Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

41
 Chapter 2    More Menus Features
Copying 2-Sided original(s) Onto two separate sheets
2-Sided original(s) can be copied, and separated into 1-Sided pages.
1Select “2-Sided / Original->Copy”, 
and then select “2 -> 1”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 40).
2Select the bind position, and then 
select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 40).
Long Edge:...

42
 Chapter 2    More Menus Features
Copying Facing Page Original to Two Separate Sheets
Two facing pages or a 11 x 17 size original can be copied, and separated into 1-Sided sheets.
1Select “2-Sided / Original->Copy”, 
and then select “2 Page”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 40).
zWhen “Multi-Size Feed” is selected, “2 
Page” cannot be selected.
2Select a page order of original.
3Select a copy layout, and then select 
“OK”.
zFor...

43
 Chapter 2    More Menus Features
From 1-Sided Originals to 2-Sided Copies using Saddle Stitch 
(Booklet)
zThe 2-Sided original cannot be copied into a booklet.
zOriginals should be placed on the ADF. (5.5 x 8.5 or 8.5 x 11 size is only available, up to 40 originals)
zSaddle stitch binding is possible only when the optional 1-Bin Saddle Finisher (DA-FS325) is installed.
Ledger (11 x 17), and Letter-R (8.5 x 11) are the only applicable paper sizes.
zThe standard setting for the copy size is the reduced...

44
 Chapter 2    More Menus Features
2Select a cover type.
zWhen “Blank” is selected as the cover type, 
up to 36 originals can be placed on the ADF.
3Select “Cover” to select a paper.
zWhen changing paper other than the cover, 
press the Copy key on the Control Panel. If 
the paper of desired size is available on the 
tray, the display changes.
Select a paper size from the display.
4Select “OK” to exit the cover settings.
5Select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic...

45
 Chapter 2    More Menus Features
Copying Mixed Size Originals from the ADF
Use this function when copying mixed size originals (8.5 x 11 and 11 x 17, or 8.5 x 11 and Legal) 
using with the ADF, original size can be detected automatically then can be copied to the same size, or 
one specified size.
zWhen copying in 2-Sided mode.
zIf no copy size is specified, the original is copied to its original size. If the copy size is specified, the original is 
copied automatically enlarged, or reduced in...

46
 Chapter 2    More Menus Features
3When copying the same paper size, 
touch “Basic Menu”, and then select a 
desired copy size with copy size 
button.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 40).
When all originals are 
vertically long 
Ex:
When the smaller original is 
vertically long, and the 
larger original is horizontally 
long
Ex:
When the smaller original is 
horizontally long, and the 
larger original is vertically 
long
Ex:...

47
 Chapter 2    More Menus Features
Copying Special Originals (Thin Paper, etc.) from the ADF
„SADF
This mode adds a 5 second delay to allow another original to be placed on the ADF. Special originals 
(like thin paper, etc.) can be fed from the ADF, and copied continuously using the SADF Mode. 
1Place one original (minimum 50 g/m2) 
on the ADF. 
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “2-Sided / Original->Copy”, 
and then select “Job Build and...

48
 Chapter 2    More Menus Features
„Job Build
This is useful, when copying multiple sets of originals that exceed the maximum capacity of the ADF of 
85 sheets (20 lb). (See the Example below)
Ex: To make 5 sets of sorted copies of 100-sheet of originals.
(a) Place the first 85 sheets of originals on the ADF.
(b) Select “2-Sided / Original->Copy” Copy menu, and select Job “Job Build and SADF”.
(c) Select “Sort / Finish” menu, and select the desired Sorting/Finishing end result.
(d) Press the Start...

49
 Chapter 2    More Menus Features
Memo 

50
 Chapter 2    More Menus Features
Sort Mode
The original can be copied, printed, and sorted in a specified number of sets.
• Optional Finisher is not installed. 
Refer to the Operating Instructions (For Basic Functions).
• Optional Finisher is installed. 
Shift-Sort, Shift-Group and Staple mode are available.
• Optional Punch Unit is installed
Punch mode is available.
zThe maximum number of pages to staple are as follows:
For 1-Bin Finisher
8.5 x 11: 30 sheets, Legal / 11 x 17: 20 sheets
For 1-Bin...