Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-19
To use Specified Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-0-02: Intercom Voice Call Pickup
• FF1-2: Dial Plan
• FF3: Call Pickup Group Assignment
Considerations
• Extension Group Pickup - 12 / cabinet - maximum 72 group / 6 cabinet configuration
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialing the number of the 
ringing...

7-20 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO 
incoming trunk group.
Operation
To use Trunk Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF5-3: MCO Inbound Trunk Group Members
Considerations
•N/A
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number....

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-21
Considerations
• Calls on exclusive hold cannot be picked up.
Call Transfer
Description
The System allows you to transfer calls to either another extension or to an outside number. The 
transferred calls can be either supervised or unsupervised. (You can also use the Camp-on feature to 
transfer a call to a busy extension.)
Supervised Transfer
When completing a supervised transfer, the transferring party...

7-22 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To transfer a call to another extension without supervising the transfer:
To transfer a call to an outside number without supervising the transfer:
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Onhook Transfer at Ringback)
• FF1-0-03: Extension COS (Onhook Transfer at Talk)
• FF1-0-03:...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-23
Considerations
• On-Hook Transfer must be enabled for the transferring party’s Extension Class of Service 
(COS).
• If the call is not answered by the third party before the Transfer Recall Timer expires, the call 
will recall to the transferring extension.
• If a Transfer Recall is not answered before the Recall Duration Timer expires, the call will revert 
to the Attendant group.
• If the called party...

7-24 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To use Manual Camp-on:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
•FF1-2: Dial Plan
• FF1-0-03: Extension COS
• FF3: Extension COS
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See “To camp a call onto a 
busy extension:” on page 266. 
Conference Calls
Description
Conference Calls allow you to add another party to an...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-25
Operation
To establish a conference call:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Unsupervised Conference Call)
• FF1-0-01: Splash Tone (3-party conference)
• FF3: Extension COS
Considerations
• If all the internal parties hang up, the conference call will be disconnected. If the internal party 
remains in the conversation, the conference call remains in progress....

7-26 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To cancel DND for your own extension:
To set DND for another extension:
To cancel DND for another extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-0-03: Extension COS (DND Set/Clear)
• FF1-0-03: Extension COS (DND Set/Clear Other)
• FF1-2: Dial Plan
• FF3-0: Extension COS
Considerations
•...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-27
Flash Send
Description
Flash send allows you to send a flash to a CO line.
Operation
To send a flash on a CO line:
Related Programming
• FF1-2: Dial Plan
• FF5-5: Hot Line
Considerations
•N/A
Hot Line
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number 
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately...

7-28 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Intercom Calling
Description
The System provides two methods of intercom calling: 
•Voice Calling: Extension calls are connected immediately, without a ringing tone.
•Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating 
extension is voice or tone calling. Regardless of the default, you can toggle...