Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-77
To initiate Silent Monitor:
Note:The Silent Monitor key is disabled when the extension assigned to that key is idle, dialing, or 
ringing.
Silent Monitor Key Color Definitions
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Silent Monitor Initiate (0 = allow, 1 = deny, default = 1)
• FF1-0-03: Silent Monitor Receive (0 = allow, 1 = deny, default = 1)
Considerations
• Be sure all phones...

5-78 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Speed Dialing
Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD) 
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored 
in PSD bins numbered 80-99. 
You can assign up to 10 PSD numbers to the one-touch keys on a...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-79
To check a PSD number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• PSD number can be dialed from One-Touch keys. (For additional information, see “One-Touch 
Keys” on page 5-69.)
3.   Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4.   Enter the PSD bin number (80-99).
5.   Complete...

5-80 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
• Storing a new number erases any previously stored data.
• If the called party’s number and name are stored in the PSD code, that information appears on 
the display when you use the speed dial code.
• Speed dial numbers can contain up to 24 characters. The following table reflects which keys to 
use.
* Indicates that the digits that follow are either a feature access code or an extension...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-81
To dial an SSD number by entering the speed dial bin number:
To check an SSD number:Action Result
2.   (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3.   Enter the SSD bin number (00-79 or 000-799).Enter Spd Dial displays
4.   Dial the phone number.
5.   Press the HOLD key.Stored Spd Dial displays
6.   Replace the handset or press...

5-82 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To delete an SSD number:
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17: SSD Blocks
• FF1-0-02: SSD Digits
• FF1-0-03: Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• If numbers do not appear on the display when you use SSD codes (00-79 or 000-799), your 
extension is not programmed to display that data.
• The System can be...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-83
To link multiple SSD numbers to a PSD bin:
To use a PSD Key that links multiple SSDs:
To manually link speed dial keys together:
Hardware Requirements
•N/AAction Result
1.   Determine the SSD bin numbers to be linked
2.   Lift the handset or press the ON/OFF key.
3.   (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
4.   Enter the PSD...

5-84 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Related Programming
•N/A
Considerations
•N/A
Speed Dial Name Assignments
You can assign names to PSD numbers from a key telephone without entering the programming 
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD 
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16 
characters.)
Operation
PSD Names:
To set PSD...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-85
SSD Names:
To set SSD names using a large-display or small-display phone:
Example 1. Large-display phone
To  e n t e r  D:
a.  Press the first soft key on the top left.
Action Result
1.   Lift the handset or press the ON/OFF key.
2.   Press the PROG key.
3.   Press the * key.
4.   Enter 1 for the SSD Name Assignment mode.SSD NO.=>
SSD NAME displays
5.   Enter the speed dial bin number (00-79 or...

5-86 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third soft key from the top right.
b.  Press the third FF key from the left on the bottom row.