Panasonic Digital Business System Section 300 Installation Guide

Section 700, Feature Operation Key Telephone Features 
Issue 1. July 6, 1993 CPC-6. Version 4 
/ 
: To check a programmed System Speed Dial key: 
1. Press the ON/OFF key. 
l You will hear intercom dial tone from the speaker. 
l The ON/OFF LED will light. 
2. Press the CONF key. 
“C” will appear in the display. 
3. Press AUTO. 
4. Dial the System Speed Dial key to be checked. 
The programmed data will appear on the display. 

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-6, Version 4 
Station Lockout 
(All Versions) 
Description 
The Station Lockout feature allows users to dial a Station Lockout code to restrict their 
phone from being used for outside calls. 
To activate Station Lockout: 
1. Press the ON/OFF key. 
l You will hear the intercom dial tone from the speaker. 
l The ON/OFF LED will light. 
2. Dial “74.” 
“Enter Code #T will appear on the display. 
3. Dial the Station Lockout...

Section 700, Feature Operation Key Telephone Features 
issue 1. July 6, 1993 CPC-6, Version 4 
Consideraiions 
- A locked extension can be used for Intercom Calls 
l Station Lockout key codes can only be set from an attendant phone or a 
programming phone. 
l You cannot confirm Speed Dialing or set Speed Dialing while Station 
Lockout is activated. 
l If you enter an incorrect key code and then try to dial, you will hear a busy 
tone. 
Trunk-to-Trunk Transfer 
(All Versions) 
Des&p tion 
Trunk-to-trunk...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-8, Version 4 
Inform the person at the other end that you are going to connect the two lines. 
5. Press the CONF key. 
l A three-party Conference Call will be initiated. 
l “Conf #HI1 #KU” will appear on the display if you are connected to lines 1 
and 2. 
6. Press one of the CO keys. 
l The two outside lines will be connected. 
l “Hold #I01 #KG” will appear on the display if lines 1 and 2 are connected. 
Related...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
‘$ Chapter 4. DSLT Features 
This chapter describes features that are 
available with the Digital Single Line 
Telephone (DSLT). 
Figure 6 illustrates the DSLT. For more information on DSLT operation, see the 
Digital SLT User’s Guide (Section 790). 
Note: The DSLT can only be 
used with CPC-B Version 3.1 or higher. 
Figure 6. Digital Single Line Telephone (DSLT) 
151  

Section 700, Feature Operation DSLT Features 
issue 1. July 6, 1993 CPC-B, Version 4 
Absence Message 
Description 
DSLT users can leave text messages on their phone when they are away. 
When the unattended extension is dialed by a key phone, the text message wi!i display 
on the caller’s phone. 
Any one of the following messages can be selected. Messages 5 to 9 can be changed 
through system programming. r 
Table 13. Absence Messages 
1 Message No. 1 Message Text 1 
0 ln Meeting 
1 At Lunch 
I 2 Out of...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
i x 
To Cancel an Absence Message 
1. Lift the handset or press ON/OFF. 
2. Dial “7 I.” 
3. Replace the handset or press ON/OFF- 
Related Programming 
l FFI (System) Extension Class of Service (CPC-B Version 3.1 or higher) 
l FF3 (Extension) Class of Service (CPC-B Version 3.1 or higher) 
l FF6 (Names and Messages): Absence Message 
Considerations 
l Calling parties without a display get a busy signal, rather than the...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Busy Override 
Description 
Extensions in the same Paging Group (l-7) can break into one another’s outside calls 
or Intercom Calls to relay urgent information or to create three-party Conference 
Calls. 
Operation 
1. Pick up the handset. 
You will hear intercom dial tone from the handset. 
2. Dial the extension number. 
3. When you hear busy tone, dial “4.” 
l An alert tone will sound to both phones (system...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B. Version 4 
Call Forwarding 
Call Forwarding allows users to send their calls to another extension, an outside line, 
or voice mail. The following call forwarding options are available. 
Call Forwarding-All Calls. When the Call Forwarding--All Calls feature is 
activated, all incoming calls to an extension are forwarded immediately. 
Call Forwarding-No Answer. When Call Forwarding--No Answer is activated, an 
unanswered call will...

Section 700, Feature Operation 
Issue 1. July 6, 1993 
Operation 
To activate Call Forwarding: 
1. Lift the handset or press ON/OFF. 
l You will hear intercom dial tone from the speaker. 
2. Dial “72.” 
3. Dial the appropriate call forwarding code. 
1 Call Forward Type 1 Code 1 
1 Outside 
I3 I 
DSLT Features 
CPC-B, Version 4 
c 
‘t 
No answer 4 
I 
4. 
If you’re forwarding to an internal number, enter the number of the extension 
you want to receive your calls. If you’re forwarding to an outside...