Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features

							- 171 -
Others
•Upload may not complete when it is disconnected while transmitting the image.•It may take some time after uploading the image to be reflected in the WEB service depending on 
the status of the server.> Wait for a while and try again.
•Transmission status can be checked in WEB destination settings by logging into the “LUMIX CLUB”.
•The images in the WEB Service cannot be saved (downloaded) to this unit. Do not delete the 
uploaded images, and make a backup of them.
• The images uploaded to the WEB service cannot be displayed or deleted by this unit.
> Perform the task using a smartphone or a PC.
•The settings stored in the camera may be deleted depending on the type of repair.
> Always make a copy of important settings.
•Is the size of the image too large?
> Divide the motion picture using [Video Divide]  (P97).
> Reduce the size of the still picture at [Size] in [Send Image] or [Size] in [Smart Transfer], then 
transmit  (P118, 123) .
•Capacity or number of images in the WEB service is full.
> Login to the “LUMIX CLUB”, and check the status of the destination by WEB destination settings.
> Execute the [Reset Wi-Fi Settings] in the [Setup] menu.  (P48)
> However, all the information set with the [Wi-Fi  Setup] menu, such as the wireless access point, 
login setting of the “LUMIX CLUB”, etc., will also be reset.
• Is the size of the image too large?
> Reduce the size of the still picture at [Size] in [Send Image] or [Size] in [Smart Transfer], then 
transmit  (P118, 123) .
> Transmit after dividing the motion picture with [Video Divide]  (P97).
> Image cannot be transmitted when the battery indicator is flashing red.
•Only the motion pictures recorded in [MP4] can be transmitted.• Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide]  (P97).
The image that was supposed to have uploaded to the WEB service is not there.
I would like to return the image in the WEB service to the camera.
I cannot display or delete the images uploaded to the WEB service by this unit.
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in 
to be repaired.
There is an image that could not be transmitted.
I have forgotten the password for the Wi-Fi.
Transmission of the image fails midway.
Motion picture cannot be transmitted. 
						

							- 172 -
Others
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Depending on the TV model, the pictures may be elong ated horizontally or vertically or they may be 
displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the 
TV? > Connect the camera to the TV with the AV cable (optional) and then play back the pictures on 
the camera. (P137)
> Check [TV Aspect] setting.  (P48)
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?
> Select [PC] when connecting.  (P140)
> Turn this unit off and on.
> Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection cable 
to another USB terminal.
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s LCD monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
Cannot communicate with the PC.
The card is not recognized by the PC. (The built-in memory is recognized.) 
						

							- 173 -
Others
>Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not format.
> If the [Access] displayed on the LCD monito r does not disappear, disconnect the USB 
connection cable after turning this unit off.
> Confirm that the login information (login ID/User name/email address/password) is correct.
> Confirm that the PC is connected to the Internet.
> Confirm that resident software such as virus protection software or firewall is not blocking access 
to YouTube or Facebook.
> Confirm with YouTube or Facebook as well.
•Pictures cannot be printed using a printer that does not support PictBridge.
> Select [PictBridge(PTP)] when connecting.  (P146)
> When using a printer with a Cropping or borderless printing function, cancel this function before 
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures,  ask the photo studio if the 16:9 pictures can be 
printed.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly.  > Please use a printer that supports panorama pictures. (For details, refer to the operating 
instructions for the printer.)
> We recommend using the “ PHOTOfunSTUDIO ” software on the CD-ROM (supplied) to adjust 
the size of the still picture to the print paper size.
The card is not recognized by the PC. (SDXC memory card is used)
There is a problem trying to upload to YouTube or Facebook.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly. 
						

							- 174 -
Others
>Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then 
select the [ ~] icon to set the desired language.  (P49)
•In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]?  (P82)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance or 
quality of the camera.
•When the brightness changes due to zoom or camera movement, etc., the lens may click and the 
picture on the screen may drastically change. However, the picture is not affected. The sound is 
caused by the automatic adjustment of the aperture. This is not a malfunction.
•If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.  (P23)
•It is possible that the subject may be warped slightly, or the borders get colored, depending on the 
zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
•When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a 
malfunction.
•Is the camera set to Macro Zoom Mode? (P59)
Maximum zoom during Macro Zoom Mode is 3 k digital zoom.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.
When pictures are taken using the zoom, they are slightly distorted and the areas 
around the subject contain colors which are not actually present.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification. 
						

							- 175 -
Others
•When you perform an operation after taking a certain action, the pictures may be recorded in folders 
with different numbers from the ones used prior to the operation.
•If you insert or remove the battery before turning off this unit, the folder and file numbers for the 
pictures taken will not be stored in the memory. When this unit is turned on again and pictures are 
taken, they may be stored under file numbers which should have been assigned to previous 
pictures.
•This is the [Auto Demo] which introduces the features of the camera. Press a button to return the 
camera to the original screen.
The file numbers are not recorded consecutively.
The file numbers are recorded with previously used numbers.
When the camera is left alone, the Slide Show is suddenly displayed. 
						

							- 176 -
Others
•SDXC Logo is a trademark of SD-3C, LLC.
•QuickTime and the QuickTime logo are trademarks or registered trademarks of 
Apple Inc., used under license therefrom.
•Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other 
countries.
•App Store is a service mark of Apple Inc.•Windows and Windows Vista are  either registered trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.
•Android and Google Play are trademarks or r egistered trademarks of Google Inc.•YouTube is a trademark of Google Inc.
•Facebook® is a trademark of Facebook, Inc.•The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
•The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.•“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi 
Alliance.
•DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification 
marks of the Digital Living Network Alliance.
•This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered 
trademark of DynaComware Taiwan Inc.
•Other names of systems and products mentioned in these instructions are usually the registered 
trademarks or trademarks of the manufacturers  who developed the system or product concerned.
This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC 
Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and 
non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. 
No license is granted or shall be implied for any  other use. Additional information may be obtained 
from MPEG LA, LLC. See http://www.mpegla.com
 . 
						

							- 177 -
Others
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation and/or,
(3) open sourced software including the software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/
), and the software written by Eric Young 
([email protected]).
This product contains OpenSSL software developed by the OpenSSL Project, and can be used under 
the following licencing conditions.
LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and 
the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both 
licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL 
please contact [email protected].
OpenSSL License
Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and  the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgment:
This product includes software developed by the OpenSSL Project for use in the OpenSSL 
Toolkit. (http://www.openssl.org/)
4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote  products derived from this software without prior written permission. For written permission, 
please contact [email protected].
5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in 
their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL 
Toolkit (http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
						

							- 178 -
Others
This product includes cryptographic software written by Eric Young ([email protected]). This 
product includes software written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are 
adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, 
lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution 
is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the author of 
the parts of the library used. This can be in the form of a textual message at program startup or in 
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the  following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgement:
This product includes cryptographic software  written by Eric Young ([email protected])
The word cryptographic can be left out if the routines from the library being used are not 
cryptographic related :-).
4. If you include any Windows specific code (or  a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement:
This product includes software written by Tim Hudson ([email protected])
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publically available version or derivative of this code cannot 
be changed. i.e. this code cannot simply be copied and put under another distribution license 
[including the GNU Public License.] 
						

							- 179 -
Others
This product contains encryption software developed by Eric Young, and can be used under the 
following licencing conditions.
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are 
adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, 
lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution 
is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the author of 
the parts of the library used. This can be in the form of a textual message at program startup or in 
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the  following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgement:
This product includes cryptographic software  written by Eric Young ([email protected])
The word cryptographic can be left out if the routines from the library being used are not 
cryptographic related :-).
4. If you include any Windows specific code (or  a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement:
This product includes software written by Tim Hudson ([email protected])
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publically available version or derivative of this code cannot 
be changed. i.e. this code cannot simply be copied and put under another distribution license 
[including the GNU Public License.] 
						

							- 180 -
Others
This product contains NetBSD software, and can be used under the following licencing conditions.
Copyright (c) 1990 The Regents of the University of California. All rights reserved.
This code is derived from software contributed to Berkeley by Chris Torek.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. Neither the name of the University nor the names of its contributors may be used to endorse or  promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.