Panasonic Color Laser Multi-Function Printer Dp Mc210 Operating Instructions

9. Programmable Features
71
9.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
scanning to your computer
{#}{4}{9}{3}{1} “Viewer” (default): The scanned image will be displayed in the [Quick 
Image Navigator]
*1/[Multi-Function Viewer]*2 window.
{2} “File”: The scanned image will be saved as a file.
{3} “E-Mail”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
*1 For Windows 2000/Windows XP/Windows Vista users
*2 For...

9. Programmable Features
72
Setting the information for 
scan to FTP (LAN connection 
only)
LThis feature can be 
programmed only through 
the web browser interface.When you send scanned files to an FTP server, you can register FTP 
destinations (up to 6 destinations) to the unit through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Advance Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 60). i [OK]...

9. Programmable Features
73
9.7 LAN features
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “Disabled”: Deactivates this feature.
{1} “Enabled” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{Menu} i {#}{5}{0}{1} i {Set}
2.Enter the IP address of the...

9. Programmable Features
74
Approving users for the LAN 
connection
{#}{5}{3}{2}{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will deny/approve access from the pre-programmed 
IP patterns. Whether to deny or approve, and up to 4 patterns can be 
programmed through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Network Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 60). i...

9. Programmable Features
75
9.8 Direct print feature
Feature/CodeSelection
Paper input tray setting for 
direct print
{#}{6}{6}{9}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 61)
– Optional input tray (feature #382 on page 61)
If either is changed, “#1”...

9. Programmable Features
76
9.9 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
FeatureTa bSelection
Setting the LAN 
features[LAN Feature]Enter the LAN feature settings. See page 73 for details.
Setting the community 
name for SNMP[SNMP]Enter the SNMP community name. Consult your 
service provider or network administrator for details.
Setting the location 
where you use this unit[SNMP]Enter the location information of the unit.
Displaying...

9. Programmable Features
77
Registering 
destinations for the 
error notify feature[Error Notify]Enter the e-mail address to which error notifications will 
be sent and select the types of problems.
[Life Warning]: A warning indicating that the toner 
cartridge, drum cartridge or waste toner cartridge 
needs to be replaced soon.
[Media Path Error]: An error indicating that there is a 
problem with the paper input tray.
[Life Error]: An error indicating that the toner cartridge, 
drum cartridge or waste...

10. Useful Information
78
10 Useful Information U se ful  In for m at i on
10.1 Character entry
The dial keypad is used to enter characters and 
numbers.
–Press {} to move the cursor.
– Press dial keys to enter characters and numbers.
–Press {Back} to erase the character or number 
highlighted by the cursor. Press and hold {Back} to 
erase all characters or numbers.
– To enter another character located on the same dial 
key, press {>} to move the cursor to the next space, 
then press the appropriate dial...

10. Useful Information
79
10.2.2 Using Device Monitor
You can confirm the setting information and current 
status of the unit from your computer.
1Start Multi-Function Station.
2[Utilities] i [Device Monitor]
LThe [Device Monitor] window will appear.
3Confirm the status of the unit.
[Status]: Current status of the unit
Note:
LAdditional information (toner and recording paper 
status, unit information, etc.) will be displayed in 
[Status] tab by clicking [Advanced Information].
LYou can update the status...

10. Useful Information
80
10.4 Changing the color 
calibration
If color printing is too dark or too light, change the color 
calibration.
1Select the desired color to change the calibration.
LTo change the color density for cyan, magenta, 
yellow and black, press {Menu}. i 
{#}{4}{8}{5}
LTo change the color calibration for cyan, press 
{Menu}. i {#}{4}{8}{6}
LTo change the color calibration for magenta, 
press {Menu}. i {#}{4}{8}{7}
LTo change the color calibration for yellow, press 
{Menu}. i...