Panasonic Digital Business System Section 300 Installation Guide

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
c ! Related Programming 
- FFl (System): Call Forward No Answer Tier 
- FFI (System): Extension Class of Service (CPC-B Version 3.1 or higher) 
l FF3 (Extension): Class of Service (CPC-B Version 3.1 or higher) 
l FF3 (Extension): Permanent Call Forward Type (CPC-B Version 3.1 or 
higher) 
l FF3 (Extension): Permanent Call Forward Extension (CPC-B Version 3.1 
or higher) 
0 FFlO (System and Personal Speed Dial): System...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B. Version 4 
Call Hold 
Description 
The DSLT is provided with a HOLD key. The HOLD key is used to both place calls 
on hold and retrieve calls from hold. 
The HOLD key provides either exclusive or system hold, depending on system 
programming. With Exclusive Hold, only the station that held the call can retrieve it. 
with System Hold, another station can retrieve the call. 
Operation 
To place a call on Hold: 
Press the HOLD key....

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
* An error tone 
will sound if you attempt to place more than one call on hold 
at the same time. 
- The DBS can provide music-on-hold to callers placed on hold. See “Music- 
On-Hold” (page 2 1) for more information. 
Call Park 
Description 
You can use the Call Park function to transfer a call, even if you cannot locate the 
intended recipient of the call. Simply park the ca:l, then page the person to whom you 
would...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
Related Programming 
l FFl (System): Park Recall Timer 
Considerations 
l An alarm tone will sound if a parked call is not released before the Park 
Recall Timer expires (determined by system programming). If this 
happens, the user that parked the call can retrieve it by simply picking up 
the handset. If no one retrieves the call after the Park Recall Timer expires, 
a second alarm will sound at an attendant...

Section 700, Feature Operation DSLT Features 
Issue 1. July 6, 1993 CPC-B, Version 4 
. . .; 
i ‘i 
Related Programming 
- FFl (System): Extension Class of Service (CPC-B 3.1 or higher) 
* FF3 (Extension): Class of Service (CPC-B Version 3.1 or higher) 
Considerations 
* If more than one caller is attempting to reach the ringing extension, the 
Direct Call Pickup feature will answer the call that arrived first. 
Once the call has been picked up, other extensions that attempt to pick up 
the call receive...

Section 700, Feature Operation DSLT Features 
Issue 1. July 6, 1993 CFC-B, Version 4 
Considerations 
- If more than one call is arriving at the Paging Group, the Group Call Pickup 
feature will answer a caIl to the lowest port number fist. 
l If the called extension belongs to more than one Paging Group, the Group 
CaIl Pickup Feature will answer a call to the lowest numbered Paging 
Group first. 
l You can answer incoming calls, Intercom Tone Calling, or Intercom Voice 
Calling using the Group Call...

Section 700, Feature Operation DSLT Features 
Issue 1. July 6, 1993 CPC-B, Version 4 
I Considerations 
* In order to transfer a call by pressing HOLD, dialing the extension, and 
going onhook, the Onhook Transfer feature must be enabled in system 
programming. 
l You cannot transfer a call to an extension that has Do Not Disturb or 
Absence Message activated. 
l You can transfer a call to an extension that has Call Forwarding activated. 
The transferred call will follow the call forwarding path of the...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
To use Screened Transfer when Onhook Transfer is disabled: 
1. Press the HOLD key to place the outside call on hold. 
l You will hear intercom dial tone from the handset. 
2. Dial the extension number to which the call is to be transferred. 
3. When your call is answered, inform the third party of the transfer. 
l The EXT LED will stop flashing and remain lit. 
4. Dial “8.” 
l The third party need only pick up the...

Section 700, Feature Operation 
Issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
I Call Waiting 
Descfip tion 
You can send a Call Waiting signal, followed by a brief LCD message, to a busy 
extension. The party receiving the message need only replace the handset and then 
pick it up again to be automatically connected to the message sender’s extension. 
. ,. .- 
The following messages can be sent using the Call Waiting ‘feature: 
Table 15. Call Waiting Text Messages 
Message Code Message 
5...

Section 700, Feature Operation 
issue 1. July 6, 1993 DSLT Features 
CPC-B, Version 4 
To answer 
Call Waiting (after disconnecting the current call): 
1. Replace the handset. 
l The current call will be disconnected. 
2. Pick up the handset. 
l You will automatically be connected to the extension sending the Call 
Waiting. 
To 
answer Call Waiting (without disconnecting the current call): 
1. Press HOLD. 
l The current call will be disconnected. 
l The new call will be connected automatically. 
2. Press...