Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

71
 Chapter 2    More Menus Features
Image Repeat
Create multiple images on the sheet from single original.
zYou can change to have dotted lines printed between each copy images. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by 
ambient light.
zIf the margin...

72
 Chapter 2    More Menus Features
Insertion Modes
Add a Cover Page to Copies
The original can be copied using other types of paper as a Cover Page. Only the Front Cover, or Front 
and Back Covers can be selected.
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Cover”.
The...

73
 Chapter 2    More Menus Features
5Determine whether to copy the Front/
Back cover.
6Select “Cover” until the paper tray to 
be used is displayed.
zWhen changing paper other than the cover 
page, press the Copy key, and change the 
paper tray.
zWhen using color paper for copying the 
cover page, place the paper in the Sheet 
Bypass beforehand and also select the type 
of paper that you will be using. If the type of 
paper is not selected properly, the quality of 
the image may become poor. Refer to...

74
 Chapter 2    More Menus Features
Inserts Blank/Copied Pages Between Copies
The original can be copied by inserting other types of paper between specified pages.
You can copy specified pages (including the cover page) on paper such as colored paper set in a 
Paper Tray, or on the Sheet Bypass.
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode....

75
 Chapter 2    More Menus Features
7Select “OK”.
8Input the page numbers with keypad 
where the insertion pages are placed.
9Select   to enter the following 
page numbers where the insertion 
pages are placed.
zBy selecting   and  , move 
cursor to enter the insertion page numbers.
zUp to 20 insertion page numbers can be 
entered.
10Select “OK”.
11Enter the desired number of copies.
12Press the Start key.
zAfter finishing copying, press the Reset key 
to return to the initial screen of the current...

76
 Chapter 2    More Menus Features
Inserts Blank Pages Between Transparency Film
1Place original(s) on the ADF.
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Place the Transparency Film on the 
Sheet Bypass.
zHow to using Sheet Bypass and changing 
the Printing Media, refer to Adding Paper 
 in the Operating 
Instructions (For Basic Operations) of...

77
 Chapter 2    More Menus Features
Memo 

78
 Chapter 2    More Menus Features
Overlay Modes
Overlaying an Image Onto the Copies
The original can be overlaid with the first page of the original.
The first page is called the overlay original, and the second page onwards are called the scanned 
original, respectively.
zThe size available for both of the overlay original, and the scanned original is 8.5 x 11.
z“Auto” cannot be selected in color mode.
zWhen “Margin” is selected, a binding margin is also set for the overlay original.
zWhen “Cover” or...

79
 Chapter 2    More Menus Features
5Select the color of the overlay original 
from the basic colors, and registered 
custom colors, and then select “OK”.
‰When selecting from the basic colors
‰When selecting from the registered 
custom colors
zIf “Add Custom” is selected, Change Color 
Add Custom screen is displayed, and colors 
can be registered. Refer to the New Color 
Registration (see page 14)
6Adjust the overlay density with “Lighter”, 
and “
Darker”, and then select “OK”.
7Select the overlay...

80
 Chapter 2    More Menus Features
11Determine where to register the 
overlay original.
12Select a desired button has no names 
registered, and then select “OK”.
13Input the button name with Keyboard, 
and then select “OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on provided CD-ROM.