Panasonic Digital Business System Section 300 Installation Guide

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Camp-on 
Description 
If you reach a busy extension, the Camp-on feature will alert you with a ring when the 
extension becomes free. You will then be able to pick up your handset to automatically 
dial the extension. 
Operation 
To activate the Campon feature: 
1. Lift the handset. 
2. Dial the desired extension number. 
You will 
h&r a busy tone if the extension is busy. 
3. Press “3.” 
l You will hear ringback tone....

Section 700, Feature Operation DSLT Features 
Issue 1. July 6. 1993 C;PZ-B, Version 4 
Considerations 
l The callback ring must be answered within sixteen seconds or it will be 
canceled. 
l A Camp-on request wiil only be accepted after Call Waiting status. 
l Camp-on cannot be activated by an extension that has call forwarding 
turned on. 
l An extension can only have one call camped-on at a time. For example, if 
Extension 152 camps-on to Extension 153, another extension cannot camp- 
on to 153, as...

t 
-. 
..: 
.:.:. 
.::‘I 
Section 700, Feature Operation 
DSLT Features 
issue 1. July 6, 1993 
CPC-6, Version 4 
To add an outside number: 
1. Press the HOLD key to place the current call on hold. 
2. Dial a trunk group 
number (81 - 86 or 9). 
3. Dial the outside number. 
4. Press CONF when your call is answered. 
Considerations 
l Press the FLASH key to exit a Conference Call. 
l The Hold feature cannot be used during a three-party conference. 
Dial “0”:~for Attendant 
Description 
The Attendant can...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Related Programming 
- FFI (System): Second Attendant Position 
l FFl (System): Third Attendant Position 
l FFI (System): Fourth Attendant Position 
l FFl (System): Attendant Transfer Extension Position 
Direct Trunk Access 
Description 
Extensions can access a specific trunk for outgoing calls. Extensions can also use 
Direct Trunk Access to test trunks or to access data trunks. 
Operation 
1. Lift the handset. 
2....

Section 700, Feature Operation 
Issue 1, July 6, 1993 DSLT Features 
CPC-B, Version 4 
Do-Not-Disturb (DND) 
Description 
An extension can be made unavailable by activating Do-Not-Disturb (DND). When 
DND is activated at an extension, calls to that extension receive busy tone. 
Operation 
To activate DND: 
1. Lift the handset or press ON/OFF. 
2. Dial “73.” 
3. Replace the handset or press the ON/ OFF key. 
To cancel DND: 
1. Lift the handset or press ON/OFF. 
2. Dial “73.” 
3. Replace the handset or...

Section 700, Feature operation 
Issue 1. July 6, 1993 
Intercom Calling DSLT Features 
CPC-6, Version 4 
Descriptions 
The DBS provides two methods of intercom calling: voice calling and tone calling. 
Voice Calling. With voice calling, intercom calls are connected immediately, without 
a ringing tone. 
Tone Calling. With tone calls, a ringing tone is sent to the called extension. 
System programming determines whether the DBS uses voice or tone calling as a 
default. If voice calling is the default,...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Related Programming 
l FFl (System): Extension Intercom Calling 
l FFl (System): Alert Tone for Voice Calls 
l FFl (System): Extension Class of Service (CPC-B Version 4.0 or higher) 
l FF3 (Extension): Class of Service (CPC-B Version 4.0 or higher) 
Considerations 
l When an extension’s calling mode is set to voice calls, a “splash” tone can 
be sent to alert the extension to the voice call. System programming...

Section 700, Feature Operation 
DSLT Features 
Issue 1. July 6, 1993 
CPC-B, Version 4 
The Last Number Redial feature can redial a number up to sixteen digits 
long. 
A maximum of five Speed Dialing codes can be redialed. 
Meet-Me Answer 
Description 
You can answer a Paging call from any extension using the Meet-Me Answer feature. 
Operation 
1. Pick up the handset from any extension at which you hear the Paging call. 
2. Press “77.” 
l Paging will cease and you will be connected to the party trying to...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Message Waiting/Callback Request 
Description 
If you try to call an extension that is busy or does not answer, you can leave a message 
requesting a return call. 
Operation 
To leave a Callback Request: 
1. Lift the handset. 
2. Dial the extension number. 
3. Dial “2” at the busy tone or while the telephone is still ringing. 
4. Replace the handset. 
To answer a Callback Request: 
1. Pick up the handset. 
You will...

Section 700, Feature Operation DSLT Features 
Issue 1. July 6, 1993 CPC-B, Version 4 
Related Programming . 
l FFl (System) Extension Class of Service (CPC-B Version 3.01 or higher) 
l FF3 (Extension) Class of Service (CPC-B Version 3.01 or higher) 
Considerations 
l Up to four Callback Requests can be sent to any one extension. 
l If you call the same extension a second time and the party answers, any 
Callback Requests you sent earlier will be cancelled. 
l If a Callback Request is sent to an extension...