inserted.No, Yes No
07 Booklet Default 
Mag.For Booklet Copy, set whether to reduce 
the copy image and add a center margin.
• 100%
8.5 x 11 sized originals are copied onto 
11 x 17 sized paper without 
reduction.
• Reduce
8.5 x 11 sized originals are reduced to 
5.5 x 8.5 in size and copied onto 8.5 x 11 
sized paper.100%,...

34
 Chapter 3    Copier Settings
5 - 9 08 Digital Skyshot 
ModeEnable or disable Digital Skyshot Mode.
•No
Digital Skyshot Mode is disabled.
•Normal
Skyshots are used with standard quality.
• Quality
Skyshots are used with better quality 
than in “Normal”.
zRefer to Example : Digital Skyshot 
Mode (see page 40).No, Normal, Quality Normal
09 Manual Skyshot 
ModeEnable or disable Manual Skyshot Mode.
•Off
Manual Skyshot Mode is disabled.
•M1,On
The image is copied in pre-registered M1 
size.
(Standard...

35
 Chapter 3    Copier Settings
15 - 19 15 Img. Repeat 
Dotted LineSet whether to print perforations between 
copy images in image repeat copying.
• None
Perforations are not printed.
•Print
Perforations are printed.None, Print Print
16 Staple Position 
SettingSet the default stapling position. Upper R, Upper L,
L Center, U Center, 
R Center
(R: Right, L: Left, 
 U: Upper) Upper L
17 Hole Punch 
DefaultSet the default punch. Off, On Off
18 Double Exposure Set the default double exposure. Off, On On
20 -...

36
 Chapter 3    Copier Settings
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
0 - 9 00 Print Copier Settings Print a Copier Settings list.
To cancel printing the copier 
setting list, press “Stop” and “OK”. 
While processing the cancellation, 
panel operation is denied, and an 
error beep is produced.
The feeding paper(s) will be 
ejected before completing the 
above cancellation operation.
If setting a parameter, an asterisk 
mark (*) will be added before the 
parameter number.St o p,...

37
 Chapter 3    Copier Settings
10 - 19 10 Bleedthrough Prevention Set the default bleedthrough 
prevention.Off, Level:1 to Level:6 Off
11 Contrast Set the default contrast. -3 to +3 0
12 Sharpness Set the default sharpness. -3 to +3 0
13 Saturation Set the default color saturation. -3 to +3 0
14 Tint Set the default tint. -3 to +3 0
15 Color Balance Set the default color balance for 
Cyan, Magenta, Yellow and 
Black.
(Darker, Medium and Lighter 
Areas)-3 to +3 0
20 - 29 21 Page Insertion Default Set...

38
 Chapter 3    Copier Settings
30 - 39 30 Color Spec (Overlay) Set the default overlay color.
z“Preset 1 to 6” can be 
selected when you set “20 
Add User Color” in Copier 
Settings.Full, Red, Magenta, 
Green, Cyan, Blue, 
Black, Yellow, White, 
Preset1, Preset2, 
Preset3, Preset4, 
Preset5, Preset6Full
31 Mono Color Judge Level Set the auto detection level for 
color original.
1: Making an original easier to 
detect as monochrome.
7: Making an original easier to 
detect as colored.1 to 7 4
32 Color...

39
 Chapter 3    Copier Settings
Memo 

40
 Chapter 3    Copier Settings
Example : Digital Skyshot Mode
Digital Skyshot Mode allows copying an original without generating dark borders even if the platen 
cover is opened.
zWhen copying in “Quality” mode combined with “N in 1” or “2 Page”, the Quality mode will be changed to 
“Normal” mode automatically.
1Press the Function key.
2Select “Copier Settings”.
3Select “5-9”.
4Select “08 Digital Skyshot Mode”.
5Select the desired item, and then 
select “OK”.
6Select “Close”.
zAfter setting up the...