Panasonic Digital Business System Section 300 Installation Guide

Sectiori 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
To answer the callback ring: 
1. Pick up the handset when you hear the callback ring. 
l “Camp-on Call” will appear on the display. 
l The EXT LED will flash. 
l The system will automatically dial the called extension. 
2. Speak when your call is answered. 
Related Programming 
l FF3 (Extension): Call Waiting Notification Tone/OHVA 
Considerations 
l The callback ring must be answered within sixteen seconds...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-8, Version 4 
CO Line Key Trunk Access 
(All Versions) 
Description 
You can access an outside line by pressing a CO line key. 
Operation 
1. Press an unlit line key. 
l You will hear the outside dial tone. 
l The line LED will light green. 
l “CO TALK Wl” will appear on the display if you are using CO Line 1. 
2. Dial the telephone number. 
The dialed number will appear on the display. 
3. Pick up the handset and speak...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
Considerations 
l The duration of a call is shown on the display while the call is in progress. 
l In CPC-A and CPC-B Versions prior to 3.1, the SMDR Display Start Timer 
can be set to start after 16 seconds or 30 seconds after the last digit of the 
telephone number is dialed. 
In CPC-B Version 3.0 1 or higher, the timer can be set to start at 5, 16, or 30 
seconds. 
Conference Calls 
(All Versions) 
Des&p...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
l You will hear the outside dial tone from the handset. 
l “CO TALK #+O 1” will appear on the display if you chose CO line 1. 
3. If you pressed an unlit line key in step 2, dial the number of the party you 
wish to add to the call. 
The number will appear on the display. 
4. Press the CONF key when your call is answered. 
If you are now conducting a three-way Conference call involving outside 
line 2, CO 1,...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
Dial “0” for Attendant 
(All Versions) 
Description 
The Attendant can be called from any extension by simply pressing “0.” 
If multiple attendants are assigned, a dial “0” call will go to Attendant “1” first. If 
attendant “1” is busy, the call will then go to Attendant “2.” The call will continue to 
transfer to the next attendant in the attendant group if necessary. 
With CPC-A and CPC-B Version 1.0, a...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
Direct Trunk Access 
(All Versions) 
Description 
Extensions can access a specific trunk for outgoing calls. Extensions can also use 
Direct Trunk Access to test trunks or to access data trunks. 
Operation 
1. Press the ON/OFF key: 
l You will hear intercom dial tone from the speaker. 
l The ON/OFF LED will light. 
2. Dial “88,” then enter the desired line number (01 - 64). 
l You will hear the outside dial...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
Do-Not-Disturb (DND) 
(All Versions) 
Description 
An extension can be made unavailable by activating Do-Not-Disturb @ND). When 
DND is activated at an extension, calls to that extension receive busy tone. 
Operation 
To activate DND: 
1. Press the ON/OFF key: 
l You will hear intercom dial tone from the speaker. 
4 The ON/OFF LED will light. 
2. Dial “73.” 
l The DND/CF LED will light. 
l “DND Set” will...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-6, Version 4 
3. Press the ON/ OFF key. 
The ON/OFF LED will go off. 
Related Programming 
l FFl (System): Extension Class of Service (CPC-B Version 4.0 or higher) 
l FF3 (Extension): Class of Service (CPC-B Version 4.0 or higher) 
Considerations 
l Callback Queuing will ring an extension in DND. 
l A Private Line will ring an extension in DND. 
l Setting DND automatically cancels the Call Forwarding and Absence 
Message...

Section 700, Feature Operation 
Issue 1. July 6, 1993 Key Telephone Features 
CPC-B, Version 4 
EM/24 Console 
(All Versions) 
Description 
Connecting an EM/24 console to your extension increases the number of FF keys by 
twenty-four. By assigning extensions to its FF keys, you can use an EM/24 console as 
a BLF (Busy Lamp Field). ‘. .. A- 
Related Programming 
l FF3 (Extension): Terminal Type 
l FF3 (Extension): EM/24 Port Assignment 
Considerations 
l An EM/24 console can be connected to any key phone....

Section 700, Feature Operation 
Issue 1. July 6,1993 Key Telephone Features 
CPC-6, Version 4 
i ‘,, 
. 
Operation 
To assign pre-programmed codes to an FF key: 
1. Press the 
ON/OFF key: 
l You will hear intercom dial tone from the speaker, 
l The ON/OFF LED will light. 
2. 
Press the PROG key. 
“F’ will appear on the display. 
3. Press the FF key to be programmed. 
“Enter Code” will appear on the display. 
4. Enter the code to be programmed (see Table 9). 
The code programmed will appear on the...