Panasonic Cz Rtc4cz Rtc3 Operating Instructions Manual

							15(EN)
Timer Reservation Weekly timer overview
You can set a weekly operation schedule.
•  The operation ON/OFF schedule or temperature setting schedule can be set\
 by setting the day and time (e.g. Setting the operation start time to 8:00\
 a.m. from every 
Monday to Friday.).
How to set (Overview)
(See P.16 for setting procedure)
• Select  “Day”
• Select  “Time”
* Select  “Operation”
•   Select “Temperature”
(Only for operations other than 
ON/OFF)
*Operation • ON: Starts operation with the temperature set last.
•  OFF:  Stops operation.
•  ON & TEMP: Starts operation with the speci fi ed temperature.
•  TEMP:  Sets the temperature to the specifi  ed temperature during 
operation.
Combination examples
 
 1. Stop operation earlier on “No-overtime work 
day”
8:00 17:00
8:00
22:00
ON
ON
OFFON
Weekday
No-overtime  work day
•  The setting registered for 1 day can be copied to other days. 
(P.19)
 
 2. Set the temperature higher after the fi  xed time.
8:0022:00
17:00ON (26 °C)
(28 °C)
ON & 
TEMPOFF
TEMP
 
 3. Stop operation during lunch break.
8:00 22:00
12:45
12:00ON ON
OFF
OFFOFFONON
 
 4. This Thursday is a holiday.The timer can be disabled only for the speci fi ed days with the 
registered schedules kept. (P.16)
• Disable (
) the timer of the specifi  c Thursday which falls on 
a holiday. 
• Enable (
) the timer after the holiday is over. 
						

							16(EN)
Timer Reservation Weekly timer
New registration•  e.g. Start operation with 26 °C at 10:00 a.m. on every 
Sunday.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Weekly timer].
▲ ▼ → 
3
Enable the Weekly timer.
▲ ▼ → ◄ ► → 
•  Select the item with ▲▼ and select []
(enable)/[](disable) with ◄ ►.
4Select [] for all days when the 
timer is used.
◄  ► → ▲ ▼ → 
(Repeat)•  Select the days with ◄ ► and select [] 
(enable)/[] (disable) with ▲ ▼.
5
Select the day for the timer setting.
◄ ►
6
Select the fi eld to register the timer 
setting.
▲ ▼ → 
•  Up to 8 settings are available for each 
day.
•  After registration, the items are arranged 
in time series automatically. 
						

							17(EN)
7
Set the start time for the timer 
operation.
hour               minute
▲ ▼ → ► → ▲ ▼ → 
•  0:00 to 23:59
8
Select the timer operation.
▲ ▼ → 
•  Types of timer operation
  ON:  Starts operation with the 
temperature set last.
  OFF: Stops operation.
  ON & TEMP.:  Starts operation with the 
specifi ed temperature.
  TEMP.:  Sets the temperature to the 
specifi ed temperature during 
operation.
9
 Set the temperature.
▲ ▼ → 
(Only for operations other than ON/OFF)
10
Confi rm the setting content.
Confirm and press  
.
(Press 2 times to 
fi nish.)
  To register additionally
Repeat from step 6 without pressing 
.
  To copy the setting content to other 
days (P.19)
To set the timer to OFFStarting with step 1, select [-] in step 3 and 
press  2 times.
To set the timer to OFF for 
specifi ed days after registration
(national holidays, etc.)
Starting with step 1, set [] for OFF days in 
step 4 and press 
 2 times. 
						

							18(EN)
Timer Reservation Weekly timer continued
Change/Delete
1
After steps 1 to 4  on page 16, 
select the day to change or delete.
◄ ►
2
Select the schedule to change or 
delete.
▲ ▼ → 
3
Select [Change] or [Delete].
▲ ▼ → 
4
Perform [Change] or [Delete] as 
follows.
• To change the setting, following  
steps 7 to 10 on page 17, set 
the time, timer operation and 
temperature and confi rm the 
content.
• To delete the setting, select [YES].
◄ ► → 
 →  
(Press 2 times to fi nish.)
  To change or delete settings repeatedly: Repeat from step 1 without pressing .
Note
  To delete all schedules of selected days
1Select the day in step 1  above and 
press 
.
2Select [Delete all: ] with ▲ ▼ and 
press 
.
3Select [YES] with ◄ ► and press 
. 
						

							19(EN)
Timer Reservation Weekly timer continued
Timer copyThe registered schedule can be copied to other days. 
This is convenient to apply the same schedule to multiple days.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Weekly timer].
▲ ▼ → 
3
Select [Timer copy].
▲ ▼ → 
4
Select the copy source day.
◄ ► → 
5Select [] for all copy target days.
◄ ► → ▲ ▼ → 
•  Select the days with ◄ ► and select [] 
with ▲▼.
• [
]: Copy source 
6
Select [YES]. 
◄ ► → 
 →  
(Press 2 times to fi nish.) 
						

							20(EN)
Filter Information
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select the item to set.
▲ ▼ → 
Filter information
3
Select [Next fi lter cleaning time].
▲ ▼ → 
4
Confi rm the operation time to the 
next cleaning.
(Press 2 times to fi nish.)
  When cleaning is immediately 
necessary
The screen shown on the right is 
displayed. Clean the fi lter.
(See operating instructions of the 
indoor unit.)
  After the fi lter is cleaned
Select [Filter sign reset] in step 3 
above and select [YES].
◄ ► → 
 →  
(Press 2 times to 
fi nish.)
(The fi lter cleaning time count is 
reset.) 
						

							21(EN)
Note
•  Depending on the model, [Filter 
info] cannot be used. In this case, a 
message is displayed as shown on 
the right.
•  When the cleaning time comes, the 
icon shown on the right appears on 
the top screen. 
						

							22(EN)
Quiet Operation/Power Consumption Monitor
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select the item to set.
▲ ▼ → 
Quiet operation
3
Enter the password.
▲  ▼ → ► → 
 
(Repeat)
4Set [Select enable/disable] to [].
▲ ▼ → ◄ ►
•  Select the item with ▲ ▼ and select []/
[] with ◄ ►.
5
Select [Quiet time].
▲ ▼ → 
6
Set the time to perform quiet 
operation.
▲  ▼ → ► → 
 →  
     (Repeat)(Press 2 times 
to fi nish.) 
						

							23(EN)
Power consumption monitor
3
Select the period to display.
▲ ▼ → 
 
4
Confi rm the information.
 (Press 2 times to fi nish.)
Note
•  Depending on the model, [Quiet operation] and 
[Power consumption monitor] cannot be used. In this case, a 
message is displayed as shown on the right.
•  Using the quiet operation function may deteriorate the performance to reduce the operation 
sound.
•  The power consumption shows an approximate calculation result, which may differ from the 
measurement result calculated by a power meter.
• Pressing ◄► can switch 
data of 1-week total and 
data of each day.
• Pressing ◄► can switch 
data of 1-year total and 
data of each month. • 1 day
Power consumption 
(approx.)
• 1 week
Power consumption 
(approx.)
• 1 year
Power consumption 
(approx.) 
						

							24(EN)
Energy Saving
  Temp auto return
Restoring the changed temperature to the originally set temperature 
automatically after a specifi ed time elapses. 
(e.g. Only when a guest comes)
  Temp range
Restricting the temperature range that can be set. (Temperatures outside the 
range cannot be set.)
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Energy saving].
▲ ▼ → 
3
Select the item to set.
▲ ▼ → 
Temp auto return
4Select the item and set to [].
▲ ▼ → ◄ ► → 
  To operate only when energy can 
be saved
Select [Return type] with ▲ ▼ and 
select [Saving] with ◄ ►.
5
Set the time to return to the set 
temperature.
▲ ▼ → 
(10 to 240 min: by the 10 min)
6
Set the temperature.
▲ ▼ → 
 →  
(Press 2 times to finish.)
  To set in series    Repeat from step 4 without pressing .