Panasonic Color Laser Multi-Function Printer Dp Mc210 Operating Instructions

10. Useful Information
81
10.5.1 Inserting an SD card
Insert the SD card (1) with the labelled surface facing 
upward into the SD card slot (2).
10.5.2 Removing an SD card
1
Push the SD card in (1).
2Pull the SD card (2) straight out.
File folder in an SD card
When you save files into the SD card, the following folder 
is made on the SD card.
SD:/PRIVATE/MEIGROUP/PCC/MFP/IMAGE/XXXXXX
(“XXXXXX” will vary depending on the unit.)Note:
LDo not delete or change the folder name on your 
computer.
LIf you use...

10. Useful Information
82
Option
10.6 Optional handset unit
You can add an optional handset unit. See page 7 for 
accessory information.
Important:
LBefore installing or removing the optional 
handset unit, be sure to turn the power switch 
OFF. For more details about the installation, 
please refer to the installation guide for the 
optional handset unit.
1Connect the handset cord (1) to the handset cradle.
2Connect the handset connector (2).
LRemove the cover (3) from the handset unit 
connection jack...

10. Useful Information
83
5Place the handset (9) on the handset cradle, then 
connect the handset cord (j) to the handset.
Note:
LWhile talking to the other party, you can send a fax 
using the scanner glass as follows.
1Press {V} or {^} repeatedly to select “Fax”.
2Press {} repeatedly to select “Send”. 
i {Black}
(To receive a fax, select “Receive”, and then 
press {Black}.)
To remove the handset unit
1.Disconnect the handset cord (1) from the handset, 
then remove the handset (2) from the handset...

10. Useful Information
84
10.7 Optional automatic duplex 
unit
You can add an optional automatic duplex unit. See page 
7 for accessory information.
A4, letter or legal-size recording paper (plain and thin) 
can be used.
Important:
LBefore starting installation of the optional 
automatic duplex unit, be sure to turn the power 
switch OFF. For more details about the 
installation, please refer to the installation guide 
for the optional automatic duplex unit.
LTo use the optional automatic duplex unit...

10. Useful Information
85
Do not touch the plate (1) on the left side of the 
optional input tray.
LDo not position the unit in a location where it is 
unstable or subject to vibrations. The unit weighs 
approximately 40 kg (88 lb) when the optional input 
tray is installed and the recording paper is fully 
installed.
10.9 Setting the optional input 
tray/optional automatic duplex 
unit
To use the optional input tray/optional automatic duplex 
unit with your computer, proceed as follows.
LThis setting is...

11. Help
86
For assistance, please contact an authorized Panasonic dealer.
11 Help Error Messages
11.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the 
confirmation and journal reports (page 46).
MessageCodeCause & Solution
Communication Error40-42
46-72
FFLA transmission or reception error occurred. Try 
again or check with the other party.
43
44LA line problem occurred. Connect the telephone line 
cord to a...

11. Help
87
For assistance, please contact an authorized Panasonic dealer.
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
DisplayCause & Solution
“Access Error”LThe access to an SD card did not work correctly due to some existing 
problem. Press {Stop} to clear the message, or remove the SD card, and 
then try again.
“Call Service”LThere is something wrong with the unit. Contact our service personnel.
“Change Supplies Toner...

11. Help
88
For assistance, please contact an authorized Panasonic dealer. “Check Pick Up Input 
Tray #1”LRecording paper was not fed into the unit properly. Re-insert the recording 
paper (page 105).
Note:
L“#1”: Standard input tray
L“#2”: Optional input tray
“Color Drum Life Low”
“Monochrome Drum Life 
Low”LThe drum cartridge life is near its end. Replace the drum cartridge as soon 
as possible.
“Color Drum Replace”
“Monochrome Drum 
Replace”LThe drum cartridge life is finished. Replace the drum...

11. Help
89
For assistance, please contact an authorized Panasonic dealer. “Memory Full”LWhen performing memory transmission, the document being stored 
exceeded the memory capacity of the unit. Send the entire document 
manually.
LWhen making a copy, the document being stored exceeded the memory 
capacity of the unit. Press {Stop} to clear the message. Divide the 
document into sections.
“Memory Overflow”LWhen printing a file, the document being stored exceeded the memory 
capacity of the unit. Press...

11. Help
90
For assistance, please contact an authorized Panasonic dealer. “RX Memory Full”LThe memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 15) or remove the jammed 
paper (page 101).
LIf feature #442 (page 65) is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
LIf feature #448 (page 65) is set to “On”,
– view, print or save the received fax documents (page 51, 52), and...