Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-47
Operation
To assign Fixed Feature codes to an FF key:
To assign Flexible Feature Codes to an FF key:
To erase a code stored on an FF key:
Note:You cannot use the following procedure to clear FF keys that have been assigned as CO lines. 
CO line keys can only be cleared through system programming.Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
2.   Press the PROG...

5-48 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
To check a programmed FF key (Display Phone Only):
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF3: Extension Numbers
• FF4: FF Key Assignment
Considerations
• If a new code is programmed into a key, the previously programmed code is erased.
• FF keys assigned as CO lines must be cleared using system programming before new FF 
assignments can be made.
• The System can be...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-49
Table 5-5. Feature access codes for FF key assignments
Handset Off-Hook Several held calls Latest held call will be transferred; phone gets 
internal dial tone.
No held calls Current call (talk) will be released; phone gets 
internal dial tone.
Feature DescriptionFixed Feature Code+ (additional digits to program into 
key)
Default Flexible 
Feature Code
(if not listed, must use 
Fixed Feature...

5-50 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Designated CO Access Button (for 
outgoing calls)∗02 88
Verified ID Code Send∗03 89
Floating Hold Answer 
Call Park Pickup (Ver. 2.0 or higher)∗04∗9
Priority Message-Waiting:  Send∗05∗41
Priority Message-Waiting:  Cancel∗06∗49
Message-Waiting:  Cancel∗07∗5
Message-Waiting:  Callback∗08∗6
Call Forward (All):  Set 70 + (Extension 0-9999) 721 + (Extension 0-9999)
Call Forward (All):  Clear∗09 731 +...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-51
Day 2∗26 761
Night 1∗27 762
Night 2  (for 2-Way VM)∗28 763
Paging∗29 + (Page Group No.) # + (Zone No.)
Meet-Me Answer∗30 ##
Call Pickup Group-All Calls∗31 701
Call Pickup Group-CO Calls Only∗32 702
Call Pickup Group-designated
(pick up a call in another Pickup 
Group)∗33 + (Call Pickup Grp 1-99) 703
Direct Call Pickup 73 + (Extension 0-9999) 704
CO Trunk Call Pickup
∗34 *0
Headset Mode On/Off...

5-52 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
VM Transfer Key 2 75 + (Ext.No. 0-9999)
Variable Mode *61
Call Logging Confirmation Mode 
Start*62
Station Call Park Hold/Answer *63
Station Call Park Hold *64 771
Station Call Park Answer (Own Ext.) *65 772
Station Call Park Answer (Other Ext.) *66 773
Station Call Park Transfer *67 774
Release Key *68
Answer Key *69
OHVA Key *70
Split Key *71
Walking TRS Key *72 *72
ANY Key *8 + (Up to 4 digits...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-53
Handsfree Answerback
Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press 1 
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension...

5-54 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
• Both the called and calling parties must belong to an Extension Class of Service (COS) that 
allows Voice Calling.
Handsfree Operation
Description
Handsfree Operation allows you to use all available System features without lifting the handset. Any 
speakerphone can be operated handsfree.
Operation
To initiate Handsfree Operation:
Hardware Requirements
•N/A
Related Programming
•N/A...

Section 700 - Operation Chapter 5. Key Telephone Features
576-50-700 DBS 576 (USA) issued September 2001 5-55
Operation
To answer calls using the Headset Operation:
Note:If Headset mode is already on, the following procedure turns it off. If Headset mode is off, 
this procedure turns it on.
Hardware Requirements
• A headset must be installed.
Related Programming
• FF1-0-3: Extension COS (Dial Tone Stop)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• Intercom Dial Tone is enabled/disabled...

5-56 DBS 576 (USA) issued September 2001 576-50-700
Chapter 5. Key Telephone Features Section 700 - Operation
Related Programming
• FF1-0-01: * and # Keys for Hot Dial Pad
• FF3 0: Hot Dial Pad
Considerations
Paging: The Hot Dial Pad cannot be used to initiate a page. 
Hot Line
Description
Hot Line enables you to immediately connect to another preassigned extension or speed dial number 
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned...