Panasonic Color Laser Multi-Function Printer Dp Mc210 Operating Instructions

9. Programmable Features
61
Setting the toner 
maintenance time
{#}{1}{5}{8}The unit will automatically activate for maintenance, once every 24 hours. 
Because this is to prevent the toner from solidifying, the noise that the unit 
makes during maintenance cannot be stopped. However, if the unit’s noise 
bothers you, you can change the start time.
1.{Menu} i {#}{1}{5}{8} i {Set}
2.Enter the maintenance start time.
LThe default time is “12:00AM”.
LPress {*} repeatedly to select “AM” or “PM”.
3.{Set} i...

9. Programmable Features
62
Setting the waiting time for 
the power save mode
{#}{4}{0}{3}To set the length of time before the unit enters power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
LWhen in power save mode, the unit needs to preheat the fuser unit before 
it can begin printing.
Holding the previous contrast 
setting
{#}{4}{6}{2}{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous...

9. Programmable Features
63
9.3 Fax features
Feature/CodeSelection
Printing a confirmation report
{#}{4}{0}{1}{0} “Off”: Confirmation reports will not be printed.
{1} “On”: A confirmation report will be printed after every fax transmission.
{2} “Error” (default): A confirmation report will be printed only when fax 
transmission fails.
Setting the journal report to 
print automatically
{#}{4}{0}{2}{0} “Off”: The unit will not print a journal report, but will keep a record of the 
last 30 fax transmissions...

9. Programmable Features
64
Setting the Error Correction 
Mode (ECM)
{#}{4}{1}{3}This feature is available when the sending / receiving fax machines are ECM 
compatible.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Fax transmission / reception will be carried out so that the 
errors do not occur.
Setting the connecting tone
{#}{4}{1}{6}If you often have trouble when sending faxes, this feature allows you to hear 
connecting tones: fax tone, ring back tone and busy tone. You can use these...

9. Programmable Features
65
Setting the memory reception 
alert
{#}{4}{3}{7}To alert you with a beeping sound when a received fax document is stored into 
memory due to some existing problem.
{0} “Off”: Deactivates this feature.
{1} “On” (default): You will hear a beeping sound.
Note:
LThe slow beeps will continue until you solve the printing problem and make 
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{4}{3}{8}To receive a fax automatically...

9. Programmable Features
66
Resetting fax features to their 
default settings
{#}{4}{5}{9}{0} “No” (default)
{1} “Yes”
To reset the fax features:
1.{Menu} i {#}{4}{5}{9}
2.Press {1} to select “Yes”. i {Set} i {Set} i {Menu}
Note:
LThe PC fax reception (feature #443 on page 24) will not be reset.
LIf you select “Yes”, the unit will print the received fax documents that have 
been stored into memory.
Setting the information for 
saving a fax document as an 
e-mail attachment (via an e-
mail server) (LAN...

9. Programmable Features
67
9.4 Copy features
Feature/CodeSelection
Setting the paper input tray to 
use for copy
{#}{4}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 61)
– Optional input tray (feature #382 on page 61)
If either is changed, “#1” will be...

9. Programmable Features
68
9.5 PC print features
Feature/CodeSelection
Setting the paper input tray in 
PCL
{#}{7}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 61)
– Optional input tray (feature #382 on page 61)
If either is changed, “#1” will be...

9. Programmable Features
69
Setting the font number in 
PCL
{#}{7}{6}{9}To set the font number to be used in PCL printing. The unit assigns a number 
to each font.
1.{Menu} i {#}{7}{6}{9} i {Set}
2.Enter the font number from “000” to “054”, using the dial keypad.
LThe default setting is “000”.
3.{Set} i {Menu}
Note:
LIf feature #768 is set to “Download Font”, the default setting is “001”.
LTo print the font list, see page 110.
Setting the font pitch/point in 
PCL
{#}{7}{7}{0}To set the font pitch/point...

9. Programmable Features
70
Setting mutual A4/letter print
{#}{7}{7}{6}This feature allows printing in A4-size even if letter-size recording paper is 
installed, and vice versa.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Printing is possible between A4/letter-size.
Feature/CodeSelection