Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features

							- 121 -
Wi-Fi
To print pictures wirelessly
•The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet. 
Follow the on-screen instruction to configure.
•See the following website for information on the PictBridge (wireless LAN-compatible) 
printer.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)
Select [Wireless Print] in the [Wi-Fi] menu. (P41)
•If you have already set the connection destination, the confirmation screen is displayed. Select [Yes].•Press [ ] to quit [Wireless Print].
∫To print a single picture
Refer to “Selecting a single picture and printing it” on  P148 for details.
∫ To print multiple pictures
Refer to “Selecting multiple pictures and printing them” on  P148 for details.
∫ To change the connection destination
1Press [DISP.] on the destination confirmation screen.2Press  3/4  to select the item, and press [MENU/SET].
∫ To change the wireless access point
1Press [DISP.] on the destination confirmation screen.
2Press  3/4  to select [Change Access Point], and press [MENU/SET].3Press  3/4  to select a name of registered wireless access point or [New Access 
Point], and press [MENU/SET].
•
When you select [New Access Point], a new access point will be registered to this unit.
Note
•Motion pictures cannot be printed out. 
						

							- 122 -
Wi-Fi
To transfer images automatically
•The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet. 
Follow the on-screen instruction to configure.
Preparation:
Refer to “Preparation before sending images” on P113.
1Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)
2Press 3/4 to select [Auto Transfer], and press [MENU/SET].
3Press 3/4 to select [ON], and press [MENU/SET].
•Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.
4Turn off the camera.
5(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB 
connection cable (supplied/optional), and insert the AC adaptor 
(supplied) into the power outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (supplied/
optional).
•[Smart Transfer] starts automatically according to the [Charge Priority]   (P124) setting.•[Smart Transfer] is not available when the memory card is locked.
•Depending on the specifications of the PC, [Smart Transfer] may fail.
Note
•Except at the ambient temperatures between 0 oC and 40 oC, [Smart Transfer] may not work.•When [Destination] is set to [PC], images are saved in the folder you have created for receiving.  (P113)•If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that 
confirms whether to transfer these images is displayed. Select a desired option.
•When [Auto Transfer] is set to [ON], the camera automatically uploads recorded images. For this 
reason images may be uploaded unintentionally if, for example, you share this unit with other 
people. Panasonic assumes no responsibility for any damages caused by uploaded images.
•Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer]. 
						

							- 123 -
Wi-Fi
∫To transfer images instantly
1Connect the AC adaptor (supplied) to this unit by the USB connection cable 
(supplied).
•
Switch to Playback Mode.
2Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)3Press 3/4  to select [Transfer Now], and press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
∫ To change settings
1Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)2Press 3/4  to select [Set Destination], and press [MENU/SET].3Press  3/4  to select the item, and press [MENU/SET].
ItemDescription of settings
[Destination] Changes the destination.
[PC]/[Cloud Sync. Service]/[AV device]
[Size] Resizes the image to send.
[Original]/[Resize]
•You can select the picture size from [M] or [S] in [Resize]. The aspect ratio 
does not change.
[Delete Location 
Data]
¢
Select whether to delete the location information from images before 
transferring them.
[ON]: Delete the location information, then transfer.
[OFF]: Keep the location information and transfer.
•This operation only deletes the location information from the images that 
are set to be transferred. (The location information will not be deleted from 
the original images stored in this unit.)
[Cloud Limit]
¢
You can select whether to send images when the Cloud Folder runs out of 
free space.
[ON]: The camera does not transfer images.
[OFF]: Delete images from the oldest ones, then transfer new images.
[Exit] Exit the destination setting menu.
¢ Only available when [Destination] is set to [Cloud Sync. Service]. 
						

							- 124 -
Wi-Fi
∫To change the wireless access point
1Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)2Press 3/4  to select [Set Destination], and press [MENU/SET].3Press  3/4  to select [Destination], and press [MENU/SET].
4(When set to [PC] or [AV device])
Press  3/4  to select [Change Access Point], and press [MENU/SET].
(When set to [Cloud Sync. Service])
Select [Yes] on the screen that asks you to confirm the connection destination.
5Press  3/4  to select a name of registered wireless access point or [New Access 
Point], and press [MENU/SET].
•
When you select [New Access Point], a new access point will be registered to this unit.
∫ To switch the priority setting between charging and image transfers
1Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)2Press 3/4  to select [Charge Priority], and press [MENU/SET].3Press  3/4  to select the item, and press [MENU/SET].
•
Exit the menu after it is executed.
∫ To view the history of image transfers1Select [Smart Transfer] in the [Wi-Fi] menu.  (P41)
2Press 3/4  to select [Display Log], and press [MENU/SET].
•Dates and content of transferred images are displayed. Exit the menu when you are done 
viewing.
ItemDescription of settings
[ON] Give priority to charging. Transfer images after charging.
[OFF] Give priority to image transfers. 
						

							- 125 -
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
By a single operation, you can make all the settings required for using the Wi-Fi functions.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2Press 3/4 to select [Wi-Fi Wizard], and press [MENU/SET].
• Set up according to the on-screen instruction. Refer to  P108 for details.
Set up this unit to connect to the wireless access point.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu.  (P41)
2Press 3/4 to select [Access Point], and press [MENU/SET].
3Press 3/4 to select [Add], and press [MENU/SET].
4Press 3/4 to select the connection method, and press 
[MENU/SET].
[Wi-Fi Wizard]
[Access Point]
Connection methodDescription of settings
[WPS (Push-Button)] Save push button type wireless access point that is compatible 
with Wi-Fi Protected Setup
TM with a WPS mark.
[WPS (PIN)] Save PIN code type wireless access point that is compatible with 
Wi-Fi Protected Setup with a WPS mark.
[Manual Connection] Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if 
the network authentication is encrypted.
•When connecting by [Add wireless AP], confirm SSID, 
encryption type, encryption key of the wireless access point you 
are using. 
						

							- 126 -
Wi-Fi
Press the wireless access point WPS button until it switches to WPS Mode.
•A message is displayed when the wireless access point has been saved.•Refer to the wireless access point instruction manual for details.
1Press 3/4  to select the wireless access point you are connecting to, and press 
[MENU/SET].
2Enter the PIN code displayed on the camera screen into the wireless access point.3Press [MENU/SET].
•A message is displayed when the wireless access point has been saved.•Refer to the wireless access point instruction manual for details.
1Press  3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
•
Touching [DISP. ]  will search for a wireless access point again.•For details on how to connect with [Add wireless AP], refer to “When 
connecting with [Add wireless AP]
”.  (P127)
2(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to “Entering Text” section 
on  P71 .
•A message is displayed when the wireless access point has been 
saved.
When connecting with [WPS (Push-Button)]
When connecting with [WPS (PIN)]
When connecting with [Manual Connection] 
						

							- 127 -
Wi-Fi
∫When connecting with [Add wireless AP]1On the screen displayed in step 1 of “When connecting with [Manual Connection]” 
(P126) , select [Add wireless AP] by pressing  3/4 , then press [MENU/SET].
2Enter the SSID of the wireless access point you are connecting to, then select [Set].
•For details on how to enter characters, refer to “Entering Text” section on  P71.
3Press  3/4  to select the network authentication type, and press [MENU/SET].
•For information on network authentication, see the manual of the wireless access point.
4Press  3/4  to select the encryption type, and press [MENU/SET].
•The type of settings that can be changed may vary depending on the details of network 
authentication settings.
•[No Encryption] # A message is displayed when the wireless access point has been saved.
5(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
A message is displayed when the wireless access point has been saved.
Network authentication typeEncryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP] 
						

							- 128 -
Wi-Fi
∫Set the first wireless access point to connect to
When several wireless access points are saved, changing settings so the wireless access point
that is used most often is connected first adds convenience.
•
If the set wireless access point cannot be found, connections will be made in the order displayed on 
the screen.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu.  (P41)2Press 3/4  to select [Access Point], and press [MENU/SET].
3Press  3/4  to select [Set default], and press [MENU/
SET].
4Press  3/4  to select the wireless access point you want 
to set, and press [MENU/SET].
•
Close the menu after changing settings.
∫ Delete a saved wireless access point
1Select [Wi-Fi Setup] in the [Wi-Fi] menu.  (P41)2Press 3/4  to select [Access Point], and press [MENU/SET].3Press  3/4  to select [Delete], and press [MENU/SET].
4Select the wireless access point you want to delete, 
and press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
Note
•Up to 8 wireless access points can be saved.•Check the wireless access points instruction manu al and settings when a saving wireless access 
point.
•If no connection can be established, the wireless access point’s radio waves may be too weak. Refer 
to “Message Display”  (P159)  and “Troubleshooting” (P162)  for details.
•Transmission speed may decrease, or may not be usable depending on the environment it is used 
in. 
						

							- 129 -
Wi-Fi
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the devices 
you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures  to WEB services or external AV device.
•
You can set the same “LUMIX CLUB” login ID for this unit and a smartphone.  (P131)
1Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2Press 3/4 to select [LUMIX CLUB], and press [MENU/SET].
3Press 3/4 to select [Add/Change Account], and press 
[MENU/SET].
4Press 3/ 4 to select [New account], and press [MENU/
SET].
•Connect to the network. Proceed to the next page by pressing 
[MENU/SET].
•A confirmation screen will be displayed if a login ID has already been 
acquired for the camera. Select [Yes] to acquire  a new login ID, or [No] if you do not need to 
acquire a new login ID.
[LUMIX CLUB]
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/ 
						

							- 130 -
Wi-Fi
5Read through the “LUMIX CLUB” terms of use and 
press [MENU/SET].
•You can switch pages by 3/4.•Rotating the zoom lever towards T will enlarge the view (2 k).
•Rotating the zoom lever towards W with the view enlarged returns 
the view to its original size (1 k).
•When the zoom magnification is changed, the zoom position indication is displayed for about 
two seconds, and the position of the zoom area can be moved by  3/4/2/1.
•Press [ ] to cancel the process without acquiring a login ID.
6Enter a password and press [MENU/SET].
•Enter any combination of 8 to 16 characters and numbers for the password.•For details on how to enter characters, refer to “Entering Text” section on P71 .
7Check the login ID and press [MENU/SET].
•The login ID (12-digit number) will  be displayed automatically. When 
logging in to the “LUMIX CLUB” with a computer, you only need to 
enter the numbers.
•A message is displayed when the connection is complete. Press 
[MENU/SET].
•Be sure to make a note of the login ID and password.