Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features

							- 101 -
Playback/Editing
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to 
print, how many copies of each picture to print and whether or not to print the recording date on 
the pictures when using a DPOF compatible photo printer or photo printing store. For details, 
ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in memory, 
copy them to a card  (P104) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
1Select [Print Set] on the [Playback] menu.  (P41)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
4Press 3/4 to set the number of prints, and then press [MENU/SET] to 
set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to 
use the same setting for a multiple number of pictures.)
•Exit the menu after it is set.
∫ Canceling all the [Print Set] settings1Select [Print Set] on the [Playback] menu.
2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
[Print Set]
3Select the picture, and then press 
[MENU/SET].[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4 /2 /1  
to select the 
pictures.
1
DWH
&RXQW146
2
31
51
DWH
&RXQW1 
						

							- 102 -
Playback/Editing
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISP.].
•
Depending on the photo printing store or the printer,  the date may not be printed even if you set to 
print the date. For further information, ask at your photo printing store or refer to the operating 
instructions for the printer.
•The date cannot be printed on pictures with date or text stamped.
Note
•The number of prints can be set from 0 to 999.
•Depending on the printer, the date print settings of the printer may take precedence so check if this 
is the case.
•It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
•[Print Set] cannot be set for motion pictures.
•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							- 103 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
1Select [Protect] on the [Playback] menu. (P41)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
∫Canceling all the [Protect] settings1Select [Protect] on the [Playback] menu.
2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.
•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect 
switch is set to [LOCK].
[Protect]
3Select the picture, and then press 
[MENU/SET].
•The settings are canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4 /2 /1  
to select the 
pictures.
46
2
31
5 
						

							- 104 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or from 
a card to the built-in memory.
1Select [Copy] on the [Playback] menu. (P41)
2Press 3/4 to select the copy destination and then press 
[MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
Note
•If a picture exists with the same name (folder number/file number) as the picture to be copied in the 
copy destination when [ ] is selected, a new folder is created and the picture is copied. If a 
picture exists with the same name (folder number/file number) as the picture to be copied in the copy 
destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after copying 
is finished.
[Copy]
[] ([IN>SD]): All the picture data in the built-in memory are copied onto the card 
at one time.
[] ([SD>IN]): One picture at a time is copied from the card to the built-in memory.
Press  2/1  to select the picture and then press [MENU/SET]. 
						

							- 105 -
Wi-Fi
What you can do with the Wi-FiR function
You can wirelessly connect this unit to Wi-Fi-compatible devices.
•Connect a PC, an AV device, etc., to a wireless access point in advance.
By using this unit’s wireless LAN communication function, you can perform the following operations.
FeatureDescription of functions
[Smart Transfer]
  (P122)
Transfer recorded images to a PC, an AV device or a Cloud Folder automatically.
[Remote Control]
 (P109)
By connecting the camera to a smartphone via the smartphone 
application “LUMIX LINK”, you can cont rol the camera remotely from the 
operation panel displayed on the smartphone. Moreover, you can send 
images in the camera to other devices or WEB services.
•
In addition to the above, location information acquired on the smartphone can 
be written to images taken on the camera or camera menus can be set up on 
the smartphone.
•Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. 
of the subject when you use this function. Use at your own risk.
[Send Image]
  (P117)
You can send selected images to a PC, an AV device, or a Cloud Folder, 
or upload them on SNS (Social Networ king Service) by using services on 
the WEB.
[Wireless TV 
Playback]
  (P120)You can display recorded pictures on a DLNA-compatible TV.
[Wireless Print]
 (P121) You can print out recorded pictures wirelessly from a PictBridge (wireless 
LAN-compatible)
¢ printer.
¢ Compliant with the DPS over IP standards. 
						

							- 106 -
Wi-Fi
∫About the Wi-Fi connection lamp
A Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi 
connection 
						

							- 107 -
Wi-Fi
Wi-Fi function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless 
LAN devices, ensure that the appr opriate measures are taken for safety designs and defects 
for the systems used. Panasonic will not take any  responsibility for any damage that arises 
when using the camera for any purpos e other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this camera is presumed to be in the following countries
(DMC-SZ5P)
The United States
(DMC-SZ5PC)
Canada
(DMC-SZ5PU)
Mexico, Panama, Colombia, Chile, Peru 
(DMC-SZ5PB)
Brazil
There is the risk that the camera violates the  radiowave regulations if used in other countries, 
and Panasonic takes no responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as near 
microwave ovens. Radio waves may not reach the camera.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function,  wireless networks will be searched automatically. 
When this happens, wireless networks that  you are not authorized to use (SSID
¢) may be 
displayed, however do not attempt to connect to  the network as it may be considered as 
unauthorized access.
¢ SSID refers to the name that is used to identi fy a network over a wireless LAN connection. If the 
SSID matches for both devices, transmission is possible.
Note
•The camera cannot be used to connect to a public wireless LAN connection.•A wireless access point is required to connected from home.•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point.
•When using a wireless access point, we strongly recommend that you set a encryption to maintain 
information security.
•The Wi-Fi transmitter may become warm when using the Wi-Fi function; however this is not a sign of 
a malfunction.
•When sending images with the Wi-Fi function, do not cover the Wi-Fi transmitter with your hand. The 
camera may have difficulty sending images. 
						

							- 108 -
Wi-Fi
Setting up the connection with [Wi-Fi Wizard]
By a single operation, you can make all the settings required for using the Wi-Fi functions.
•If you are using this unit for the first time following the purchase, the Wi-Fi setting screen is displayed 
after the clock setting.  (P23)
•You can also start the Wi-Fi wizard by selecting [Wi-Fi Wizard] in the [Wi-Fi Setup] menu.  (P125)
Proceed with the setting by following the on-screen instructions.
•Set in the following order.
•Exit the menu after the setting.
Note
•Functions that have not been set up for a Wi-Fi connection can also be set by selecting the 
respective function in the [Wi-Fi] menu.
FunctionsDescription of settings
[Smart Transfer]
  (P122)
1Connect to a wireless access point.
•Refer to “[Access Point]” on  P125 for the connection method.
2Set the destination.
•If you have selected [PC], create a folder used for receiving the data on 
the PC in advance. Refer to  P113 for details.
•When [Cloud Sync. Service] is selected, “LUMIX CLUB” registration is 
required. Refer to “[LUMIX CLUB]” on P129 .
[Remote Control]
  (P109)
Connect to the smartphone.
•In [Wi-Fi Wizard], you can directly connect this unit and the smartphone by 
using this unit as a wireless access point.
•Refer to  P110 for details on connection method.
[Send Image]
  (P117)
1Connect to a wireless access point.
•Refer to “[Access Point]” on  P125 for the connection method.
2Set the destination.
•If you have selected [PC], create a folder used for receiving the data on 
the PC in advance. Refer to  P113 for details.
•When [Cloud Sync. Service], [WEB service] or [External] in [AV device] 
is selected, “LUMIX CLUB” registration is required. Refer to 
“[LUMIX 
CLUB]” on  P129 .•Refer to P115  when using WEB services.
•For the settings for [External] in [AV device], refer to “[External AV 
device]” on  P133 .
[Wireless TV 
Playback]
  (P120)
1Connect to a wireless access point.
•Refer to “[Access Point]” on  P125 for the connection method.
2Set the destination.
[Wireless Print]
 (P121)1Connect to a wireless access point.
•Refer to “[Access Point]” on  P125 for the connection method.
2Set the destination. 
						

							- 109 -
Wi-Fi
Smartphone operations
•The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet. 
Follow the on-screen instruction to configure.
Preparation:
Install the smartphone app “LUMIX LINK” on your smartphone.
∫About the smartphone application “LUMIX LINK”
The “LUMIX LINK” is an application provided by  Panasonic that allows your smartphone to 
perform the following operations of a Wi-Fi-compatible LUMIX.
•
Record/Play back pictures by controlling a Wi-Fi-compatible LUMIX on a smartphone screen.
•Send images stored in a Wi-Fi-compatible LUMIX to other devices or WEB services.•Sending the location information acquired by the smartphone to this unit.
•The service may not be able to be used properly depending on the type of smartphone being used. 
For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)•When downloading the app on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
1Select [Remote Control] in the [Wi-Fi] menu.  (P41)
•You can also press and hold the [Wi-Fi] to perform this step whether the camera is turned on 
or off.
•The screen that notifies the camera is waiting to get connected with a smartphone is 
displayed.
•Confirm that the connection destination of the smartphone is set to this unit.
2Start up “LUMIX LINK” on your smartphone.
•When the connection is complete, images stored in this unit is displayed on the smartphone 
screen.
For AndroidTM appsFor iOS apps
Version 2 (As of August 2012)
OS Android 2.2 ~ Android 4.0 iOS 4.3~ iOS 5.1
Installation 
procedure
1Connect your Android device to 
a network.
2Select “Google PlayTM Store”.3Enter “LUMIX LINK” into the 
search box.
4Select “LUMIX LINK” and install 
it.
•
The icon will be added to the 
menu.
1Connect the iPhone to the 
network.
2Select “App StoreSM”.3Enter “LUMIX LINK” into the 
search box.
4Select “LUMIX LINK” and install 
it.
•
The icon will be added to the 
menu. 
						

							- 110 -
Wi-Fi
1Select [Remote Control] in the [Wi-Fi] menu.2In the standing by for connection to smartphone screen, press [DISP.].3Press 3/4  to select the item, and press [MENU/SET].
∫ Connection method when [Work as Access Point] is selected
∫ Connection method when [Connect to access point] is selected
Press  3/4  to select a name of registered wireless access point or [New Access Point], 
and press [MENU/SET].
•
When you select [New Access Point], a new ac cess point will be registered to this unit.
Change the destination
ItemDescription of settings
[Work as Access 
Point] Directly connect to the smartphone by using this unit as a wireless 
access point.
[Connect to access 
point] Connect this unit to a smartphone via a wireless access point.
Connection methodDescription of settings
[WPS (Push-Button)]
1In the standing by for connection to smartphone screen, press 3.
2Press  3/4 to select [WPS (Push-Button)] and then press 
[MENU/SET].
3Set the smartphone to WPS mode.
•Press [DISP.] to extend the connection waiting state.
[WPS (PIN)]
1In the standing by for connection to smartphone screen, press 3.2Press  3/4 to select [WPS (PIN)] and then press [MENU/SET].3Enter the smartphone PIN code into this unit.
Connecting by 
manual inputEnter the SSID and password of this unit that are displayed on the 
waiting-screen for a connection with a smartphone.