Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-25
Operation
To supervise the transfer of a call to another extension:
To supervise the transfer of a call to an outside number:
Unsupervised Transfer
When completing an unsupervised transfer the transferring party hangs up before the third party 
answers.
Operation
To transfer a call to another extension without supervising the transfer:Action Result
1.   While on a call, press the HOLD key. Intercom dial...

6-26 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To transfer a call to an outside number without supervising the transfer:
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Onhook Transfer at Ringback)
• FF1-0-03: Extension COS (Onhook Transfer at Talk)
• FF1-0-03: Extension COS (Onhook Transfer at Camp-on) 
Considerations
• On-Hook Transfer is...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-27
221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to 
extension 225.
• Calls can be transferred from paging using supervised transfer.
• If a call is unsupervised transferred to a busy extension, the call will camp on to the busy 
extension.
• To transfer to a outside party, it is best to use supervised transfer. If the trunk-to-trunk on-hook 
transfer...

6-28 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual Camp-on Send)
• FF1-0-03: Extension COS (Manual Camp-on Receive)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3-0: Auto Camp-on 
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See “Camping a Call Onto a 
Busy Extension” on page 6-26.
Conference...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-29
Operation
See Section 750 - Key Phone User Guide for operating instructions.
Hardware Requirements
• A Conference Card (VB-44120) must be installed in the System in order to conference more than 
four parties.
Related Programming
• FF1-0-03: Extension COS (8-Party Conference)
• FF1-0-03: Extension COS (Unsupervised Conference Call)
• FF1-0-01: Splash Tone (3-party conference)
• FF1-1-04: Conference Hold...

6-30 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
To set DND for your own extension:
To cancel DND for your own extension:
To set DND for another extension:
To cancel DND for another extension:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-0-03: Extension COS (DND Set/Clear)
• FF1-0-03: Extension COS (DND Set/Clear Other)
• FF1-2: Dial PlanAction...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-31
• FF3: Extension COS
Considerations
• Forced DND override is available.
• DND override function is available by Busy Override code.
DP to DTMF Signal Conversion
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from 
DP to DTMF signaling when using a DP trunk. For instance, if you dial into a Voice Mail system 
using a DP trunk, you can switch to DTMF...

6-32 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-1: Flash Timer
• FF2: Flash Pattern
• FF2: Flash Key Operation
• FF3: Flash on PROG (Recall)
Considerations
•N/A
Hot Line
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number 
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned...

Section 700 - Operation Chapter 6. DSLT Features
576-50-700 DBS 576 (USA) issued September 2001 6-33
•Voice Calling: Extension calls are connected immediately, without a ringing tone.
•Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating 
extension is voice or tone calling. Regardless of the default, you can toggle between voice or tone 
calling by entering the Tone-Voice Call feature code. For...

6-34 DBS 576 (USA) issued September 2001 576-50-700
Chapter 6. DSLT Features Section 700 - Operation
Operation
To make a call using Intercom Calling:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Calling Type)
• FF1-0-03: Extension COS (Voice Call Send)
• FF1-0-03: Extension COS (Voice Call Receive)
• FF3: Extension COS
Considerations
• Both the called and calling parties must belong to an Extension COS that allows Voice Calling.
• You cannot change from voice call to...