Panasonic Digital Business System 576 Technical Manual Section 300

Section 300-Installation Chapter 6. Peripheral Equipment
576-13-300 DBS 576 (USA), issued 6/2/98 6-7 
PC Customization Tool
Guidelines
• You can connect a PC to an SCC card in an optional card slot to customize the 
setup without using a telephone for customization.
• SCC cards cannot be installed and removed while the cabinet is operating. First, 
turn the power off.
• If you are using a PC for customizing the setup, a Windows
®-based computer is 
required:
• Prepare an RS-232C cable.
• To send data...

Chapter 6. Peripheral Equipment Section 300-Installation
6-8 DBS 576 (USA), issued 6/2/98 576-13-300
Figure 6-4. Connections for D-SUB 9-pin to D-SUB 25-pin cable
• D-SUB 9-pin to D-SUB 9-pin
• If your PC is equipped with a 9-pin D-SUB RS-232C connector, make a 
cable as shown in Figure 6-5. The cable should be less than 50 ft. long.
Figure 6-5. Connections for D-SUB 9-pin to D-SUB 9-pin cable
Installation
1.  Set switch SW1 on the SCC card to the CTM position.
See Figure 6-4for details of SW1 positions. 

Section 300-Installation Chapter 6. Peripheral Equipment
576-13-300 DBS 576 (USA), issued 6/2/98 6-9 
Table 6-4.  Positions of SW1 on SCC card
2.  Install the SCC card in one of the optional card slots.
3.  Connect the 9-pin D-SUB connector on the RS-232C cable to the CN5 
connector (port 1) on the SCC card.
4.  Pass the RS-232C cable through the wiring slot in the cabinet, then connect the 
9-pin or 25-pin D-SUB connector on the other end to the RS-232C connector of 
your PC.
Figure 6-6. Connection to...

Chapter 6. Peripheral Equipment Section 300-Installation
6-10 DBS 576 (USA), issued 6/2/98 576-13-300
Call Logging Device
Guidelines
• You can connect a call logging device such as a call accounting machine or a 
printer to an SCC card in an optional card slot.
• SCC cards cannot be installed and removed while the cabinet is operating. First, 
turn the power off.
• A 9-pin to 25-pin or 9-pin to 9-pin RS-232C cable is required.
• Table 6-3 shows the pinout for the RS-232C ports (CN5 and CN6) of the SCC...

Section 300-Installation Chapter 6. Peripheral Equipment
576-13-300 DBS 576 (USA), issued 6/2/98 6-11 
• D-SUB 9-pin to D-SUB 9-pin
• If your call logging device is equipped with a 9-pin D-SUB RS-232C 
connector, make a cable as shown in Figure 6-8. The cable should be less than 50 
ft. long.
Figure 6-8. Connections for D-SUB 9-pin to D-SUB 9-pin cable
Installation
1.  Set switch SW1 on the SCC card to the SMDR position (see Table 6-4 for 
details).
2.  Install the SCC card in one of the optional card...

Chapter 6. Peripheral Equipment Section 300-Installation
6-12 DBS 576 (USA), issued 6/2/98 576-13-300
Figure 6-9. Connection to call logging device
Output Format
• You can use the system program to select format #1 or #2 for the call logging 
device.
• Figure 6-10 shows the output format and display contents for calls. 

Section 300-Installation Chapter 6. Peripheral Equipment
576-13-300 DBS 576 (USA), issued 6/2/98 6-13 
Figure 6-10. SMDR Output data format

 	



 


H

 



 



H



	





Condition code (I: Incoming call / S:DISA incoming call / D: DID.DDI incoming call / 
O: Outgoing call / L: LCR outgoing call / h: Hold / t: Transfer call /...

Chapter 6. Peripheral Equipment Section 300-Installation
6-14 DBS 576 (USA), issued 6/2/98 576-13-300
MIS Report Output
Guidelines
• Connecting a personal computer to the ACD card mounted on the flexible slot 
using the RS-232C cable (supplied) allows output of MIS Reports from the 
printer connected to the personal computer. You cannot connect a printer directly 
to the ACD card for output.
• The RS-232C cable (supplied) is a 9-pin D-Sub connector. If the connection port 
on the personal computer or...

Section 300-Installation Chapter 6. Peripheral Equipment
576-13-300 DBS 576 (USA), issued 6/2/98 6-15 
Figure 6-11. Connecting the ACD Card Personal Computer/Printer 

Chapter 6. Peripheral Equipment Section 300-Installation
6-16 DBS 576 (USA), issued 6/2/98 576-13-300
Application Interface (API)
Guidelines
• The application interface (API) card enables data from a range of applications 
such as voice mail and ACD to be sent to a PC.
• Control is provided by the RS-232C interface.
• Only one API card can be installed in a cabinet. The card must be installed in one 
of the optional card slots (OP1 or OP2) or in a flexible slot (FS1 to FS12). 
• Specific applications may...