Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

61
 Chapter 2    More Menus Features
Copying with Stamping
Page Numbers, Date, etc. can be stamped on each sheet.
zThis function can be selected when the original is placed on the ADF.
zOnly 1 of the page number, date, control number and characters can be selected to print in 1 scanning. 2 or 
more stamps cannot be stamped.
zStamped only in black.
zNo stamp is printed on a blank page when an odd number of originals is copied with “1 -> 2” setting selected.
„Basic Operation for Stamping
1Place original(s)...

62
 Chapter 2    More Menus Features
„Page Number
The original can be copied with page numbers printed.
zThe default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in 
the Operating Instructions (For Function Parameters) on the provided CD-ROM.
zMake sure to select “Sort”.
1Select “Page Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position....

63
 Chapter 2    More Menus Features
5If “Change” was selected in step 4, 
select the starting page or number.
6Only the case of selecting “Change” in 
step 4, input the starting page number 
with “S” and “T”, or the keypad, and 
then select “OK”.
zStarting page number can be set from1 to 
999.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61).
7Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page...

64
 Chapter 2    More Menus Features
„Issue Number
The original can be copied, and printed in consecutive numbers from 001 to 999.
zThe issue numbers can be set from 001 to 999. After 999, the number returns to 001.
1Select “Issue Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of issue 
number.
Select the orientation of the 
original according to the 
orientation of its...

65
 Chapter 2    More Menus Features
4Input the starting number of the issue 
number with “S” and “T”, or the 
keypad, and then select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61).
Each time it is selected, the number 
increments by 1.
Each time it is selected, the number 
declines by 1. 

66
 Chapter 2    More Menus Features
„Date
The original can be copied with a printed date. The date is printed in MM/DD/YYYY format.
1Select “Date”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of the 
date stamp.
4To change the date, follow the steps 
below.
1Select “Change”.
The cursor is displayed.
08/01/2006 08/01/2006
Select the orientation of the 
original according to the...

67
 Chapter 2    More Menus Features
2Move the cursor to the desired position using 
 and  .
3Update the date with the Keypad.
5Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61). 

68
 Chapter 2    More Menus Features
„Text Stamp
The original can be copied with printed text.
zUp to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed.
zThe font size is 2.1 mm x 3.1 mm.
1Select “Text Stamp”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
61).
2Select the orientation of the original.
3Select the stamping position of the text 
stamp.
4Select “Change”.
Select the orientation of the 
original...

69
 Chapter 2    More Menus Features
5Input text, and then select “OK”.
zUp to 32 characters.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
6Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 61). 

70
 Chapter 2    More Menus Features
Centering
The copying image can be centered automatically on selected paper.
zThis function can be selected when the original is placed on the platen.
zAs the original is placed on the platen, the position of the original may be erroneously detected if influenced by 
ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and then place...