Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-35
Operation
To automatically redial the last number dialed:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both 
intercom and CO calls, or CO calls only.
Message Waiting/Callback
Description
If you try to call an extension that is busy or...

6-36 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To answer a message waiting indication (callback):
To cancel a Callback Message:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/Cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/Cancel)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• The System has priority message waiting for 3rd-party Voice Mail. See “Voice Mail” on page 3-
60.
Offhook...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-37
Operation
After receiving an offhook signal during a call:
Note:For details about handling multiple calls, see “Call Hold” on page 6-16.
Hardware Requirements
•N/A
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be either multiple ring, direct, or camp-on.
• The system does not send the offhook signal under the following conditions:
•   During a conference call
•...

6-38 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To transfer a call using OHVA:
Hardware Requirements
•N/A
Related Programming
• FF1 0 03 (System): Extension COS OHVA Originate
• FF1 0 03 (System): Extension COS OHVA Receive
• FF3 (Extension): Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the 
OHVA hangs up.
• If the transferred call is...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-39
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Paging
Description
The System allows you to make both internal and external pages and announcements. Internal pages 
are made via the System’s key telephone speakers. External pages are made through the speakers of 
an external paging system connected to the System.
Paging calls can be answered from any extension using the Meet-Me...

6-40 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging. 
Related Programming
• FF1-0-02: Paging Override 
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to paging groups 0-9 
through the external speakers....

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-41
Related Programming
• FF1-2: Dial Plan
Considerations
• The second extension called using the Reset Call feature must have the same number of digits as 
the first extension.
• If you program the System for Reset Call, the following features are not available: Camp-on 
(Ext. no. + 2), Callback Request (Ext. no. + 3), Message Waiting (Ext. no. + 4, Ext. no. + 5), 
Intercom Busy Override (Ext. no. + 9).
Room...

6-42 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To set up the monitoring extension:
The monitoring operation can be allowed or denied by extension COS and is controlled by the Busy 
Override feature. If Busy Override is denied and the user attempts to monitor an extension, the user 
will hear a fast busy tone. 
Additional operations may be performed from the monitoring extension when it is in monitoring 
mode:
Services available on the monitoring...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-43
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring. 
• If the monitored extension is placed on-hook while Room Monitoring is activated, the 
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored 
extension will remain in the monitored mode, and can be accessed...

6-44 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to 
use.Action Result
1.   Lift the handset or press the ON/OFF key....