Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

81
 Chapter 2    More Menus Features
Overlay Copying with Registered Image
Overlay an image stored in memory onto the copy.
zAvailable size is 8.5 x 11.
z“Auto” cannot be selected in color mode.
zIf the orientation of the original is different from the form, the original is copied by automatically rotating when 
overlaid.
zIf enlargement or reduction is selected using “Zoom” or the paper size setting, the size of the original is 
enlarged or reduced according to the setting. However, the size of the form...

82
 Chapter 2    More Menus Features
5Select the registered form, and then 
select “OK”.
zFor the details about how to register the 
form, refer to the Save (see page 83).
zWhen Hard Disk Drive is not installed, the 
screen of step 5 is not displayed.
(Hard Disk Drive has been equipped 
normally with DP-C354/C264. It is optional 
equipment for DP-C323/C263/C213.)
6Set the order of overlay form, and the 
scanned original, and then select 
“OK”.
7Enter the desired number of copies.
8Press the Start key....

83
 Chapter 2    More Menus Features
File Edit
Up to 12 editing functions are available in the Form Overlay Feature.
zRefer to the Overlay Copying with Registered Image (see page 81)
zIf Hard Disk Drive is installed, an image can be stored.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
„Save
zIf no optional hard disk drive is installed, only 1 form can be registered, and the title cannot be entered. When 
the power is turned OFF, the form...

84
 Chapter 2    More Menus Features
6Select “Save”, and then select “OK”.
7Select the specified colors of the form 
from basic/custom, and then select 
“OK”.
‰When selecting from the basic colors
‰When selecting from the registered 
custom colors
zIf “Add Custom” is selected, Add Custom 
screen is displayed, and colors can be 
registered as New Color Registration (see 
page 14)
8Adjust the overlay level with “Lighter” 
and “Darker”, and then select “OK”.
zIf cancel to save the overlay form, select...

85
 Chapter 2    More Menus Features
11Input the file name, and then select 
“OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
zAfter completing the editing of the file name, 
press the Reset key to return to the initial 
screen of the current active mode. 

86
 Chapter 2    More Menus Features
„Erase
1Select the file name to be deleted.
zTo display File Edit screen, refer to steps 2 
to 4 in Save (see page 83).
2Select “Erase”, and then “OK”.
3Select “Ye s”.
zAfter completing the deletion of the form, 
press the Reset key to cancel the settings.
„File Name Edit
1Select the file name to be edited.
zTo display File Edit screen, refer to steps 2 
to 4 in Save (see page 83).
2Select “File Name Edit”, and then 
“OK”.
3Change the file name, and then select 
“...

87
 Chapter 2    More Menus Features
Memo 

88
 Chapter 3    Other Features
Chapter 3
Other Features
Making Copies with the ADF Opened
The original can be copied without generating dark borders even if the ADF is opened.
Skyshot Mode
Skyshot Mode can be selected in the standard settings.
zWhen “2 Page” or “N in 1” is selected, only “Normal” can be set in Skyshot Mode.
zIf there is a white margin, less than 5 mm around the original, the edge of the copy may come out abnormal 
(white lines/streaks). To avoid the problem, change the setting of...

89
 Chapter 3    Other Features
Manual Skyshot Mode
Copying with pre-registered scan size into memory.
zBefore using the Manual Skyshot Mode, please set M1 or M2 in the preset jobs. Refer to the Copier Settings 
in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
zOriginals with black borders may not be copied properly.
zIf Manual Skyshot Mode is selected in “Sort”, “Shift-Sort”, “Rotate-Sort” or “Staple-Sort”, the setting is 
automatically changed to “Non Sort”.
1Open the...

90
 Chapter 3    Other Features
Reser ving the Next Copy Job While the 
Current Copy Job is Progressing
The next copy job can be reserved while the current copy job is under way.
If Hard Disk Drive is not installed, this function is not available.
(Hard Disk Drive has been equipped normally with DP-C354/C264. It is optional equipment for DP-C323/C263/
C213.)
1Place the next original while copying 
current job.
2Select “Reserve a Job”.
3Select copy features if necessary.
4Enter the desired number of...