Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-29
Last Number Redial
Description
Last Number Redial allows you to automatically redial the last number dialed.
Operation
To automatically redial the last number dialed:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both 
intercom and CO...

7-30 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To answer a message waiting indication (Callback):
To cancel a Callback Message:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• The System has priority message waiting for 3rd-party voice mail. See “Voice Mail Integration 
(Third Party)”...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-31
Operation
After receiving an offhook signal during a call:
OR
NOTE: The steps outlined above can be performed only when the necessary settings have been 
programmed into the system.
Hardware Requirements
•N/A
Related Programming
• FF3: CO Off-Hook Signal
• FF1-1: Off-Hook Signal Timer
Considerations
• The CO call type may be either multiple ring, or DID/DIL whose destination is set to Auto camp-
on (Call...

7-32 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To make an OHVA :
Hardware Requirements
•N/A
Related Programming
• FF1 0 03 (System): Extension COS OHVA Originate
• FF1 0 03 (System): Extension COS OHVA Receive
• FF3 (Extension): Extension COS Assignments
• FF4: FF Key Assignment
Considerations
• If On hook Transfer is enabled, the held call is transferred as soon as the extension sending the 
OHVA hangs up.
• You cannot receive a Call Waiting...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-33
Meet-Me Answer
To answer a page using Meet-Me Answer:
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging. 
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made...

7-34 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
To use Reset Call to dial another extension (after a busy extension):
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
Considerations
• The second extension called using the Reset Call feature must have the same number of digits as 
the first extension.
Room Monitoring
Description
This feature allows the user...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-35
When a monitored extension receives a call, the caller hears a busy tone. Additional operations may 
be performed from the monitored extension when it is in monitored mode:
It is not possible to monitor an extension from an SLT telephone.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)
• FF1-2-02: Dial Plan at DT Pattern 1
•...

7-36 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored 
in PSD bins numbered 80-99. 
Operation
To assign PSD numbers:
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
Action Result
1.   Lift the handset. Intercom dial tone
2.    Enter the Speed...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576 (USA) issued September 2001 7-37
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters.
• Single Line Telephone SLT can only enter 0, 1-9, *, and #. If a pause, MCO code, intercom 
level, Dial Pulse (DP) - Dual Tone Multifrequency (DTMF) code, or SSD code needs to be 
programmed, use User Maintenance to program the speed dial.
System Speed Dial
You can store frequently called...

7-38 DBS 576 (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17 SSD Blocks
• FF1-0-02 SSD Digits
• FF1-0-03 Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• The system can be programmed to allow SSD Numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numbers 
longer...