Panasonic Digital Color Imaging Systems For Copier Dp C354 Operating Instructions

31
 Chapter 1    Basic Menu Features
Memo 

32
 Chapter 1    Basic Menu Features
Proof Copying
When making more than one copy, the first copy can be printed as a proof copy.
After confirming its quality, the remaining copies can be printed.
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if the machine is 
set to other function mode.
3Select the copy features if necessary.
4Enter the desired number of copies.
5Select “Proof Set”.
6Press the Start...

33
 Chapter 1    Basic Menu Features
Confirming/Editing the Selected Copy 
Features
Before copying, the settings can be checked, changed or deleted.
1Select “Confirm Settings”.
2Check the settings, and then select 
“Close”.
zIf “Confirm Settings” is selected, the setting 
screen is displayed, and the settings (except 
1 -> 1) can be changed.
zIf “Reset All” is selected, all the settings are 
cancelled.
zIf “Preset Jobs” is selected, the job 
registration screen is displayed to register 
jobs. Refer to...

34
 Chapter 1    Basic Menu Features
Storing a Job in Memor y
A copy job can be registered as a preset job. It is useful to register the frequently used settings as 
Preset jobs.
zRefer to the Recalling a Preset Job Stored in Memory (see page 35).
zOnce registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
zA proof copy job cannot be registered in the job memory. 
z“M1”/”M2” cannot be registered when Manual Skyshot Mode is selected. Refer to Copier...

35
 Chapter 1    Basic Menu Features
Recalling a Preset Job Stored in Memor y
The specific copy job will be done by recalling the registered preset jobs.
A job called “Double Exposure” is set as default.
Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.
zRefer to the Storing a Job in Memory (see page 34).
1Place original(s).
zRefer to Placing Originals (Copy) in the 
Operating Instructions (For Basic 
Operations) of provided booklet.
2Press the Copy key if...

36
 Chapter 1    Basic Menu Features
Checking the Waiting to Copy Job
A list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can 
be displayed.
•All jobs
• Copy jobs
The pending waiting to print jobs can be deleted.
Displaying a List of All Jobs
A list of all the jobs currently being printed, or 
waiting to print can be displayed.
1Press the Copy key if the machine is 
set to other function mode.
2Select “Output Queue”.
Output Queue screen is displayed,...

37
 Chapter 1    Basic Menu Features
Deleting Copy Jobs
The jobs in Ready status can be deleted.
1Select “Copy” in the Output Queue 
screen.
zTo display the Output Queue screen, refer to 
the Checking the Waiting to Copy Job 
(see page 36).
2Select a job, and then select “Delete”.
zWhen deleting all the jobs, select “Select 
All”, and then select “Delete”.
The screen to confirm the job deletion is 
displayed.
3Select “Ye s”.
Selected Copy Job is deleted.
4Select “Close”.
CopySelect when deleting a copy...

38
 Chapter 1    Basic Menu Features
Completion Notice
If Completion Notice is set, you will be notified on your computer when copying is completed.
zBefore using this function, install the Panasonic Document Management System and PCL Printer Driver, 
and then configure each software.
zTo register the IP Address of your computer, refer to Network Scanner Settings (Option) and Completion 
Notice in the Operating Instructions (For Setting Up) of provided booklet.
1Place original(s).
zRefer to Placing...

39
 Chapter 1    Basic Menu Features
Memo 

40
 Chapter 2    More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
zFor information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, please refer to the Operating Instructions (For 
Basic Operations) on the provided booklet.
zThe standard setting of the 2-Sided / Original->Copy can be changed. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) on the provided CD-ROM.
zSpecial paper such as cardboard cannot be used for 2-Sided copy.
Basic Operation for the...